There’s fortunately a quick fix that does not require resetting the fixtures manually. The issue involves C by GE light bulbs set up directly through the Google Home app not responding to commands.Rather, all users need to do is reboot the Google Home/Nest Mini or Hub that paired the lights.
Why are my C by GE lights not responding?
If your Cync devices are not responding to Google voice commands or the Google Home app, here are some common solutions: Confirm your Cync devices are paired with the Cync app. Ensure you haven’t changed your Wi-Fi network credentials and that your Cync/C by GE devices are within range of your Wi-Fi router.
How do I reset my GE lights C?
How to factory reset smart bulbs from C by GE and Cync
- Start with the light switched off for at least five seconds.
- Turn the light on for eight seconds.
- Turn the light off for two seconds.
- Repeat this process five more times.
- Yes, really. On, off. On, off.
- The bulb will flash three times if the reset has been successful.
Why have my smart lights stopped working?
If your smart light bulb isn’t working, or Alexa can’t discover it, reset your device. To reset your smart light bulb: Go to the manufacturer’s companion app or website to follow instructions specific to your device. Reconnect your smart home device to Alexa in the Alexa app.
How do you reset GE lights?
1 Reset Smart Bulb
- Launch the C by GE app on your phone or tablet.
- Tap Settings at the bottom.
- Tap Support.
- Tap Factory Reset.
- Then tap C by GE Lights.
- The C by GE app will show you the number of times you have to turn on and off the smart bulb and the amount of seconds you have to keep the smart bulb turned on or off.
How do I fix my GE lights C?
1 Restart Your C by GE Smart Light
Wait 10 seconds. Turn the power back on, or plug the lamp back in. Wait one minute for the smart light to reconnect to the network. Once restarted, use the C by GE app to attempt to update the light again.
How do you update GE light bulb C?
Here’s how to do it:
- Launch the C by GE app on your mobile device.
- Tap Settings at the bottom.
- Tap Firmware Update.
- You’ll see a list of devices that can be updated. Tap Update to the right of the device(s) and wait for the process to complete.
How do you pair a GE light bulb?
Start with your GE Link bulb turned on. Then turn off the light and wait 3 seconds. Turn on the light and wait 3 seconds. Repeat turning the light off and on (approximately 5 times) until the bulb flashes once.
How do I fix unresponsive Alexa lights?
- Check your home network. If a device Alexa connected to is unresponsive, start by checking your Wi-Fi.
- Confirm the device has power.
- Check the manufacturer’s app.
- Check the Alexa Skill.
- Toggle the Alexa Skill.
- Uninstall and reinstall the device manufacturer’s app.
- Power cycle the device.
- Update the firmware of your device.
What does the C by GE app do?
Activate temperature away from home
By grouping the CYNC Smart Thermostat and Ceiling Fan Smart Switch together in the Cync App, you can get temperature control from anywhereso with one touch, you can save energy while you’re at work or make sure your home is the perfect temperature when you get home.
How long do C by GE bulbs last?
GE estimates it will last around 14 years and cost around $1.14/year, if you only use it three hours a day. Installation is as simple as screwing it into your favorite socket or lamp.
Why are my smart lights offline?
Smart lights are offline due to technological difficulties. These issues commonly include poor wi-fi signal strength, a power outage, or equipment failures. When smart lights will not come back online, do a factory reset. By doing so, it will allow the lights to reboot and reconnect to a device.
How do I connect my GE WiFi C?
- Launch the C by GE app on your phone or tablet.
- Tap Add in the top right corner.
- Then tap Add New Devices.
- Select C-Start Switches.
- Tap Get Started.
- Tap Continue when you see that light.
- Select the smart switch from the list. Select Continue to proceed.
- Select your WiFi network from the list and tap Continue.
How do I fix unresponsive smart light?
Reset Smart Home Devices
- Turn on the bulb for three-to-five seconds and then off for three-to-five seconds. Repeat this multiple times and turn it on again. If reset was successful, the bulb blinks.
- Turn off the bulb.
- Restart Discovery.
- Turn on the bulb.
Why are my hue lights unresponsive Alexa?
Sometimes the Alexa Skill can lose its connection to the Hue, and the easiest way to fix it is to remove and re-add. To do this, go to the Alexa app, tap More, Skills & Games, then tap Search. Enter Hue, and then tap Disable Skill. Then tap Enable To Use to reconnect the Skill, and log back in to your Hue account.
How do I unlink my C from GE to Google home?
Unlink your Cync (C by GE) device(s) from the Home app
- Make sure your bulbs or plugs are powered on.
- Open the Google Home app .
- Tap your Cync (C by GE) device.
- Tap Settings Remove device Remove. When you remove one device, it will remove all your Cync (C by GE) bulbs and plugs.
How do you reset a smart bulb?
Turn the bulb off for 2 seconds, then on for 2 seconds. Repeat three more times. After the fourth cycle, the bulb will flash, indicating that the reset was successful.
Does Alexa work with C by GE?
Alexa will discover your C by GE devices, and now you can start controlling them! You can use the Alexa app to add them to rooms, create routines, and more.
Who bought C by GE?
The C by GE Life and Sleep LEDs, two of GE Lighting’s recent smart bulb offerings. Savant Systems, a Massachusetts-based maker of professionally installed smart home systems, has struck a deal with General Electric to purchase the GE Lighting brand, the companies announced Wednesday.
Contents