If you are unable to view your CCTV on your mobile device, the problem will be related to your Internet Router (WiFi) not sending an internet connection to your CCTV Recorder (DVR / NVR). There could be several reasons why this exists, so please identify the app you are using from the list below first.
Why can’t I view my security cameras on my phone?
And here are some common troubleshooting tips if you are unable to view cameras on connected app: Check the security camera connection and power. Make sure the network connection is stable by testing with other network devices. Reboot the security camera to fix issues.
How can I view my security cameras on my phone?
HOW TO CONNECT CCTV TO ANDROID OR IPhone ?
- Step 1: CONNECT DVR TO MONITOR DIRECTLY.
- Step 2: CONFIGURE CCTV DVR SETTINGS.
- Step 3: NOW CONFIGURE WIFI ROUTER FOR DVR.
- Step 4: CONNECT DVR TO WIFI VIA LAN CABLE.
- Step 5: CHECK THE SETTINGS.
- Step 6: NOW CONNECT TO ANDROID PHONE.
What app can I use to view my cameras?
Also developed by CCTV Camera Pros, the Viewtron app for iOS and Android is a camera / DVR viewer app that works with all Viewtron CCTV and HD-SDI hybrid DVRs. The Viewtron app allows users not only to view security cameras live, but also search and playback video that has been recorded to their DVR.
Why can’t I see my CCTV remotely?
What to Do If You Cannot Remotely View Security Cameras Using the Internet via Port Forwarding. Make sure your cameras are connected to the network. Ensure all the ports of the network configuration are mapped to the Internet. Open the firewall in the router to allow Internet access to the camera.
How do I get my security camera back online?
The very first thing to try in order to get your camera back online is to disconnect it from the power source. Unplug the camera and let it sit for a few minutes and after a few minutes have passed, plug the camera back in.
Why won’t my IP camera connect?
Make Sure There Is No Signal Interference. If there is a bad reach, the IP camera can’t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router.
How do I connect my wireless camera to my phone?
How can I connect my Android phone to my camera via Wi-Fi?
- Enable the hotspot function in your Android phone, i.e., you set up a Wi-Fi network on your Android phone.
- Connect the camera to the Android phone’s hotspot-enabled Wi-Fi network.
Can I put all my cameras on one app?
Use a 3rd party mobile app or desktop app.There are 3rd party apps such as tinyCAM Monitor (Free & paid versions) for smartphones and Milestone XProtect Essential (Free version) that will let you add all your IP cameras and view them in one single screen. PROS: Easy to set up.
How can I view my security cameras online?
Security Camera Live Feed via Web Browser
- Find your security camera’s IP address.
- Open a browser of your choice and type in the IP address.
- Enter login information.
- Find the HTTP port number used by the cameras and change the port number.
- Reboot the security camera so you can save the changes.
How do I access security cameras?
How to view your IP camera remotely via a web browser
- Find your camera’s IP address.
- Open a web browser and type the IP address.
- Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
- After you change the port, you will need to reboot the camera in order to save the changes.
How do I connect my camera to the Internet?
Digital Camera WiFi Connection
- Press the Home or Menu button on your camera.
- Open Settings, then WiFi Setup or WiFi Options, if applicable.
- Make sure your camera’s WiFi connection is turned on.
- Your camera may automatically connect to your WiFi network.
- Enter your WiFi network’s password.
What to do when camera is not working?
How to Fix Camera Not Working on Android
- Reboot device.
- Switch off device.
- Recharge device battery if low.
- Clear App Data.
- Check if another app is actively using the camera.
- Check camera app permissions.
- Force Stop the camera app.
- Remove any third-party camera apps.
What does reboot camera mean?
Reboot, restart, power cycle, and soft reset all mean the same thing.In more technical words, to reboot or restart something means to cycle the power state. When you turn the device off, it’s not receiving power. When it’s turned back on, it is getting power.
Why won’t my security camera connect to my WiFi?
If the connection is poor, if possible, reduce the distance between the camera and your Wi-Fi router. Consider a wired installation or consult your internet provider for solutions. If the camera is online you can check the Wi-Fi strength in the app. Go to ‘Options’ in the list view of the camera.
Why is my camera not connecting to WiFi?
Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. On iOS: In the Settings app, tap General > Reset > Reset Network Settings. On Android: In the Settings app, tap General management or System, tap Reset or Reset Options > Reset Network Settings. Confirm the reset.
Why is my WiFi camera offline?
Occasionally, your camera may go offline due to network connectivity.Even if your camera is not too far from your router, there may be different materials (walls, floors, metal, concrete, plaster) that can block the WiFi signal. Minimize the number of physical obstructions between the camera and router.
How do I connect my iPhone camera to live streaming?
How to use your iPhone as a webcam for streaming
- Ensure your iPhone is connected to the same Wi-Fi network as your PC.
- Open EpocCam on your iPhone.
- Touch the screen to activate.
- On your PC, open up your streaming software.
- Add new source to your scene.
- Choose video capture device.
Can I use external camera in phone?
The Android platform supports the use of plug-and-play USB cameras (that is, webcams) using the standard Android Camera2 API and the camera HIDL interface. Webcams generally support USB video class (UVC) drivers and on Linux, the standard Video4Linux (V4L) driver is used to control UVC cameras.
How do I monitor multiple cameras?
The key to monitoring multiple cameras is a WiFi router. As a wireless device, Serv Pro can be connected to other networks, allowing it to send its video to that WiFi router. When your smartphone/tablet is connected to that network, it will automatically pick up the feed as if it was connected to the Serv Pro directly.
How can I see multiple cameras?
On PC browser:
- Step 1: Setup multi-camera function. Login to main camera’s web page. Navigate to Settings–>Basic Settings–>Multi-Camera menu.
- Step 2: View Multiple Cameras on one page. Login to the main camera and click on the multi-camera view option (4 or 9) on the left panel.
Contents