It’s most commonly a thermostat or heating coil issue, which can be verified with an electrical tester. Another sign a water heater component is going bad is when the unit triggers a shut down every time hot water is called. If the breaker is tripping, an electrician can determine why the unit is shorting out.
Why does my hot water heater keep cutting off?
If your gas water heater keeps shutting off, the thermocouple could be dirty, bent or damaged. The thermocouple is usually easily visible next to the pilot light. Inspect the thermocouple to determine if it is dirty or damaged in some way. If it is dirty, turn off the gas to allow the thermocouple to cool.
Somewhere on your electric water heater, you’ll find a reset button. It’s usually red and often located near the thermostat. It may also be hidden behind a removable metal panel on the unitand then behind some insulation.If your water heater now has power, you’re all set.
How do I know if my water heater thermostat is bad?
If you turn the hot water tap and cold water runs out, then the upper thermostat is damaged. But if the water is hot that becomes later becomes cold, then you have a damaged lower thermostat.
Why does my water shut off randomly?
If you’re not getting any water in your home, it’s likely because of a problem with the water main. If you have an emergency shut-off valve, it could have accidentally triggered and stopped your water flow, or the valve could be open and impeding your water supply because it’s leaking.
The high resistance caused by a loose wire produces a substantial amount of heat that can eventually cause fires. If there is a loose electrical connection within your water heater’s system, your reset button’s thermometer can trip (regardless of the water’s temperature) if it picks up the heat from that loose wire.
How much does it cost to replace a water heater thermostat?
The average thermostat replacement cost is between $100 and $300. Most other repairs are equally affordable. There are two main types: gas and electric. A gas unit works by way of a gas flame while an electric one works using electric elements, or coils.
How do I troubleshoot my electric water heater thermostat?
First, reset any tripped circuit breaker, and replace any blown fuse. Next, check if power is being supplied to the electric water heating element thermostat. Test the element, and if it’s faulty, replace it.
What is the most common problem with water heaters?
Water leaks are perhaps the most common type of water heater issue you’ll face. Any water heater will start to leak eventually, as by nature water will eventually corrode your tank and create microscopic cracks or fractures.
How many years does a water heater last?
It would be nice to know when the time is right to replace your water before it springs a leak and causes an inconvenience or worse yet, damage to your home. Typically a residential hot water heater lasts between 6 and 13 years. Beyond 12 years, you are on borrowed time!
What is the life expectancy of a water heater?
8 to 12 years
The type of water heater and where you are located: While many say 8 to 12 years is the expected life for a standard gas-powered water heater, this range can change and be very dependent on where you are located. The level of sediment in your tank affects the lifespan of your water heater.
Can a thermostat go bad on a hot water heater?
Upper Thermostat Failure – If your upper thermostat (or heating element) is defective, then the water heater will stop heating water entirely.Lower Thermostat Failure – If your lower thermostat (or heating element) is defective, you’ll either notice the hot water is lukewarm or the hot water quickly runs out.
What should my hot water tank thermostat be set at?
120 degrees Fahrenheit
The short answer: 120 degrees Fahrenheit. This is the preset thermostat temperature in most new water heaters, and it’s the recommended setting of the U.S. Department of Energy. At this temperature, harmful pathogens like the kind that cause Legionnaires’ disease are prevented from multiplying and may be killed.
How does an electric water heater thermostat work?
The thermostat is a thermistor that responds to heat by producing a small electric current. The current increases when water temperature increases, and drops when temperature drops. Changes in the electric current cause gas control to turn ON and OFF. When gas control turns ON, it releases gas to burner.
Contents