Polyurea grease is popular with many bearing and motor manufacturers. A significant proportion of equipment manufacturers also specify some type of polyurea grease in their electric-powered machinery.
Which grease is best for bearings?
Lithium based greases are very popular as bearing grease due to their water resistance and performance characteristics in both high and low temperatures. Greases comprised of synthetic lubricating fluids perform well in extreme low and high temperature ranges.
What type of grease do you use on an electric motor?
NLGI 2 grade grease
A NLGI 2 grade grease is the most commonly used in electric motor applications. ASTM D 3336 oxidation life. require a grease with an EP additive. Dropping Point: The dropping point gives an indication of the temperature at which the grease will melt or the oil will separate from the thickener.
What type of grease is used to lubricate?
Lithium-based greases are the most commonly used; sodium and lithium-based greases have higher melting point (dropping point) than calcium-based greases but are not resistant to the action of water.
What type of grease is used in sealed bearings?
Sealed and shielded bearings are grease packed from the factory and are sealed for life. The lubrication used in ball and other bearing types is usually a sodium or lithium based grease or oil. Heavy penetration grease will normally increase friction.
Is Lithium Grease good for bearings?
Did you know a spray of WD-40 Specialist White Lithium Grease is a great lithium lubricant for bearings? It reduces friction on bearings and helps keep them protected from rust as well.Because it’s a superior water and heat-resistant, high pressure grease, White Lithium Grease is great for cars and tools as well.
Which grease is best?
Best Greases: Effective Lubrication for a Smooth Performance
- Valvoline SynPower Synthetic Automotive Grease. This grease is composed of a lithium-based complex thickened in oil, along with premium grade additives.
- Lucas Oil 10301 Heavy Duty Grease.
- Maxima 80916 Waterproof Grease.
How do you grease motor bearings?
Electric Motor Bearing Lubrication Procedure
- Ensure the grease gun contains the appropriate lubricant.
- Clean the areas around the relief and fill fittings.
- Remove the grease relief valve or drain plug.
- Grease the bearing with a calculated amount of grease.
- Watch for grease coming out the relief port.
Do all motors need grease?
Electric motors require lubricants with specific characteristics. Use of the wrong grease often leads to early electric motor failures. The grease consistency preferred for electric motors is normally NLGI 2 or 3, with a base oil viscosity of 100-150 cSt @ 40°C.
Are electric motors lubricated?
Most electric motors are lubricated with grease, not oil, which is where the first mistake often occurs.Multipurpose greases are formulated with base oils in the ISO VG 220 to 460 cSt range, far too high for motor bearings at typical operating speeds.
What are the 3 types of lubricants?
There are three different types of lubrication: boundary, mixed and full film. Each type is different, but they all rely on a lubricant and the additives within the oils to protect against wear.
What are the 5 types of lubricants?
Fluid types
- Hydraulic oils.
- Air compressor oils.
- Food Grade lubricants.
- Gas Compressor oils.
- Gear oils.
- Bearing and circulating system oils.
- Refrigerator compressor oils.
- Steam and gas turbine oils.
What is bearing grease?
Lubricating grease for rolling element bearings consists of thickener, oil and selected additives to improve desired properties. The actual lubricant for a rolling bearing is oil, which can be a mineral oil, fully synthetic or a blend of the two.
What grease is used in SKF bearings?
SKF LGWM 2 is a synthetic, mineral oil-based grease that uses the latest complex calcium sulphonate thickener technology. Its main benefits include excellent corrosion protection, superior mechanical stability and high load lubricating capacity.
How do you choose grease?
When selecting a grease, you must consider the application and operating conditions in which the grease will function. For a better understanding of what goes into a good grease, concentrate on its components, including the base oil type, thickener type and base oil viscosity.
What type of lubricant is used on bearing?
A lithium-based grease, whose base oil is mineral oil, is commonly used as a lubricant for rolling bearings, as it is compatible with the working surface of the bearing.
What is CV grease?
CV Grease (Constant Velocity Joint Grease) is a Lithium based No 2 grease with a Molybdenum Disulphide additive package. Granville CV grease is specifically designed for use in most modern constant velocity joints found on trucks, vans and cars. Ideal for CV joints, universal joints and wheel bearings.
What is calcium sulfonate grease?
Calcium sulfonate greases are made by converting a fluid detergent that contains amorphous calcium carbonate to a grease containing calcite particles. Because of the calcite particles’ lubricating properties, performance additives containing sulfur, phosphorous or zinc may not be needed.
What is Castrol LM grease?
Castrol LM is a premium quality grease primarily designed for wheel bearing lubrication. It is outstanding as a general chassis lubricant and is suitable for automotive applications.
What is Type 2 grease?
The most commonly used greases, such as those used in automotive bearings, would use a lubricant that is NLGI grade 2, which has the stiffness of peanut butter. Grades within this range can operate in a higher temperature range and at higher speeds than NLGI grades 000-0.
What color is bearing grease?
Although there is no hard and fast rule, red could be indicative of grease for high temperatures, blue for cold temperatures and green for environment friendliness.
Contents