Gate: When shooting on film, you’ll often hear the assistant director shout, “Cut! Check the gate!” This is to ensure that the camera and film is free of any impurities or blockages (a hair in the way, for instance) that would render what’s been filmed unusable or call for another take.
What does checking the gate mean?
And check the gate means to look literally at the gate of the film camera where the film passes in front of the lens to make sure there aren’t any hairs in there because if there’s a hair or dust it would scratch the film.
What does gate mean in film?
From Wikipedia, the free encyclopedia. The film gate is the rectangular opening in the front of a motion picture camera where the film is exposed to light. The film gate can be seen by removing the lens and rotating the shutter out of the way.
What do directors say at the end of filming?
Wrap
Wrap was a phrase used by the director in the early days of the film industry to signal the end of filming. Since the 1920s, filmmakers have been using this phrase when principal photography is concluded and the film is ready to go into post-production.
What does AKS mean camera?
AKS – Abbreviation for accessories. Often labeled on the boxes of camera equipment. Camera Left/Camera Right – The direction of left and right in relation to the direction the camera is facing. Usually opposite the subject’s left and right.
What does closing the gate mean?
It means that they will not admit anybody to the flight who appears at the gate after the time given. The logical “gate” which admits you to the aircraft is closed and you can no longer go through it. This is just a way of saying “make certain you are at the gate 30 minutes before departure time”.
What does full gate mean?
Definition of full gate
: the adjustment of a water turbine to utilize its full capacity working at full gate.
How do you check the gate?
So after you have successfully taken a shot you “check the gate” to confirm the gate was clear from obstruction. This is done by looking into the front of the lens with a flash light. Traditionally the “gate” is the window on the camera body where light from the lens passes through to expose the film.
What does open gate mean?
Definition of open gate
: a slalom obstacle placed at right angles to the vertical descent of a ski slope — compare closed gate.
Why do directors say hold?
When you hear these words, it means to hold your position for a temporary delay and be prepared for rolling. You must be emotionally ready at all times so you can step into your character’s shoes. Standing by or holding means you will pause, stay in character, and be ready to continue when action is called again.
Why is the last shot called Martini?
Martini Shot (also called Window Shot) is a Hollywood term for the final shot set-up of the day as named by Cody Whitehouse (aka Christopher R. Martini). Shot was so named because “the next shot is out of a glass”, referring to a post-wrap drink.
Do directors really say cut?
Yes, “cut” is really said by the director at the end of each take – This lets everyone know the take is finished and resets can begin. “Cut” lets the actors know that they can break character and receive direction from the director.
Do directors tell actors how do you act?
In short, the answer is ‘no’: there is as script, there are discussions and meetings, there is the work that the actor will do on his own, but the most important thing is that there was a choice through a process called “casting”.
Why do directors say print?
(“Print that”) – This is something that the Director says to the Script Supervisor or sometimes to the Cinematographer and/or Assistant Director to let them know she liked the take. Another take may be created (just in case) and so the Director may add, “I’d like to go again” or she may say “I’m ready to move on”.
What does cut mean in film?
In film and video, a cut is defined by when one clip ends and another one begins. For example, say you have a wide shot clip of a horse running as well as a close up clip of a woman’s eyes watching. The “cut” would occur when the first shot ends and is followed by the second shot. That’s just a basic example, though.
What does tails mean in filming?
Tail – The end of a shot or a roll is called the tail. Tail Slate – Sometimes it is necessary to mark a shot at the end rather than at the beginning. When this is done it is called a tail slate.
What is Cinematography used for?
cinematography, the art and technology of motion-picture photography. It involves such techniques as the general composition of a scene; the lighting of the set or location; the choice of cameras, lenses, filters, and film stock; the camera angle and movements; and the integration of any special effects.
What do you say when exchanging a lens between an AC and Cam op?
Grab the new lens and say: “I got it”
“I got it,” is the universal verbal cue that you have a firm grip on the lens and it’s OK for the other person to let go. This phrase may change according to preference, but some kind of verbal cue is necessary.
What is this boarding pass?
A boarding pass is a document that gives a passenger permission to board the plane. It contains information about flight times, boarding times, and seat assignments for that flight.
Is gate the same as terminal?
An airport terminal is a building at an airport where passengers transfer between ground transportation and the facilities that allow them to board and disembark from aircraft . A gate, or gatehouse, is an area of an airport that provides a waiting area for passengers before boarding their flight .
What is hair in the gate?
‘Hair in the gate’ refers to the film gate, the opening at the front of a camera where the film is held in place so it can be exposed to light through the lens.
Contents