If you don’t have a pipe cutter, Home Depot has one in their store and will cut it for you for free.
What diameter is a closet rod?
Closet Rod Dowel Diameter
A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.
How long can a closet rod be?
The maximum pole length is 36″, and the maximum length for a continuous shelf is 40″. Your design consultant can recommend the best design to accommodate any space, no matter how wide, by combining our products to optimize your space.
Will Home Depot cut metal for you?
Unfortunately, Home Depot does not cut metal sheets, metal rods, or metal roofing in-store as of 2022. However, some Home Depot stores will cut metal pipes. Alternatively, customers can buy and rent tools from Home Depot for cutting metal or visit Lowe’s and Ace Hardware for various metal-cutting services.
Can you cut a metal curtain pole?
Metal curtain poles can be cut with a hacksaw, or for a totally square cut, use one of our special curtain pole cutters. Wooden curtain poles can be cut with a fine tooth wood saw. Helpful Hint: Always remember that when you are cutting a curtain pole that is in two pieces you must trim equal amounts from each side.
How do you cut a piece of metal?
An angle grinder fitted with an abrasive metal-cutting disc works well to cut all kinds of metal, including bolts, angle iron, rebar and even sheet metal. But the discs wear down quickly, cut slowly and shrink in diameter as you use them. Instead, we recommend using a diamond blade that’s rated to cut ferrous metal.
How long can closet rods go without support?
You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability. The same general rules apply to kids’ closets.
How many pounds can a closet rod hold?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
Is a wood or metal closet rod better?
Wood rods use a shelf support and a hook for the rod. Metal rods are integral to the shelf and are supported with various wall anchors. When supporting these, you will get more support and stability when you install into the studs, regardless of whether the rod is made of wood or metal.
How much do clothes weigh on Rod?
Six feet of oval aluminum anodized rod can hold 45 pounds. The same length of rod can hold 170 pounds if it’s made of 1 5/16-inch steel polished chrome. On average, jeans weigh 1 1/2 pounds, shirts 1/2 pound and suits 4 pounds.
Will Lowes cut metal rods?
Does Lowe’s Cut Metal Rods? Lowe’s is able to cut rods within their stores upon request. Contact your local Lowe’s to ensure they can cut the material your rod is made from.
Does Home Depot do rip cuts?
Home Depot actually says on their saw that they won’t do rip cuts, although most employees will do them, when treated nicely. Most Home Depot stores also have a radial arm saw, which allows them to cut dimensional lumber, 1” and 2” thick to length.
Will Lowes cut tin for you?
Go to the commercial sales desk at your local Lowe’s for details.Lowe’s also offers free pipe threading and cutting for any size of galvanized or black iron pipe. The process involves a machine‐based cutting operation with a metal wheel that creates threads in the ends of pipes.
What tool is used for cutting metal?
Hacksaw. The original metal-cutting tool, the manual hacksaw, is an easy, inexpensive option for cutting through metal (and a slew of other materials). Ideal for small projects and home improvement needs, the hacksaw is typically one of the first tools a homeowner purchases, thanks to its low cost and versatility.
Will a hacksaw cut metal?
A hacksaw blade can cut many types of materials. A hacksaw is a versatile type of saw useful for cutting a variety of materials for projects around the home. One of the benefits of owning a hacksaw is that one blade can successfully cut metal, plastic and wood.
What’s the best way to cut a metal pole?
- Fit your saw with a carbide blade. Carbide is an extremely hard material mixed into metal saw blades to allow them to cut steel and other metals.
- Mark a line for your cut using a chisel or the edge of a saw blade.
- Secure the pole.
- Cut the pole.
- Smooth the cut edges.
Can you cut curtain poles to fit?
All metal and wood poles can be cut down to size, but remember that once cut, they cannot be returned to store.
How do you cut aluminum poles?
Use a wood-cutting saw with carbide-tipped blades to cut most aluminum. Select a fine-toothed blade and don’t cut aluminum with a wall thickness of more than 1⁄4 inch (0.64 cm). If possible, choose a saw blade that creates narrow kerfs (the notch or slot made by the saw).
Can pliers cut metal?
Diagonal pliers are useful for cutting copper, brass, iron, aluminium and steel wire. Lower quality versions are generally not suitable for cutting tempered steel, such as piano wire, as the jaws are not hard enough.
Can you cut metal with a hand saw?
There are hand saws for cutting wood, drywall, metal and plastic. Even though hand saw uses vary and choosing the right saw for the job is important, the basic technique for using a hand saw is the same.
How do you cut metal wire without tools?
It’s possible to use a hacksaw to cut wire if no cutter is available. You’ll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.
Contents