There are almost countless reasons why a smart plug might just disconnect itself. These range from faulty plugs to an overloaded Wi-Fi network. Most of these issues can be quickly resolved so your smart home can get back up and running.
How do I reset my Smart Life outlet?
Reset the smart plug to factory defaults, then follow the initial setup instructions again. Unplug the Smart Plug, then press and hold the power button. Continue holding the button, plug the Smart Plug into an outlet, then release the button when you hear a click (about 4 seconds). The LED will be solid.
Why has my smart plug stopped working?
If your Amazon Smart Plug stopped working, restart your device. Unplug your Amazon Smart Plug from the outlet, and then plug it back in. Reset your Amazon Smart Plug: press and hold the button on the side of the device for 12 seconds.
How do I reconnect my Smart Life plug?
Plugged the socket into an outlet. Press and hold the on/off button for 5 seconds until the light is flashing. 4. On your phone with the “Smart Life” app is running, select Add Device or the “+” icon to connect your device to a socket.
Current Rating | 10 Amps |
---|---|
Control Method | App, Remote, Voice |
Why do my smart lights keep disconnecting?
A power outage, router, or internet service provider disruption. If your smart device loses power by a light switch being toggled off or a fixture being turned off.If there are changes to your network, a new network name, new network password, or a new router or range extender could all disconnect your bulb.
Why is my Smart Life plug offline?
Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.
How do I fix unresponsive Alexa lights?
- Check your home network. If a device Alexa connected to is unresponsive, start by checking your Wi-Fi.
- Confirm the device has power.
- Check the manufacturer’s app.
- Check the Alexa Skill.
- Toggle the Alexa Skill.
- Uninstall and reinstall the device manufacturer’s app.
- Power cycle the device.
- Update the firmware of your device.
Why are my magic home lights offline?
Please check if your Smart Light is too far from router? These may reduce the wifi signal, then cause the offline problem. For Smart Strip Controller, please make sure the power is DC constant voltage power supply.Please try to restart the router, wait 3 minutes and observe the status of the device.
How do I reconnect my smart life light bulb?
Reset Smart Home Devices
- Turn on the bulb for three-to-five seconds and then off for three-to-five seconds. Repeat this multiple times and turn it on again. If reset was successful, the bulb blinks.
- Turn off the bulb.
- Restart Discovery.
- Turn on the bulb.
How do I reset my Alexa smart plug?
Reset Your Amazon Smart Plug
- Press and hold the button on the device for 12 seconds.
- Release the button once you see the red LED light. A blue LED blinks when reset is complete.
- Register your Amazon Smart Plug in the Alexa app.
Why is my Alexa glitching?
Often, an unresponsive Echo can be the result of a faulty Wi-Fi connection. To start, try performing a hard reset of all your network hardware; starting with your Echo Dot, then your router, then your modem.The closer you can get your Echo Dot to the main location of your router, the better off you’ll be.
How do I reconnect my magic home to WiFi?
Change wifi on phone to the bulb’s controller. Will look like LEDXXXXXXX. It will connect and phone will warn no internet, then go to app and discover bulb. Click on the settings icon in left, top corner and connect bulb to home wifi network.
How do I reset my magic home lights?
You have to turn your power (light switch that controls your bulb) OFF & ON 4 times (wait about 3-5 seconds each time you power OFF & ON….don’t just flick your light switch OFF & ON super fast). At the End of the 4th time when you turn in the bulb, your bulb quickly flash for about 20 seconds then your bulb is reset.
Why is my smart life bulb not connecting?
Make sure the bulb is blinking when you try to connect to Wi-Fi. Only then will you be able to connect through the Smart Life application “Add Device”. Turning the power on and off 3 times quickly will reset the device.
Video: This is the best smart speaker
First-generation Amazon Echo (and Dot): Locate the reset button on the bottom of the Echo speaker. Then use the end of a paper clip to press and hold the button for 5 seconds. The light ring on the device will turn orange and spin, signifying that it properly reset.
How do I sync my Alexa plug?
How to Connect a Smart Plug to your Alexa
- Plug your smart plug into an outlet.
- Download the app that goes with your smart plug app.
- Set up your smart plug in the app.
- Launch the Alexa app.
- Tap the menu on the Alexa app.
- Select Skills & Games.
- Tap the magnifying glass to search for your smart plug skill.
Contents