Why Won’T My Iphone Connect To Homepod?

Make sure that your device is updated to the latest version of iOS or iPadOS and has the Home and Music app. Make sure that your iPhone, iPad, or iPod touch is updated to the latest version of iOS or iPadOS. Also check that the Music app and Home app are installed on the device that you’re using to set up HomePod.

How do I connect my iPhone to HomePod?

Set up HomePod

1. Plug HomePod in to power.
2. Unlock your iPhone, iPad, or iPod touch and hold it next to HomePod.
3. Follow the onscreen instructions to choose your HomePod settings.
4. When asked, center HomePod in the viewfinder on your iPhone, iPad, or iPod touch to complete pairing.
5. Wait for HomePod to finish setup.

Why is AirPlay not working on my HomePod?

AirPlay isn’t connecting
Check to make sure your HomePod is plugged in.Make sure that your iPhone or iPad is connected to Wi-Fi and Bluetooth and that the HomePod is connected to the same Wi-Fi network. If you’re streaming audio from Apple TV, make sure AirPlay is turned on on your Apple TV.

Why is my HomePod not connecting?

If you recently changed your Wi-Fi password or moved HomePod to a new location, wait a few seconds, then ask Siri a question to see if HomePod is connected to Wi-Fi.If you set up HomePod to use one of these networks, you’ll need to reset HomePod and set it up again on a different Wi-Fi network.

Why is Apple AirPlay not working?

Try these steps first
Make sure that your AirPlay-compatible devices are turned on and near each other. Check that the devices are updated to the latest software and are on the same Wi-Fi network. Restart the devices that you want to use with AirPlay or screen mirroring.

Why is my screen mirroring not working?

Screen mirroring usually works over a WiFi connection and so you do not need Bluetooth enabled on your TV. Since Bluetooth is a wireless technology, it may cause interference with your connection. Turn the Bluetooth feature off on your TV and then try again.

Can I AirPlay from iPhone to Mac?

Thanks to the release of macOS Monterey, Apple has introduced full AirPlay support on Mac, which means you can now ?AirPlay? content from an iPhone or iPad straight to your Mac, or even from one Mac to another Mac.

Where is the 8 digit code on HomePod?

The serial number is on the bottom of HomePod and HomePod mini.

How do I connect my Mac to HomePod?

Open an app on your Mac that can stream content. Click the AirPlay button (available only if your HomePod or another external device is on the same Wi-Fi network as your Mac). , depending on the app. Select the checkbox next to your HomePod in the list of devices, then choose some content to stream from your Mac.

Why is my HomePod blinking white?

HomePod second warning light: blinking white light
This means that is ready to be set up for the first time. Or, that an alarm or a countdown has just gone off.

What Wi-Fi is HomePod connected to?

Wi-Fi network
HomePod automatically connects to the same Wi-Fi network as your iOS or iPadOS device.

How do you fix unsuccessful pairing?

What you can do about Bluetooth pairing failures

1. Make sure Bluetooth is turned on.
2. Determine which pairing process your device employs.
3. Turn on discoverable mode.
4. Make sure the two devices are in close enough proximity to one another.
5. Power the devices off and back on.
6. Remove old Bluetooth connections.

Why won’t my iPhone Bluetooth connect?

You should first make sure Bluetooth is turned on and try connecting your device in the Bluetooth settings. If your iPhone still won’t connect to Bluetooth, you can try deleting other devices from Bluetooth settings, updating your iOS software, resetting your network settings, or restarting your iPhone entirely.

How do I pair Apple devices?

Pair your device with a Bluetooth accessory

1. On your device, go to Settings > Bluetooth and turn on Bluetooth.
2. Place your accessory in discovery mode and wait for it to appear on your device.
3. To pair, tap your accessory name when it appears onscreen.

How do you reset AirPlay on iPhone?

If you have been having trouble with AirPlay following an iOS update, try these steps:

1. Force restart your device – read about how to force restart your iPhone (or iPad) here.
2. Reset your network settings on your iPhone or iPad in Settings > General > Reset, and tap on Reset Network Settings.

How do I connect to AirPlay?

To do this on your Apple TV, go to Settings > AirPlay.

1. Connect your iPhone and TV to the same WiFi network.
2. Open the Control Center on your iPhone.
3. Then tap Screen Mirroring.
4. Next, select your Apple TV device you want to mirror.
5. Finally, enter the AirPlay passcode.

How do I turn AirPlay on my iPhone?

How do I activate AirPlay on my iPad, iPhone or iPod touch?

1. Ensure that your Apple TV and your iOS device are connected to the same internet network.
2. Swipe up from the bottom of the screen to open the control centre.
3. Tap the ‘AirPlay’ option.
4. Select the device you want to connect to (Apple TV)

How do I fix my iPhone screen mirroring?

Fix screen mirroring not working on iPhone 12 Pro

1. Reboot your iPhone.
2. Restart your TV.
3. Check your Wi-Fi.
4. Check that the devices are on the same Wi-Fi network.
5. Get closer.
6. Make sure that The destination device support screen mirroring.
7. Make sure you have the latest updates installed.
8. Contact Apple.

How do I mirror my iPhone to my macbook wirelessly?

On the iOS device, swipe up from the bottom bezel to open the Control Center. From the Control Center click AirPlay. Choose the Mac to which you wish to mirror from the list, then enable Mirroring.

How can I mirror my iPhone to my Smart TV?

Connect your iOS device to the same Wi-Fi network as your Apple TV or AirPlay 2-compatible smart TV. Find the video that you want to AirPlay. Tap the screen mirror icon In some third-party apps, you might need to tap a different icon first. * In the Photos app, tap share, then tap the screen mirror icon.

Why is AirPlay not showing on my Mac?

Check firewall settings on Mac
If the AirPlay is not showing up on Mac, go to System Preferences > Security & Privacy > Firewall, if Firewall is turned on, uncheck “Block all incoming connections” and check the “Automatically allow signed software to receive incoming connections”.