On average, when Hisense TVs say No Signal, it tends to be due to an issue with the input or source. The correct HDMI cable might not be connected properly, or the source may be otherwise disconnected. There may be other issues that cause the No Signal message to appear on a Hisense TV.
How do you fix the TV when it says no signal?
Check the cable connections between the TV and your video device or receiver. Change the channel or try a different input device or movie. The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.
Why does my TV say no signal when HDMI is plugged in?
The “no signal error” on a TV is due to using the wrong HDMI cable, a faulty graphics driver or a damaged HDMI port.
Why does my TV have a blue screen and says no signal?
The issue where the TV displays a blue screen with no picture most commonly occurs with older systems where you’re TV is connected to a set-top box or a VCR using a coaxial cable and it’s required to set your TV to channel 3 or 4 to receive the signal.
How do you check if a TV aerial is working?
Test Your TV Aerial Cable
If you have a second TV in your home, connect it to the aerial point that you find problematic. After that, wait for the scanning of TV channels. Another way to check the TV aerial is to take the TV to a socket that you are sure is working correctly and perform a test.
What input should my TV be on?
If you’re using a coaxial cable, your television’s on-screen input list will usually label it as either TV or ANTENNA. On the back of the television it will usually be labeled ANTENNA or a variant of it, such as ANT. Most televisions will also need to be on either channel 3 or 4 when using a coaxial connection.
Newer Hisense Roku or Android TV models have a physical reset button located at the back portion of your device. Look for a button labeled as reset and use a toothpick or a pen to press on it. Make sure that your TV is turned on while doing this. Wait for it to reboot twice or more before you release the reset button.
While generic remote controls can work seamlessly on other functions, resetting is different. Does Hisense TV have a reset button? Unfortunately no.
Why is my Hisense TV not working?
If your Hisense TV won’t turn on, first ensure that the power cord is correctly seated in the back of your TV and then try a different wall outlet. If the TV still doesn’t turn on, unplug it from the wall, wait 60 seconds, then plug it back in.
Why is my Hisense TV blue?
If your TV screen has a blue tint, it can be because of a manufacturing defect in the backlight blue LED. In this case, you will have to get your backlight replaced. The last and the most common cause behind the blue tint or any tint is the problem in the picture and display setting.
How do I get my HDMI to work on my Hisense TV?
Plug the connected devices into the HDMI port on the TV before switching it on. 3. Using your remote, select the Inputs icon in Home screen and select the corresponding HDMI input. Because the HDMI connector provides video and audio signals, it is not necessary to connect an audio cable.
Why is my aerial not picking up channels?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
Why is my antenna not picking up channels?
If you have loose cables, you’ll most likely get no signal or a spotty signal. So make sure your connections are tight at your TV and your antenna. While you’re checking your connections, also take a look at your cables to make sure they aren’t bent, looped, or otherwise broken.
How do you know if you need a new TV aerial?
If the picture of your TV keeps breaking up or freezing, if the sound keeps dropping out or if you struggle to get signal at all, you may be experiencing poor aerial signal.
What does no signal input mean?
The “No input signal” message can sometimes appear if the POST process is failing, and the computer cannot boot properly. If the POST process is failing and the computer is not starting up, the motherboard could be at fault.
What does no input detected mean?
Applicable Products and Categories of This Article. This error message means the input signal from a connected device is not being detected or the correct input is not selected.
How can I check if my HDMI port is working?
How to Tell If My HDMI Port Is Bad?
- Right-click “Computer.” From the context menu that appears, click “Properties.”
- Click “Device Manager.”
- Look at the status of your HDMI port in the dialog box. If the status reads “This device is working properly,” your HDMI port is functioning.
How do I get my TV back to HDMI?
Use the HOME screen
- On the supplied remote control, press the HOME button.
- Select the Inputs icon from the menu in the upper right of the TV screen.
- Select the preferred input.
How do I know if my HDMI cable is working?
Signs and Symptoms of a Bad HDMI Cable
- “Shooting stars” or sparkling in the picture.
- Fuzzy or blurry picture.
- No picture or intermittent picture.
- No sound or intermittent sound.
- Weird colors in the picture.
- Remotes don’t work.
How do I update my HiSense TV?
The first option is to update your Hisense TV software directly. Go to Settings on your TV. You can find the Support option under the General tab. You can also select System Update from the list of options.
How do I unlock my Hisense TV?
How to Get Your Hisense TV Off of Lock
- Press the “Menu” button on the remote control. The TV menu will appear.
- Tap “Channel ^” or “Channel v” to scroll the cursor between the menu options. Select “Function” and press “OK.”
- Select “Parental Control” and press “OK.” Enter the TV’s password when prompted.
- Tip.
Contents