Which of the following is not a data link layer technology? HTTP is not a data link layer technology. HTTP (Hypertext transfer protocol) that works on application layer of OSI model that is sent over TCP.
Which are data link layer technology?
The data link layer, or layer 2, is the second layer of the seven-layer OSI model of computer networking. This layer is the protocol layer that transfers data between nodes on a network segment across the physical layer.Examples of data link protocols are Ethernet, Point-to-Point Protocol (PPP), HDLC and ADCCP.
Is Bluetooth is not a data link layer technology?
Both physical and data link layers of OSI model are implemented on Bluetooth Low Energy. The BLE protocol stack has two parts controller and host. In the architecture, the physical and link layer are implemented in the controller part.
Which is a data link layer technology in IoT?
The data link layer is Layer 2 in the Open Systems Interconnection (OSI) architecture model for a set of telecommunication protocols. Data bits are encoded, decoded and organized in the data link layer, before they are transported as frames between two adjacent nodes on the same LAN or WAN.
Is Bluetooth a data link layer technology in IoT?
Some of the popular Standard IoT communication protocols are: Bluetooth : Bluetooth is a PAN (Personal Area Network) or it is a short-range wireless communication network for exchanging data between the connected devices through that network.It provides a data transfer rate of 3 Mbps in a range of 50m to 150m.
What are the 2 Sublayers of data link layer?
The data link layer within 802.11 consists of two sublayers: logical link control (LLC) and media access control (MAC).
Which of the following is not a networking device?
Discussion Forum
Que. | Which of the following is not the Networking Devices? |
---|---|
b. | Linux |
c. | Routers |
d. | Firewalls |
Answer:Linux |
Is UART data link layer?
The Data Link layer for serial communications is typically handled in hardware, i.e. the UART.
What is not considered as an IoT application?
So anything that requires human interaction or control is not considered an element of the IoT So, at the simplest level, we are not including smartphones, tablets, PCs, etc.
Is not a data link layer technology in IoT?
Which of the following is not a data link layer technology? HTTP is not a data link layer technology. HTTP (Hypertext transfer protocol) that works on application layer of OSI model that is sent over TCP. 13.
Which is not included in a link layer packet?
The Data Link layer attaches a trailer to the end of a packet, and does not include a header. The Transport layer header addresses a receiving application by a number called a MAC address.
What is ZigBee technology?
Zigbee is a wireless technology developed as an open global standard to address the unique needs of low-cost, low-power wireless IoT networks. The Zigbee standard operates on the IEEE 802.15.The protocol allows devices to communicate in a variety of network topologies and can have battery life lasting several years.
What are examples of IoT devices?
#2) What are the examples of IoT devices? Answer: There are several top devices in the market. Smart Mobiles, smart refrigerators, smartwatches, smart fire alarms, smart door locks, smart bicycles, medical sensors, fitness trackers, smart security system, etc., are few examples of IoT products.
What is Bluetooth technology?
Bluetooth is a wireless communication technology that can be used for close-range data transmission from one digital device to another. Bluetooth is essentially a one-to-one wireless connection that uses 2.4 GHz-band radio waves.When connecting Bluetooth devices for the first time, registration is required.
What is a Level 3 network?
Layer 3 is the network layer and its protocol is the Internet Protocol or IP.Traditionally, the network device most associated with Layer 3 has been the router, which allows you to connect devices in different IP networks.
Which of the following is not the layer of TCP IP protocol?
These 7 Layers of OSI are the application layer, the presentation layer, the session layer, the transport layer, the network layer, the data-link layer, and the physical layer. The presentation layer is absent in the TCP/IP model while it is present in the OSI model.
What are the five duties of data link layer?
The main functions of data link layer include framing, error detection and correction, acknowledgement, flow control, ensuring well-defined reliable service interface to the network layer, encapsulating packets from network layer to frames, etc.
Which of the following layer is not network support layer?
Discussion Forum
Que. | Which of the following layer is not network support layer? |
---|---|
b. | Network Layers |
c. | Data link Layer |
d. | Physical Layer |
Answer:Transport Layer |
Which of the following is not a function of network layer?
Discussion Forum
Que. | Which one of the following is not a function of network layer? |
---|---|
b. | inter-networking |
c. | congestion control |
d. | all of the above are functions of network layer |
Answer:all of the above are functions of network layer |
Which of the following devices is a network connecting device?
Gateway. Gateway is a network device used to connect two or more dissimilar networks. In networking parlance, networks that use different protocols are dissimilar networks. A gateway usually is a computer with multiple NICs connected to different networks.
Is UART physical layer?
With reference to the OSI model, a UART implements the data link layer (layer 2). The physical layer (layer1) is covered by several driver standards that all utilize the UART data link layer, among the most popular are RS232C, RS485 and RS422.
Contents