Troubleshooting Tips: Try power cycling the camera by unplugging it for about 30 seconds and then plugging it back in.Try plugging the camera into a different power outlet. Attempt a factory reset, and try to set up as a new device. Cam v3: Remove the SD card if there is one inserted.
How do I get my WYZE camera back online?
Reboot your Wyze Base Station to reestablish the connection.
- Unplug the base station from power, wait 5-10 seconds, then plug it back in.
- Once the status light is solid blue, the reboot is complete.
How do I reset my camera WYZE?
With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.
What causes WYZE cam to go offline?
Your camera appearing offline can also lead to contact and motion sensors falling offline if they’re attached to a Bridge plugged into the affected camera. To fix this you will need to power cycle your camera. Unplug the camera from its power source.Allow 5-10 seconds to pass for the camera to completely discharge.
Why does my security camera keep going offline?
Security cameras go offline for three main reasons: power outages, loss of internet, or failure of the camera’s components (broken parts or wires).
How do I fix WYZE offline?
Fix Wifi Issues with our Self-Service app
- Try powercycing your camera by unplugging for about 30 seconds and plugging it back in.
- Reboot your router.
- Try a factory reset, and attempt setup as a new device:
How do I reset my WYZE camera to a new WiFi?
To perform a factory reset on your Wyze Plug:
- Press and hold the on/off button on the side of the Plug until the status light begins to flash blue.
- Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.
Can you use WYZE camera without WiFi?
You must have an internet connection to set up the camera and configure it with the Wyze app. And if you have a microSD card inserted and Local recording to microSD card turned on in your settings, the camera will continuously record to that microSD card, even if offline.
Why is my WYZE camera blinking red?
Flashing Red, Red and Blue, or Blue
Power cycle the camera by unplugging the power and plugging it back in. If the camera returns to flashing red but never reconnects, set the camera up as a new device.
How do I reconnect my Wyze camera after unplugging?
Power cycle your Wyze Cam. Unplug your camera from the power outlet, wait 5-10 seconds, then plug it back into power.
Why is my Wyze camera flashing blue and yellow?
Flashing yellow, yellow and blue, or blue
Power cycle the camera by unplugging the power and plugging it back in. If the camera returns to flashing yellow but never reconnects, set the camera up as a new device. On the Home tab of the Wyze app, tap the + plus sign in the upper left, then select “Add Device”.
Why are my security cameras not working?
Reboot the security camera
Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.
How do I turn on my WYZE camera?
To set up your Wyze Cam or Wyze Cam Pan:
- In the Wyze app, tap Home, then tap + plus sign on the top left.
- Tap Add Device.
- Tap Cameras > Wyze Cam or Wyze Cam Pan.
- With your camera plugged into an outlet, tap Next in the app.
- Pull the base from your camera and single-press SETUP on the bottom of the camera.
How do I connect my WYZE to WiFi?
- Plug in your Wyze Plug into an outlet. The status light on the plug will flash blue, indicating it’s in pairing mode.
- Tap Next.
- Select your network and enter your network password. Tap Next.
- Pairing will complete automatically.
- Enter a name for your Wyze Plug, then tap Finish.
How do I know if my network is 2.4 or 5?
- Connect to the WiFi network.
- Open your networks panel from your taskbar (click the WiFi icon in the bottom right).
- Click on Properties of your WiFi network.
- In the new window that opens, scroll all the way down to Properties.
- Network Band will either say 2.4GHz or 5GHz.
Can WYZE cameras be hacked?
Yes, the Wyze Camera can be hacked and somebody can have access to the live video of your home or office. Keep in mind that the camera is not “unckeable” but there are ways to reduce the problem and increase the camera security.
Is WYZE a Chinese company?
In fact, Wyze is a Chinese company disguised as an American company. Its owner is a Chinese company called Hualai. In addition, Wyze uses a software solution called TUTK, so all Wyze’s data will pass through this company.
How much WIFI does WYZE camera use?
In SD (Standard Resolution) the camera uses 1 to 2MB per minute, and in HD (High Resolution) the camera uses 4 to 7MB per minute. The amount of data the camera uses impacts directly in the SD card size.
Why is the blue light blinking on my WYZE camera?
The blinking blue light indicates that your camera has already acquired the router information, but the network is poor.Reboot your router. 2. Check whether the router your camera connected can work normally.
How do I reboot my WYZE base station?
Reboot your Wyze Base Station to reestablish the connection.
- Unplug the base station from power, wait 5-10 seconds, then plug it back in.
- Once the status light is solid blue, the reboot is complete.
Why does my WYZE camera have 4 red lights?
They are infrared (IR) illuminators. When the camera is in night mode, they help it see.
Contents