Architrave.
What Is an Architrave? The architrave (sometimes also referred to as jamb casing) is part of the door casing and refers to the decorative trim that sits around the door frame. It is purchased separately to the frame, which is what the wood around the door frame is called.
What do you call the trim around a door?
Casing: Trim used around door and window openings. Exterior casing trims the exterior of windows and doors.
What is the edge of the door called?
Lock stile This is the vertical edge of the door which sits on the opposite side of the door to the hinges, and contains the lock or latch. Panel The panels, which may be timber or glass, are what fill the frame formed by the stiles and rails of a door.
What is the gap between door and frame called?
When two individual windows or a door and window are joined, the seam between the frames of the two units is called the mull, which is short for mullion. In this case, a door jamb has been joined to a window/sidelight jamb.
What is a door jamb and casing?
Door head: The horizontal component found just above the door, with two grooves the door jambs are built to fit into.Jamb casing: Also called an architrave, this is a decorative trim mounted to the wall around the frame. It’s generally separate from the frame itself, meaning it can be removed or replaced easily.
What is a door surround?
An ornamental border encircling the sides and top of a door frame.
What is door trim?
Enhance the visual architecture in any room by adding decorative door trim around a door.In general, a door trim is used to conceal unsightly gaps resulting from the construction process.
What is the gap around a door?
Remember there should be a gap of 2mm (about the width of a nickel) around the sides and top and a gap of 8mm on the bottom. An easy way to check the top and bottom is to sit the door on the floor. The gap at the top should now be 10mm (2mm top+8mm bottom).
What is the difference between door frame and door jamb?
Many people confuse a door jamb and a door frame. A simple way to remember it is that a door jamb is part of a door frame. The flat surface that runs vertically up either side of the door frame is the jamb.
What is a wood jamb?
Door jamb frames consist of two vertical legs, or side jambs, and a horizontal board at the top, called the head jamb. When the door is attached with hinges to the completed jamb frame, the entire assembly is referred to as a prehung door.The same is true when you’re building a custom jamb to fit a door opening.
What are the parts of a door frame?
Door part names
- Door frame. The door frame is the entire framework supporting the door, including the sill, jamb and head.
- Sill. The door sill is the very bottom part of the door frame that rests on the floor.
- Jamb/door jam.
- Head.
- Panel.
- Astragal.
- Fixed panel.
- Door sweep.
What is wood casing?
Wood casings are generally used to trim around doors and windows, as well as for decoration. Available species for our wood casings include Ash, Beech, Brazilian Cherry, Cherry, Hard Maple, Hickory, Knotty Pine, Soft Maple, Poplar, Walnut, Red Oak, Quartersawn Red Oak, White Oak and Quartersawn White Oak.
What is the difference between casing and trim?
Quite simply, it’s a moulding profile which frames (or trims) a door or window.Casing is functional as well as decorative. The main purpose of casing is to surround all doors and windows, covering any space or gap left between the drywall and frame.
What is a door header?
A header is a beam that spans the opening for a doorway, window, skylight, or stairway.Now, the word header refers to a beam-like support in wood-frame construction. The header spans an opening for a window or door, or it is a cut-out in the roof or floor for a skylight, chimney, or staircase.
What is the difference between trim and Moulding?
TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill
What is a split jamb door?
Split-jamb prehung doors work well in situations where the rough frame is wider than a standard opening. They feature jambs that are split in half lengthwise and the trim casing is already attached to each edge of the jamb, so no mitering is necessary.
What is door buck?
A door buck is a jig that holds the door securely on edge and prevents it from moving while you are planing, routing for hinge mortises or lock installation preparation. Buck was an 1800’s term for sawhorse. So a door buck is basically a door sawhorse.
What are the different types of door jambs?
There are actually two types of door jambs, a single rabbet door jamb and a double rabbet door jamb. Rabbets are grooves cut into the edge of a piece of machinable material.
Contents