If you are able to connect with the August App, but you still get No Responsein the Home App it might be due to the following: Another user or phone is connected to the lock via the August App. Another HomeKit controller is currently connected to the lock. Your lock may need to be set up with HomeKit again.
https://www.youtube.com/watch?v=QOBIWNffUwc
Does August WIFI lock work with HomeKit?
Yes, if you have a compatible Apple bridge within Bluetooth range of your August Smart Lock that is setup to work with HomeKit. You can then use Siri remotely or operate remotely through the August app.
How do you reset HomeKit?
HomeKit Reset – Wi-Fi Smart Lock
Remove the faceplate so you can see the LED. Press and hold the small red button on the back of the lock. Notice that the Red LED will blink fast (at a rate of 8 times per second). After the Red LED stops blinking, let go of the red button.
If you are unable to operate the Smart Lock remotely using the App, your Connect Wi-Fi bridge may be offline. This article can help you get your August Connect back online. If you are unable to operate your Smart Lock using the App, we recommend rebooting the device.Try operating the lock using the App.
Can Siri unlock August lock?
This request also works with Siri & Apple HomeKit (only with the August Smart Lock Pro) and Amazon Alexa, with both August Locks, by stating, Hey Siri/Alexa, please unlock my door.
How do I use August Smart Lock with Siri?
Open the August app on your iPhone and click the gear icon at the bottom right. Tap on your lock and select Home Settings then tap Enable Siri. When prompted, add a new HomeKit house or choose an existing one to add your August Smart Lock and then select which room to associate it with.
Can you manually unlock August Smart Lock?
Here’s the genius of the August Smart Lock, though: It replaces the interior portion of your currently installed deadbolt. Nothing changes on the outside of your door, and you can still manually open the door from the inside by simply turning the outer rim of the Smart Lock, just like you would a door knob.
How do you install August doorbell to HomeKit?
PLEASE NOTE: You should update your operating system to the latest available iOS release before setting up HomeKit.
- Open the App and go to Lock Settings.
- Select HomeKit.
- Select Enable HomeKit.
- Select Continue.
- Remove the faceplate from the front of your Smart Lock to find the HomeKit code.
Can you use August Smart Lock without connect?
The August Wi-Fi Smart Lock has everything built inside and can connect to the Internet without a Connect Bridge. If you have an August Smart Lock or a Smart Lock Pro (Generation 1, 2, or 3), your smart lock will function locally via Bluetooth connection without a Connect Bridge.
How do I disable HomeKit August lock?
Go to Lock Settings for the lock you would like to set up again. Tap on HomeKit. Tap Remove HomeKit Accessory. Go to the Home App and confirm that the lock no longer appears.
If you are unable to connect your Wi-Fi Smart Lock to HomeKit via the August App, reset your device for HomeKit setup. There is a small red button located on the back of the Wi-Fi Smart Lock. You will need to remove the lock from the mounting plate on your door in order to access the button.
Why is my HomeKit not working?
Reboot all the things
For HomeKit troubleshooting, rebooting your HomeKit hub, iOS device, and even the accessory itself is one of the quickest and easiest ways to make an unresponsive accessory available again. Rebooting a HomeKit accessory usually requires just unplugging it from the wall, or removing its batteries.
How do I fix my august lock?
Below are steps on how to fix it:
- Taking the smart lock off of your door and turning it on its back.
- Undo the latches on both sides to remove the metal cover and use a Philips #0 screwdriver to take off the cover.
- Take out the gears and replace them to get your smart lock working again.
How do I reset my august lock?
To perform a hard reset on your Connect, leave the device plugged in and hold the reset button down for 5 seconds, then let go. You should see a pulsating green light, which indicates that the device is back in set up mode.
How do I fix August connect?
Check that your wireless router is plugged in and powered on. Then, connect your Wi-Fi to a computer or other device to ensure it is working properly. Your Wi-Fi name and/or password may have changed. Reset the Connect by holding down the button for 3 seconds and set up again using the August App.
What door locks work with Siri?
Homekit Smart Locks
- August Smart Lock Pro 3rd Gen. Our Review.
- Schlage Sense. Our Review.
- Kwikset Premis. Our Review.
- Yale Assure Lock SL. Our Review.
Does August Smart Lock work in Australia?
A key that works everywhere. Lock the front door. And unlock it. From anywhere.
What can be used as a HomeKit hub?
Set up HomePod, HomePod mini, or Apple TV as a home hub
HomePod, HomePod mini, and Apple TV automatically set up as home hubs, so you can control your home even when you’re not in it, and run automations right away.
Will ring ever work with HomeKit?
Ring works with Apple HomeKit using a Homebridge hub or device. To set it up, install the Ring plugin for Homebridge and obtain the refresh token for setting up the Ring plugin using the email, password, and two-factor authentication code for your Ring account.
Does SimpliSafe work with HomeKit?
It works with the biggest names like Amazon Alexa and Google Home. But did you know that SimpliSafe also plays well with Apple HomeKit, Apple Watch, and August smart locks? And fingers crossed that it’ll soon work with IFTTT.
Can August LOCK be hacked?
It is possible for August Smart Lock to be hacked, but it is not common. August Smart Lock is connected to the user’s Wi-Fi, and can also be paired to smart devices through Bluetooth. This makes it possible for hackers to manipulate the smart lock through other connections. This is rare, but possible.
Contents