Where Is The Feedback Generated By Sensors In A Mechatronics System Given?

comparator.
Where is the feedback generated by sensors in a mechatronics system given? Explanation: The feedback signal is given to comparator, which compares the desired input signal to the feedback signal to produce an error signal.

Where is the feedback generated by sensors in a?

A Mechatronics system contains feedback. What is the role of the second level in the mechatronics system design?

Q. Where is the feedback generated by sensors in a mechatronics system given?
D. output sensors
Answer» b. comparators

Is mechatronic system contains feedback loop answer?

A Mechatronics system contains feedback.
Explanation: Feedback signals are generated by sensors of mechatronics system, given to comparators to produce the error signal if any.

What is the function of a sensor in a mechatronic system?

Sensors in mechatronics. The vital part of a mechatronics system is the sensing of physical parameters—either discrete or continuous. In Electrical Transducer Nomenclature and Terminology standard, a sensor is defined as “a device which provides a usable output in response to a specified measurand” [1].

Which of the given systems forms the key elements of mechatronics system?

What are the basic Elements of Mechatronics System

  • (i) Sensors and actuators.
  • (ii) Signals and conditioning.
  • (iii) Digital logic systems.
  • (iv) Software and data acquisition systems.
  • (v) Computers and display devices.

What is a feedback sensor?

Feedback sensors are used to detect the actuator’s output so that the control system can correct for external factors. For example, many robots are propelled forward by wheels connected to DC motors.There are several standard kinds of feedback sensor that are used: Encoders.

See also  Does Router Speed Matter If Wired?

Which phase of a mechatronics system consists of hardware designing?

7. Which phase of a mechatronics system consists of hardware designing? Explanation: Hardware design and simulation is a part of Prototyping.

How is the integration of mechatronics system possible?

How is the integration of mechatronics system possible? Explanation: Integration of a mechatronics system is possible through combining hardware and software. Hardware integration means designing the mechatronics system as an overall system and bring together the sensors, actuators and computers into one system.

Where and when was the word mechatronics invented?

The word “mechatronics” was first coined in Japan in the late 1960’s to refer to the synergistic blend of mechanics and electronics. The word has evolved to describe products and systems that include not only mechanics and electronics, but the software in the electronics, and the control algorithms in that software.

When was mechatronics created?

The term “mechatronics” was coined by Tetsuro Mori, the senior engineer of the Japanese company Yaskawa in 1969.

What are the different kinds of sensors used for mechatronics system?

Different Types of Sensors

  • Temperature Sensor.
  • Proximity Sensor.
  • Accelerometer.
  • IR Sensor (Infrared Sensor)
  • Pressure Sensor.
  • Light Sensor.
  • Ultrasonic Sensor.
  • Smoke, Gas and Alcohol Sensor.

What is sensor application?

The sensor is an electronic device that measures physical attributes such as temperature, pressure, distance, speed, torque, acceleration, etc., from equipment, appliances, machines and any other systems.Applications classify sensors, Property sensed, Technology used and Systems where they are deployed.

Why is proximity sensor used?

A proximity sensor is a device that can detect or sense the approach or presence of nearby objects and for this it does not need physical contact. There are different kinds of proximity sensors. Some of them are listed [8]: Inductive: This type of sensor is used to detect nearby metallic objects.

See also  Is Cfl Good For Eyes?

What is mechatronics describe the key elements of the mechatronics system?

Physically, a mechatronic system is composed of four prime components. They are sensors, actuators, controllers and mechanical components. Figure shows a schematic diagram of a mechatronic system integrated with all the above components. System Response .

Which one is key element of mechatronics?

The mechanical element may include static/dynamic characteristics and it interacts with its environment purposefully. The mechanical elements of mechatronics systems require physical power to produce motion, force, heat, etc. Electro-Mechanical: Electromechanical elements refer to sensors and actuators.

What is sensitivity give classification of sensor?

High Sensitivity: Sensitivity indicates how much the output of the device changes with unit change in input (quantity to be measured). For example the voltage of a temperature sensor changes by 1mV for every 1oC change in temperature than the sensitivity of the sensor is said to be 1mV/oC.

What are the two types of feedback system?

There are two types of feedback loops: positive and negative. Positive feedback amplifies system output, resulting in growth or decline. Negative feedback dampers output, stabilizes the system around an equilibrium point.

What is used feedback device?

Feedback devices are devices required in closed loop systems that provide a signal to the drive or motion controller to monitor an operation and verify the correct operation occurs. Feedback devices used in motion control applications are either resolvers or encoders.

What are feedback components in robotics?

A feedback control system consists of five basic components: (1) input, (2) process being controlled, (3) output, (4) sensing elements, and (5) controller and actuating devices.

See also  Is Whirlpool A Good Place To Work?

What is mechatronics design process?

The mechatronic design process consists of three phases: modeling and simulation, prototyping and deployment. All modeling, whether based on first principles (basic equations) or the more detailed physics, should be modular in structure.

Which is the first step in mechatronics system design Mcq?

Conceptual design and mathematical modelling come under modelling and simulation. Explanation: First level of the mechatronics system is the basic control system which integrates electrical signal with mechanical action. An example of this level is the fluid valve.

Contents

This entry was posted in Smart Home by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!