The In-Home Display Only Shows Gas or Electricity Reading Don’t stress, this might be an easy fix. Press the on/off switch and disconnect the charger to reset the IHD. Then plug it all back, hold the switch and wait for it to reconnect. This should usually fix the issue.
Why is my smart meter not showing electric?
Try moving your In-Home Display closer to your electricity smart meter. Once you’re there, turn it off using the round, flat button at the back. Wait a minute and then press the button again to switch the IHD back on. Sometimes, this gives it the boost it needs to get going again.
Why is my IHD only showing gas?
If the IHD is only showing gas data it is usually where the IHD has a connection to the gas meter but not the electricity so it is only able to draw one set of readings.
Does a smart meter show gas and electric?
Smart meters measure how much gas and electricity you’re using, as well as what it’s costing you and display this on a handy in-home display.
How do I reset my smart meter?
To reset it it turn it right off by holding down the power button for 10 seconds and then power it back on again, it should work.
How do I turn my gas back on with a smart meter?
Manually Reconnecting your 2nd Generation Smart Meter using your IHD
- Press the menu icon (it’s in the bottom right of your screen).
- Press TOP UP.
- Choose the fuel you want to reconnect.
- Press OK.
- Enter the 20-digit code you’ve got via email or text (you’ll get separate codes for electricity and gas).
Why is my gas meter not showing a reading?
If your gas meter screen is blank
Your gas meter is battery powered so to save power the screen will be blank. To take a reading from your gas meter, press the round button between the two arrowed buttons and the reading will show on screen.
How do you reset a smart meter bulb?
In this article:
- Unplug the IHD and let it run out of power completely.
- Leaving the IHD unplugged, restart it by pressing the round, flat button on the back.
- Let the emergency power reserve run out completely.
- Plug the IHD in to recharge it, then switch it back on.
Why is my smart meter showing waiting for data?
Your In-Home Display uses a wireless signal to receive energy usage information from your smart meters. If your In-Home Display shows Waiting for data, it could be because it’s too far away from your smart meter. Try moving your In-Home Display closer to your electricity smart meter.
How do I connect to IHD WIFI?
Connecting your black IHD3
- Press Menu/OK to bring up the menu.
- Press the forward Arrow until you see Settings [OK]
- Menu/OK to select Settings.
- Press the forward Arrow until you see Switch on Wi-Fi and press Menu/OK.
- Press the forward Arrow until you see Join Network and press Menu/OK.
Do you need separate smart meters for gas and electricity?
Do I need one smart meter for gas and another for electricity? Yes, if you’re a dual-fuel customer, both meters will need to be replaced. Your supplier will aim to install both meters on the same visit to make things as easy as possible.
How do I reset my British gas smart meter?
Restore my electricity supply using my meter
- Look at the meter reading screen on your electricity meter.
- Press A twice.
- Press B to restore the electricity supply.
How do I pair my smart meter display?
It usually takes about three hours. Press and hold the power button on the back of your smart meter display to turn it on. To turn it off, press and hold the same button for five seconds. Each time you turn the smart meter display on, it will show ‘Welcome to IHD2’ then ‘Attempting to pair’.
Why is my smart meter not showing gas EDF?
Why is my smart meter display showing electricity information but not gas? If your meters have been installed in the last week please wait a couple more days as it can take longer for the gas to update for the first time. If it’s been more than a week give us a call on 0333 009 7000.
How do I know if my smart meter is faulty?
If the meter stops, turn on 1 appliance at a time and check the meter. If the meter starts to move very quickly, the appliance could be faulty. If the meter is still moving, it’s probably faulty.
How do I turn on my gas supply on my smart meter SSE?
Gas smart Pay As You Go meter
- Press the Black button (button B).
- You will see the message, Appliances Off? Hold A For Gas.
- Press and hold the Orange button (button A) until you see the message, Release A For Gas.
- Take your finger off the button and wait.
- You should see a screen that shows available credit.
How do I turn my gas back on after disconnecting?
You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.
How do I get a meter reading from a gas smart meter?
To read the meter:
- press either of the buttons on your meter.
- wait until you see ’01’ with numbers followed by ‘M3’
- write down the number from left to right.
- ignore any zeroes at the beginning and any numbers after the decimal point.
How do you manually read a smart meter?
To read the meter:
- press the middle button – it should say ‘R1’
- write down the number below ‘IMP’ from left to right – this is usually your night or ‘off-peak’ reading.
- press the middle button again – it should say ‘R2’
- write down the number below ‘IMP’ from left to right – this is usually your day or ‘peak’ reading.
What do the lights on my smart meter mean?
Top answer. posted by Davc | 4 years ago. Re: Smart electricity meter indicator lights.
Will my British Gas smart meter work with bulb?
If you have a smart meter and you pay for your energy by Direct Debit, you can switch to Bulb.
Contents