The batties in your SimpliSafe Keypad need to be replaced. It’s helpful to note that the flashing blue light is intended more as a heads up notification, rather than an indication of something more serious, like a break-in or environmental anomaly.
Why is my SimpliSafe blinking?
You’ve got the Original SimpliSafe system.
What do the lights on my Original SimpliSafe Base Station mean?
LED Status | What does it mean? |
---|---|
Blinking Blue | There is a message for you on your keypad regarding an error or recent event |
Solid Blue | System is armed or in Test Mode |
Intermittent Red Blinking | No cellular connection |
Single Red Blink | The Base Station sent, or is sending, a signal |
How do you stop SimpliSafe from flashing?
Why my Simplisafe Base Station is Blinking Blue?
- Disconnect your Simplisafe Base Station from the power socket, if connected.
- Now, remove the batteries from the Base Station device.
- To do it, turn the Base Station upside down.
- Open the battery door using a screwdriver.
- Take the batteries out of its slot.
How do I reset my SimpliSafe keypad?
Open the battery door with a screwdriver and remove the batteries within the battery compartment. Hold on for about 30-45 seconds. Plug the base back into the wall socket. Now, replace the batteries removed from the base station.
Why is SimpliSafe flashing blue?
A blinking blue light means that there is a message on the Keypad!
Why is my SimpliSafe keypad not working?
Either unplug the base station and bring it closer to the keypad, or slide the keypad off its bracket and bring it closer to the base station. Try to arm the system through your keypad, and see if it works. If it does, try moving your base station to a slightly closer location to your keypad.
What does it mean when SimpliSafe is flashing red?
SimpliSafe All-New Base Station
If your device is flashing red rapidly, it means that a recent alarm has been triggered. Before attempting to diagnose and troubleshoot your issue, it’s crucial to verify which model you’re using, as the red lights are used to indicate different messages depending on the system.
How do you know if SimpliSafe is armed?
Home and Away both mean the system is armed, but different sensors are active in each. You can change the sensor settings for each mode at any time via the SimpliSafe app, but the default settings are below.
HOME MODE.
Entry Sensor | Active |
---|---|
Camera (motion detection) | Off (privacy shutter still opens for alarm trigger events) |
Why does my SimpliSafe keypad says out of range?
Keypad Out of Range is a generic message that appears on your Keypad whenever the device is not communicating with your Base Station.The Keypad is too far away from the Base Station. There is some other device between your Keypad and Base Station that is inhibiting their ability to communicate with each other.
How do I pair my SimpliSafe keypad?
If you’re using your keypad to pair them together, go to your keypad’s menu screen, select Devices, your lock, and then choose PIN Pad. When lock is pairing mode, hold down PIN Pad’s lock button for 5 seconds. The Base Station will confirm the PIN Pad has synced with the voice prompt, PIN Pad added.
How do I reboot my SimpliSafe base station?
Simply unplug the power cord to your Base Station and, while unplugged, remove a battery (you’ll need a screwdriver to get to the battery compartment). Wait a few seconds, and then put the battery back in and plug in the power cord – the Base Station will then come back on.
Does SimpliSafe keypad light up?
Does your Keypad look like the one pictured to the left? Then you’re in the right place! You’ve got the Gen 3 SimpliSafe system.
What do the lights on my SimpliSafe Base Station mean?
LED Status | Description |
---|---|
Off | System is Unarmed. |
Blue | System is Armed, Home or Away. |
Amber | Update Downloading/Installing to Keypad. |
Amber “Search Light” | Base Station Update Installing. |
The Keypad is used to arm and disarm your system. Also, in case of an emergency Keypads have a red panic button, which will trigger the alarm if you press and hold it for more than two seconds. Customers can change their system and device settings through their Keypad’s menu as well.
Can you have 2 keypads for SimpliSafe?
Every SimpliSafe package comes with a free wireless keypad, but you can purchase an additional one for $69.99.
Why doesn’t my ring keypad light up?
When your keypad isn’t plugged in, the power save mode and mode buttons will stay lit when it detects motion. When the keypad is in power save mode, it will not light up until a button is pressed.If the keypad’s motion sensor is triggered, it will turn on the interface.
Is SimpliSafe easily hacked 2021?
SimpliSafe is not easily hacked
While it’s technically possible to hack into anything, calling it easy is extremely misleading.
By adding a panic button to your system, your security alarm can protect you and your family when you’re home, whether or not your system is armed!Alternatively with a SimpliSafe panic button, if you don’t want to alert an intruder to the authorities, you can set your panic button to ‘silent alarm’ or ‘duress’.
Does SimpliSafe detect pets?
SimpliSafe is pet-friendly, so there’s no fear! SimpliSafe’s motion sensors are infrared heat sensors and won’t detect small pets, typically up to 50 lbs. This way, your pets can freely roam around your house and the motion sensors will not detect them. Any person who walks by will still trip the alarm.
Can you use two base stations with SimpliSafe?
SimpliSafe does not have a range extender or the ability to link two base stations. The DIY set-up method to ensuring maximum range on your security system is to move your sensors and base station around testing them intermittently until you find a configuration that works.
Is SimpliSafe coming out with outdoor cameras?
SimpliCam is the only camera that SimpliSafe provides till now. The announcement of SimpliSafe outdoor camera was done but there is no report of it coming soon.
Simplicam-A Brief Guide, Specifications and Features.
Features | |
---|---|
Night Vision | Yes |
Resolution of Video | 720p HD |
Two way Audio | Yes |
Compatibility with Smartphone | Yes |
How long do SimpliSafe batteries last?
How long do the batteries last?
Component | Battery/Batteries Used | Average Battery Life Expectancy |
---|---|---|
Entry Sensor | 1 CR-2032 Lithium 3V | 5-10 years |
Motion Sensor | 1 CR-2032 Lithium 3V | 3-5 years |
Glassbreak Sensor | 1 CR-2032 Lithium 3V | 3-5 years |
Smoke Detector | 1 CR-123A Lithium 3V | 3-5 years |
Contents