This happens when someone has changed the settings by mistake or the default settings do not work. Open the Blink camera app from the smartphone and then open the camera settings. Go to the motion detection section and do locate the sensitivity slider.
Why is my Blink camera detecting motion but not recording?
Sometimes, if the camera has a weak connection to your wireless router, it can cause the camera to record false motion clips. Increasing the retrigger time should resolve this issue.Power cycling the camera may also resolve this issue. Try removing and then reinserting the batteries or the USB cable connection.
How do I get my Blink camera to detect motion?
To test notifications, head to the Blink app home screen, arm the system, ensure that the camera is enabled for motion detection (the ‘running man’ icon is blue color), and then make a motion in front of the camera. Within a few moments, you should receive a notification that a motion was detected.
Why are my Blink cameras not working?
If one of your Blink cameras isn’t responding, you may see error messages like “Camera Busy” or “Thumbnail Failed”.Wait two minutes for Internet service to be restored, then try using your camera again. Power cycle your camera. To do this, remove the batteries for 10 seconds and reinsert them.
How far away will a blink camera detect motion?
approximately 20 feet
The maximum motion detection range is approximately 20 feet for all blink cameras. Some factors that influence motion detection are the app sensitivity setting, camera placement, object size, infrared illumination and object temperature.
What does it mean when Blink camera flashes red?
The Blink Outdoor Camera may be sending you signals that something needs to be fixed by flashing different colors. If you see your camera flashing red, that can mean one of two things: either your device is not connected to the internet, or your battery is running low.
Does blink only record when motion is detected?
Blink is a motion based camera system.The Blink XT2 will record when motion is detected or Live View is active. Blink cameras do not offer continuous recording, though you can leave the system armed for any interval of time.
Can blink camera detect motion through glass?
The Blink cameras use A PIR sensor to detect motion. Unfortunately this type of sensor is not able to detect movement through glass.
How do I restart my blink camera?
To reset a Blink camera, reset the Sync Module by holding down the button on the module’s side until its light turns red; this resets the Blink camera system and requires reinstalling the module in the Blink app to use the camera again.
How do I reset my blink outdoor camera?
You can reset the blink camera by pressing and holding the reset button on the sync module. Once the light turns red, you have to delete and reinstall the sync module in the Blink App. , you can find the reset button at the bottom of the camera.
What network does blink use?
2.4 GHz Wi-Fi network
Blink devices use your 2.4 GHz Wi-Fi network to communicate with the main servers. Some routers create a 5 GHz network that may be visible to your phone or tablet, but will not be visible to the Blink system. Important: Blink devices communicate on port 443 HTTP Secure (HTTPS).
How high should I mount my blink camera?
Mounting the Blink Outdoor Camera is easy and only takes a few minutes. However, you’ll want to make sure it’s installed in the best spot for high visibility and clear footage. Generally speaking, the best spot to mount the device is outside of direct sunlight, around 8-10 feet above the ground.
What does it mean when Blink camera flashes green?
A flashing green light on a security camera means there is a local network connection onlyno internet connection.
What does blue light on blink camera mean?
detecting movement
Hello, the blue light flashing indicates that the camera is detecting movement. It will continue to blink blue for as long as movement is being detected.
How do I know if my blink camera is recording?
The Status LED can be set to the following:
- On – Displays a green light on the front of the Mini camera when it is active and ready to use, then shows a blue light while recording.
- Off – Never display the Status LED.
- Recording – Displays a blue light while recording.
Can more than one blink camera record at the same time?
Blink Cameras in Multiple Locations
You can do so by linking two to cameras to the same Blink account. Each camera needs to be connected to a sync module. However, you can only connect cameras that are about 100 feet from the module, a device that is plugged into a power source.
Does blink work with ring?
Blink cameras do not work with Ring. Blink and Ring devices can be used in the same home simultaneously, but they must be set up using separate apps.Through Routines, you can do things such as start recording on your Ring doorbell when your Blink camera detects motion.
Where is the sync module for blink?
The Sync Module has a physical reset button located next to the USB port on the side of the device (pictured below).
The Blink Mini has a reset button on the bottom side of the camera, which may be necessary to use when you add it to a new or existing Blink system.We also recommend inserting either a paperclip or small screwdriver (not safety pins or thumbtacks) to reset the camera.
The reset button is located on the right-hand side of the Sync Module next to the USB port. Please note that this could take between 15-30 seconds. This will cause the Sync Module to reboot into setup mode.
What happens if I unplug Blink Sync module?
When the power goes out or your Wi-Fi drops (often for no good reason), your Blink cameras can become disconnected. Therefore, you may need to reset your Sync Module to reconfigure its network connection.This reset will allow you to reconfigure your device settings and prompt you to put in new Wi-Fi credentials.
Contents