Why Does My Chainsaw Bar Smoke?

This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.

Should my chainsaw smoke?

While a chain saw does produce some heat while in use, it should never overheat or begin smoking.The most likely causes of smoking and overheating are a lack of air and/or a lack of lubrication to the engine or the chain saw chain guide bar.

Why is my chainsaw blade smoking and not cutting?

This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.

Why is my chainsaw burning the wood?

Sharpening the chain to prevent the chainsaw from heating up and burning the wood. When you notice that the wood is burning, it is also possible that the chain is not sharp enough. This phenomenon is explained when you have repeated use of the equipment and unfortunately on your side you have never done its maintenance

How do you stop a chainsaw from overheating?

To prevent chainsaws from overheating they must be cleaned regularly. The cylinder and starter both contain air intake areas that pull cool outside air into the engine when it’s running. If dust, wood chips or other material blocks these systems, the engine will start to overheat.

See also  Can You Be A Photographer Without A Degree?

How often should I flip my chainsaw bar?

Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.

How long should a chainsaw last?

That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.

How tight should chainsaw blade be?

The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it.

Will cutting wet wood dull a chainsaw?

Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.

Is it worth sharpening a chainsaw?

Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.

See also  Can You Weld Ar400 Steel?

Why is my electric chainsaw smoking?

The electric chainsaw smokes from the lubricating oil.
Do not hesitate to remove the oil from your tank by trying another oil with increased lubricity. If the problem is with the oil, the electric chainsaw gives off a blue smoke, very characteristic of an oil problem.

Should you rotate the bar on a chainsaw?

Chainsaw bars don’t wear evenly.Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.

What is dressing a chainsaw bar?

A tool designed to preserve your guide bar.
This maintenance tool removes normal wear and minor damage as it dresses your bar rails back to a 90-degree square edge. Redress your STIHL chain saw guide bar rails to 90 degrees to keep the saw chain cutting straight.

What chainsaw chains do professional loggers use?

Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.

When should I replace chainsaw chain?

Once the wear markers have been met it’s essential to replace the chainsaw chain. Filing past the wear marker will greatly reduce the chain’s cutting performance, and increases the risk of the tooth breaking off. Ideally you should reach the tooth and depth gauge markers at roughly about the same time.

See also  Is Singapore A Hindu Country?

How many times can a chainsaw be sharpened?

Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.

Contents

This entry was posted in Mounts & Rods by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!