Locate the red reset button on the back of the lock. Press and hold the red reset button until the red light turns off (about 5 seconds). The lock will reboot and show a long green flash of the LED. Go to Lock Settings in the August App and try to set up HomeKit again.
How do I fix my august lock?
Below are steps on how to fix it:
- Taking the smart lock off of your door and turning it on its back.
- Undo the latches on both sides to remove the metal cover and use a Philips #0 screwdriver to take off the cover.
- Take out the gears and replace them to get your smart lock working again.
Why is my August app not working?
General Troubleshooting Steps
Make sure your phone’s OS is on the latest version and that your lock’s firmware is up to date. Stand near your Smart Lock and open the August App on your phone. Check that you can lock and unlock your door using the August App.
Can you manually turn August Smart Lock?
Yes you can turn the August Lock manually to latch/unlatch the deadbolt manually from the inside. Additionally, you can use your existing key from the outside.
How long does August LOCK last?
The team at August estimates the lock’s batteries should last three to six months.
Why does my august lock beep?
A lock jam is another cause for the morse code sound. If you suspect that your lock is jammed, remove the lock from your door and check for any obstructions preventing the deadbolt from being thrown smoothly.Scroll down and find the option Calibrate Lock. Follow in-app recalibration instructions.
How do you power cycle August lock?
Power Cycle Your Phone
Press and hold your iPhone’s sleep/wake button until you see the option to slide to power off, then power your phone off. Once your phone is powered off, press and hold the sleep/wake button to power it on again. Once powered on, open the August App.
How do I auto lock my august lock?
How to Enable Auto-Lock on Android
- Open the August App and select the applicable property from the keychain if there is more than one.
- Tap the Settings Gear Icon in the top right-hand corner on the lock circle screen.
- Select the lock from the devices shown.
- Select Auto-Lock, which is listed in the automations menu.
What is August auto unlock?
Auto-Unlock is a feature that automatically unlocks your door when you arrive home, without having to reach for your phone or your keys. If you’re an Android user…
Why is my Yale lock not working?
If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.
What happens if August Smart Lock battery dies?
When your August smart lock battery dies, the lock stops working electronically, meaning you can’t unlock it via the App on your phone until the batteries are replaced. But you can manually unlock your door (with a physical key) via the original deadbolt, as August locks fit with the existing deadbolt on your door.
How do you unlock August Smart Lock without phone?
How Do I Enter My Home and/or Disable Access if My Phone is Lost or Stolen?
- Go to the website account.august.com.
- Select the link Login with email from the bottom of the screen.
- Enter your email and password to login.
- Login to your email account and retrieve the verification code.
Can August lock work without WiFi?
Do August smart locks work without Wi-Fi? Yes, August smart locks can be operated without Wi-Fi as they can also connect via Bluetooth or Z-Wave. However, you need Wi-Fi if you’re looking to control your lock remotely. If you’re still curious about how the August smart lock works, you want to continue reading.
Does Smartlock drain battery?
Yes, the battery in smart lock will drain faster if you connect it to the Wi-Fi Bridge. It’s because the smart lock needs to be connected to the Wi-Fi Bridge at all times. The connection between these two devices will consume the battery of the smart lock.
Does August work with ring?
August Smart Lock Pro also works with Ring Alarm. Ring Alarm is a DIY security system that incorporates security sensors, Z-Wave, Zigbee, and Ring cameras. With the integration, you create rules for your lock and security system to follow. For example, you can set it to arm your system when the door is locked.
How do you open a stuck Yale lock?
Here are some troubleshooting steps to try:
- Open your door.
- Slowly use the thumb turn inside your home to extend the deadbolt all the way to the locked position, then retract it back to the unlocked position.
- Close your door.
- Again, use the thumb turn to extend and retract the deadbolt.
Why is my Yale lock blinking?
What Does This Mean? If the lock makes an unusual beep when locking or unlocking and the face of the lock flashes odd numbers (1, 3, 5, 7, 9) in an X pattern, the lock is jammed. This means the deadbolt is not able to fully extend into the door strike, or the motor in the lock is malfunctioning.
How do I reset my Yale Keyless Door lock?
To perform a factory reset of your Nest x Yale Lock:
- Remove the battery cover and batteries.
- Remove the inside of lock to access the reset button.
- The reset button (see image) is located on the left side of the PCB cable connector.
- While pressing the reset button (for a minimum of 3 seconds), reinstall the batteries.
Why does my August lock keep going offline?
Your Connect may be offline due to an Internet connectivity issue.If you’ve checked your connection and the Internet is working, try the following to reboot your August Connect: Unplug the device from the outlet. Plug the Connect back into the outlet.
How do I reset my electronic lock?
A factory reset will delete all codes associated with the lock.
- Make sure the door is open and unlocked.
- Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
- Press and release the program button. You will hear one short beep.
How do I connect to my august lock?
Android
- Open the August App and select the associated Home from your Keychain.
- Select the gear icon to navigate to Lock Settings.
- Select the associated device to open Lock Settings.
- Scroll to the Utilities section and select Connect to Wi-Fi Network.
- Select BEGIN WI-FI SETUP.
Contents