There are three reasons why an Ecobee thermostat may be rebooting often: The wiring to the thermostat is damaged, loose, or installed incorrectly. The furnace is overheating. The HVAC unit needs to be cleaned or serviced.
Why does my thermostat keep restarting?
This is extremely uncommon, but it can happen. If your non-programmable thermostat is resetting or changing your set temperature, the problem may be with the batteries. Check the batteries if they need changing.If your thermostat doesn’t have a common wire and is resetting, you should replace it.
Why does my thermostat keeps shutting off?
So, if your furnace keeps turning off and on too quickly, your thermostat might be malfunctioning or broken. There are several things that could be causing your thermostat to not work properly. The wiring could be old and need replacing, it might need new batteries, or it could be the location of your thermostat.
How long does it take for an Ecobee thermostat to calibrate?
The Calibrating message on your Ecobee thermostat screen indicates that it is measuring the current indoor temperature. Ecobee calibrates once it’s installed initially or when it reboots, and it typically takes around 5 to 20 minutes.
How do I troubleshoot my Ecobee thermostat?
Open the panel on your furnace to expose the control panel where your thermostat wires are connected. Most systems have a purple 3 or an orange 5 amp fuse on the boardcheck this fuse to ensure that it’s intact. A blown fuse will have to be replaced. Once a blown fuse is replaced, the ecobee should power back on.
Why is my thermostat clicking on and off?
The underlying cause of a clicking thermostat is purely mechanical. A thermostat has a circuit inside it that is connected whenever your thermostat realizes it needs to change the temperature.This is perfectly normal, and it usually means your thermostat is working how it should.
How do I reset my Ecobee thermostat?
How to Factory Reset an ecobee Smart Thermostat
- From the Home screen, press Menu.
- Select Settings.
- Go to Reset.
- Choose Reset All Settings then confirm your selection by pressing Yes.
- Choose the reset option that suits your needs:
- The ecobee thermostat will be reset to factory defaults.
How do I reboot my Ecobee?
You can reboot the Smart Si thermostat by pressing the physical hardware reset button, located through an opening in the bottom left corner of the Smart Si thermostat. Rebooting will not alter programming or configuration options.
How long does an Ecobee thermostat last?
Ecobee states a battery life of 5 years (you can replace it yourself, when the time comes) and claims it’s smart enough to not be triggered by pets.
Why does my Ecobee keep running?
This is a common problem with Ecobee and other smart thermostat systems. If this setting isn’t switched to auto, your fan could be stuck running all the time. With the fan in auto your system is going to automatically run the fan whenever it needs to adjust the temperature of your home.
Does Ecobee thermostat have a battery?
The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.
Is my Ecobee broken?
If the product is defective, call Customer Service at 1-877-932-6233. ecobee will make the determination whether a replacement product can be sent to you or whether the product should be returned to our address.
How do I make my thermostat not click?
If you dislike the sudden noise of a click, there are a few options available. An easy fix is getting additional insulation around your thermostat. This can dampen the sound from the click to keep it from disturbing you. You can also take a look at smart thermostats with integrated circuits.
Why is my thermostat making a noise?
If a thermostat makes a buzzing or fizzing noise when switching this is normally as a result of the switch contacts in the thermostat becoming dirty. The noise is the contacts arcing as they close.Typically this will happen if the load they are switching is particularly inductive or capacitive.
Do thermostats make noise?
All thermostats make a clicking noise when activating the heating or cooling system. The noise does not mean that you have a problem, and it should not be very loud. Sensitivity to noise varies among individuals as well, and the sound might be more noticeable to you than to others.
What happens when you reset Ecobee thermostat?
If you choose to “Reset All,” your ecobee will be wiped clean and returned to factory settings. Your ecobee account will be deleted, as will your schedule, preferences, and equipment configuration. You will need to set up your ecobee from scratch once again.
How do I wake up my Ecobee thermostat?
When you want to wake your Ecobee up, you need to: What is this? Select the Menu option on the thermostat and then select Schedule.
- On the schedule page, tap on the ‘+’ icon.
- Select your desired Comfort setting.
- Add the desired start time and click on save.
What is RC and RH on ecobee?
The c in Rc stands for cool, the h in Rh stands for heat. The red wire connects to both by way of a jumper bridge. If you look closely at the image, you will see it. The Ecobee3 connects the Rc and Rh terminals automatically which means you can choose either Rc or Rh to plug the wire into.
Why is my ecobee offline?
If your ecobee is connected to your home network but is unable to connect to ecobee servers, the issue may be caused by security settings on your router. To check if your ecobee is connected to ecobee servers, go to MAIN MENU > ABOUT > WI-FI > CONNECTED TO ECOBEE.COM.
Why is my ecobee thermostat not cooling?
Your ecobee thermostat is powered off or is frequently rebooting. Water leakages, puddles of water, or signs of moisture around the air conditioning unit. An overflowing or full condensate drain pan. Signs of water damage around the drain pan or condensate drain line.
Who is ecobee owned by?
Generac
Share All sharing options for: Ecobee acquired by generator company Generac for $770 million. Toronto-based smart home thermostat startup Ecobee is being acquired by Generac Holdings for $770 million, the companies announced Monday.
Contents