ecobee Sensor Placement Once you have the sensor paired, you have to find a place to put it. ecobee recommends placing the sensors about 5 feet high for optimal temperature measurement. For optimal motion detection, sensors should be aimed at doorways and seating areas.
Where should I put my ecobee Smart sensor?
Place your room sensor at a height of approx. 5ft / 1.5m on an interior wall, away from direct heat/cool sources (eg. fireplace, air vents, etc.) If the sensor is out of range of your ecobee3 (approx.
Can ecobee sensors be wall mounted?
There are two ways that you can place the sensor: mount it on a wall or place it on a flat surface. If you are placing your room sensor on a wall: Place on a flat surface using the stand provided. Make sure it is facing the room, instead of the wall Place it at a height of approximately 5ft / 1.5m on an interior wall.
How do I locate my ecobee sensor?
To view remote sensors connected to your ecobee thermostats, navigate into a building with thermostats, click a thermostat with paired sensors, and scroll down. You can check on the temperature and occupancy status of your sensors, and if it is a monitoring only, control, or participating sensor.
How many ecobee sensors are needed?
ecobee thermostats can accommodate up to 32 sensors.
What is the range of ecobee sensors?
The remote sensors have a horizontal range of about 120 degrees and a vertical range of about 25-30 degrees. They can detect motion up to 15 feet. The sensor on the main unit has the same 120-degree angle but only a 2-6 foot range.
How do I calibrate my ecobee sensor?
To Configure Temperature Correction
- Press Menu on the main screen.
- Go to Settings.
- Then go to Installation Settings.
- Select Thresholds.
- Then select Temperature Correction.
- Adjust the temperature reading to fit your needs.
Does the ecobee thermostat count as a sensor?
ecobee room sensors are an additional accessory that you can pair with your ecobee smart thermostat which allows the thermostat to know the temperature of different rooms in your house. Not only do the room sensors detect temperature, but they also have motion sensors so it can tell when somebody is in that room.
How long do ecobee sensors stay occupied?
When you leave that room, the sensor will remain occupied for 30 minutes. This means that if you are moving around the house, the thermostat won’t be continually turning on and off. After 30 minutes of no movement, the sensor will become unoccupied. It will stay unoccupied until movement is detected again.
How do ecobee door sensors work?
Ecobee SmartSensors for doors + windows
They work much like other door and window sensors; you align the base sensor with its corresponding magnet, and you can monitor when a door or window is open or closed, as well as when motion is detected.
Can you pair two Ecobees?
Many people ask if it possible to sync two Ecobee thermostats. According to the developers, yes, it is possible to sync multiple Ecobee devices to each other. All Ecobee devices are interconnected and they are compatible with each other.
Can a smart thermostat detect room occupancy?
The room sensors detect the amount of people present.Most smart thermostats only measure the temperature in the room in which they are located. Room Sensors use their built-in temperature sensors to tell ecobee4 which rooms are occupied and which rooms are not.
How accurate is the ecobee humidity sensor?
The humidity sensor in the ecobee is typically very reliable.The ecobee thermostat is accurate within +/- 1.0F according to official documentation.
Does ecobee Smart sensor measure humidity?
The humidity sensor in the Ecobee Smart Thermostat senses the humidity in the house and adjusts the temperature as needed to make sure it feels how you want it to in your home.
How do room temperature sensors work?
The sensor will tell your thermostat what temperature it is in the room where it’s placed. Whenever the sensor is active, your thermostat will use your sensor’s reading to control when your system turns on and off. Your thermostat will ignore its own built-in temperature sensor during those times.
How do smart room sensors work?
The SmartSensor detects movement in an individual room which is communicated to the smart thermostat to allow the programming to be activated in the smart thermostat so temperature may change automatically when presence is detected.
Do I need to calibrate my ecobee thermostat?
The Ecobee thermostat requires calibration to get an exact reading of the room temperature which takes around 20 minutes. Note-Remember not to use AC or heater during your ecobee calibrates.
Do ecobee sensors work with HomeKit?
All current ecobee thermostats are compatible with HomeKit, except for some early ecobee3 thermostats. You can tell whether or not your ecobee3 is HomeKit-enabled by looking for the Apple HomeKit logo on the ecobee3 packaging.
Where is ecobee HomeKit code?
Your Apple HomeKit Code can be found on the back of your ecobee Switch+ wall plate and on the back of the Switch+ installation manual.
Do ecobee Smart sensors work with HomeKit?
It’s a Wi-Fi smart thermostat with remote sensors that detect both presence and temperature in individual rooms, and the latest firmware update to Ecobee3 officially adds HomeKit support to these sensors.
Contents