MANUAL CONTROL BUTTON A manual control button is located on the motor side of the headrail. This button can control the window covering without the remote. This button is also used to program your remote. STANDARD BATTERY PACK The standard power source provided with the LEVOLOR® motorized operating system.
How do you take Levolor cellular shades down?
Grasp the head rail on each end of the shade and twist the front upper edge down to unhook the head rail from the upper brackets. Roll the head rail down and pull the back of the head rail free from the brackets. Remove the screws securing the upper and lower brackets to the wall with a Phillips-head screwdriver.
How do I reset my Sunsetter motor?
Press and hold the “Programming” button on the back of the remote a second time until the awning moves back and forth in short movements. The remote control is now reset and ready for normal use.
Can motorized blinds be used manually?
If you are not satisfied with any default upper, lower, or MY position of your shade, see steps in the following sections of this manual. Motorized shades offer a convenient solution to everyday challenges.Raising and lowering the blinds is manual with cord lift.
How do you reset electric roller blinds?
Alternatively, you can reset the motor this way: Press and hold the ‘Stop’ button on the remote for five seconds, until the motor shunts once. Press and hold the ‘Prog’ button on the reverse of the remote for seven seconds, within 10 seconds of pressing the ‘Stop’ button. The motor will shunt once.
What kind of batteries do Levolor blinds use?
AA alkaline batteries are recommended for use with battery-powered shadings. These will provide approximately one year of operation, depending on usage. Lithium and rechargeable batteries are NOT recommended. Replace the cap.
Can Levolor blinds be fixed?
Full 10-year Warranty
If any part of you custom Levolor breaks or is damaged due to poor workmanship or defect within 10 years of purchase, we’ll repair or replace it free of charge.
How do you fix blinds that won’t go up?
Step 1: Place your hands on either side of your blind and pull it all the way down. Step 2: Gently rock your blind from side to side while slowly lifting it up. Step 3: Pull it down again and lift it to test if it is working properly. Note: You may have to repeat this process a few times to reset the mechanism.
How do you unlock Levolor blinds?
Follow these easy steps to release the window blinds. With either the help of someone or with one hand, grab the bottom rail of the blinds and push the them upward against the headrail at the top of the blinds. With your other hand grab the lift cord and pull it on an angle. The blinds should release.
How do you fix the tension on cordless blinds?
You need to insert the in-spring end of the shade into a bracket while leaving the other end of the blind off the bracket. This will enable you to spin the blind. Now rotate the shade several times while inserting the spring inside the bracket. This spinning or rotating motion will help to re-tension your blind.
Can composite blinds be painted?
Replace all of the hardware and reassemble the blinds. Faux wood blinds add an element of elegance to any room in your house. If you ever decide to change the color of your blinds, you may choose to paint them, saving you the cost of buying new blinds. Painting your blinds will also add personality to the room.
Can aluminum blinds be painted?
Paint is inexpensive and can do wonders for your blinds. Aluminum blinds can be painted to match your decor. Custom painting your aluminum blinds will allow you to pick any color that you like and find the perfect shade for your decor.
Why is my awning remote not working?
Put new batteries in the awning’s remote control; dead batteries might give the impression that the awning isn’t working. Most remote controls are powered by common household batteries that are easily replaced. You might need to unscrew the back of the remote to access the batteries.
Contents