Make sure that your Synology NAS and computer are located on the same local area network and subnet. Temporarily disable or remove firewall software on your computer. Try using other Ethernet cables to connect to your Synology NAS to check for defective cables.
Why can’t I see my Synology on the network?
Ensure your Synology NAS and your computer are connected to the same LAN and the same router. Try do temporarily deactivate your Windows built-in firewall, Antivirus software, Internet security software on your computer.
Can’t see NAS drive on network?
[FIXED]: NAS Device Not Visible on Windows 10
- Click the Windows icon (Start Menu) and select Settings.
- On the Windows Settings window, select Network & Internet to open a Status window.
- Click Change Adapter Options.
- Right-click an adapter you use for accessing the NAS device and click Properties.
How do I connect to my Synology NAS?
Overview
- Go to Control Panel > QuickConnect.
- Check the Enable QuickConnect box.
- If you do not have a Synology Account, click Log in to or register a Synology Account.
- Create your own QuickConnect ID in the QuickConnect ID field.
- If you do not see the QuickConnect DSM link, click Advanced and make sure DSM is enabled.
How do I reset my Synology network settings?
Mode 1: Reset administrator login credentials and network settings to default. Locate the RESET button on your Synology NAS. Press and hold down the RESET button for about 4 seconds until you hear a beep. Release the button immediately.
How do I access files from Synology NAS in my local network?
How to access files on Synology NAS within the local network (NFS…
- Enable NFS service on your Synology NAS.
- Assign NFS permission to shared folders.
- Mount shared folders via NFS on the client side.
Can’t connect to Synology NAS Mac?
For Mac
- Go to Finder > Go > Connect to Server.
- Disconnect any unresponsive connections to the Synology NAS from the Finder sidebar, then start from Step 1 to reconnect.
- Use Force Quit to restart Finder, and try to connect to your Synology NAS again.
Where is Synology NAS on Network Mac?
Overview
- Open Finder on your Mac computer.
- Find the menu bar along the top of the screen.
- Click Go and select Connect to Server.
- Enter your DSM username and password.
- Finally, if your user name credentials are correct, you will now see your Synology NAS listed under the Shared section of your Finder window.
What is the IP address of a Synology router?
192.168.1.1
If you still cannot access your Synology Router via router.synology.com from a client device, you can access it using its default IP address “192.168. 1.1“.
What is the IP address of my NAS?
To determine the IP address of your NAS system, you have to look it up in the network settings of your computer. In Windows, go to ‘Control Panel’, click on ‘Network and Sharing Center’, then click on ‘Change Adapter Settings’. Right-click on the network connection icon and click ‘status’.
How do I connect to Synology NAS WIFI?
You can connect Synology NAS device to a wireless network when a wireless dongle is plugged into its USB port. Go to Control Panel > Wireless > Network Map Configuration and choose Join Wireless Network.
How do I access NAS from outside network?
How to Remotely Connect to Your Device
- Step 1: Enable FTP.
- Step 2: Enable WebDAV.
- Step 3: Update User Permissions.
- Step 5: Use Dynamic DNS to Assign a Web Address to Your Home Network.
- Step 6: Set Up Your Remote Connection.
- Step 7: Enter and Save Your Password.
How do I connect my Synology NAS to my wireless router?
How to connect your NAS to Wi-Fi
- Firstly, check your dongle is supported.
- Plug your Wi-Fi dongle into an available USB port.
- If using a supported dongle, head to Control Panel > Wireless > Network Map Configuration.
- Choose Join Wireless Network.
- Follow the on-screen wizard, filling in your LAN password.
How do I connect my Synology NAS to my Mac?
Overview
- Open Finder on your Mac computer.
- Find the menu bar along the top of the screen.
- Click Go and select Connect to Server.
- Enter your DSM username and password.
- Finally, if your user name credentials are correct, you will now see your Synology NAS listed under the Shared section of your Finder window.
How do I reboot my Synology router?
Use a paper clip to gently press and hold the RESET button for 4 seconds. Your Synology Router will then start a soft reset. When the soft reset is complete, launch a web browser on a computer that is being connected to your Synology Router via Ethernet. Enter “router.synology.com” in the address bar.
How do I access Synology QuickConnect?
QuickConnect
- Go to Control Panel > QuickConnect > General.
- Check Enable QuickConnect.
- Enter your existing Synology Account information or register a new account.
- Specify a new QuickConnect ID. Make sure it is easy to remember, so you will be able to access your Synology NAS anytime.
- Click Apply.
How do I access my NAS on my Mac?
The Process for Successfully Connecting NAS to Mac OS X:
- In the OS X top navigation select ‘go’
- Then ‘connect to server’
- When the connect to server window opens, enter the system IP address and NAS share name and push ‘connect’
- You’ll then be prompted to enter a username and password to connect to the server.
Does Synology NAS work with Mac?
Best answer: Yes, you can use a Synology NAS for backing up your Mac with Time Machine. Using a NAS also opens up the door to additional features like file storage, setting up a media server, and much more.
How do I mount a NAS on a Mac?
Map a network drive to Mac OS X
- From the Mac OS X Finder, hit Command+K to bring up the ‘Connect to Server’ window.
- Enter the path to the network drive you want to map, ie:
- Enter your login/password and click OK to mount the network drive.
- The drive will now appear on your desktop and in the Finder window sidebar.
Can’t connect to Synology router?
Restart the modem and Synology Router
Unplug the modem and the Synology Router. Plug in and turn on the modem. Wait approximately two minutes until the LED indicators on the modem are back to normal. Plug in and turn on your Synology Router.
Contents