The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated “mm”).
Table 3.
| Metric | Closest Inch |
|---|---|
| M6-1.0 | 1/4-28 (Larger) |
| M7-1.0 | 1/4-28 (Smaller) |
| M8-1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
What size is between M6 and M8?
| Size | Clearance Hole | Tapping Drill (fine pitch) |
|---|---|---|
| M6 | 6.5 | 5.25 mm |
| M8 | 9 | 7 mm |
| M10 | 11 | 9.0 or 8.75 mm |
| M12 | 14 | 10.5 mm |
Is M10 or M8 bigger?
| Metric vs. Inch Series Sizes | |
|---|---|
| Metric Size | Closest Inch Series Size |
| M8-1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
What does M6 mean in bolt size?
6mm
M6 threads are 6mm metric screws. The standard metric rack screw is called M6 x 1. The ‘M’ means it’s metric. The ‘6’ is the outside diameter measured in millimeters, and the ‘1’ is the distance between adjacent threads, also in millimeters.
What size is an M8 bolt?
So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.
What are the most common bolt sizes?
American Manufacturers generally use 13mm, 15mm, 18mm, and 19mm bolts. Anything smaller than these is likely an 8mm or 10mm, and bith asian and american companies use them most often.
What size hole do I drill for a M6 bolt?
Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M4 | 3.3 | 4.5 |
| M5 | 4.2 | 5.5 |
| M6 | 5 | 6.6 |
| M8 | 6.8 | 9 |
Does M8 mean 8mm?
M8 is not exactly 8mm but it is sufficient from a non-engineering point of view as long as the thread pitch is correct. Luckily, most commonly available metric bolts have the same pitch. Regarding tolerance for common uses it can also often be ignored.
Is 5/16 The same as M8?
Well, quick answer is no. They are not the same and they are not interchangeable, although they can work under certain circumstances. The most important part is understanding the meaning of M8 and 5/16 to refer to the size of a metric screw or bolt, so then we can see why they aren’t the same thing!
What does M8 mean?
M8 means “Mate.” The abbreviation M8 is an informal term of endearment for a friend. Most often used between men, M8 can also be a term of general acknowledgement. M8 uses the number 8 to replace the letters “ate.” Here are some other terms that make use of this efficiency: D8 (Date)
What spanner size is M8?
13
| Metric | ||
|---|---|---|
| Thread Size | Spanner Size A/F DIN (mm) | Spanner Size A/F ISO (mm) |
| M8 | 13 | 13 |
| M10 | 17 | 16 |
| M12 | 19 | 18 |
How do I know what size bolt I need?
To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.
What size bolt has a 32mm head?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M16 | 2mm | 24mm |
| M18 | 2.5mm | 27mm |
| M20 | 2.5mm | 30mm |
| M22 | 2.5mm | 32mm |
How much weight can a M6 bolt hold?
213 kgf.
With additional consideration for the fatigue strength, and based on the strength class of 12.9 in the table, we select an M6 screw with maximum allowable load of 213 kgf.
What does 8.8 mean on a bolt?
In the case of a 8.8 grade bolt the first figure signifies that the Tensile Strength is at least 800MPa. The second figure signifies that the fastener will begin to yield at 80% of the Ultimate Tensile Strength, i.e. at least 640MPa.
How can you tell if a bolt is metric or standard?
How long is that bolt? Most bolts come in pretty uniform lengths; and this is a good way to determine if the bolt is metric or standard. Measure the bolt length (not including the cap), and see if it’s closer to a fraction of an inch, or a nice and round millimeter length that ends in 5 or 0.
What does M8 1.25 mean?
For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.
Will a M6 bolt fit in a 6mm hole?
Since they are bolt-nut pairs, you may be able to substitute 6mm, but the 1-1/4″ length will still be essential.
What size drill bit do you need for a M8 anchor bolt?
14mm
Answer: Hi, a 14mm drill bit is required for a M8 Rawlbolt.
Is M8 a thread size?
It is a screw whose thread conforms to the ISO metric screw thread profile with a nominal diameter of 8 millimeters. It is a bolt or crew that is 8 mm thick including the threads. Depending on your choice the thread could be course M8 x 1.25 common or fine thread M8 x 1.00.
What’s bigger 5/16 or 8mm?
8mm = 5/16 inch.
Contents