An ATX power supply provides a number of peripheral power connectors and (in modern systems) two connectors for the motherboard: an 8-pin (or 4+4-pin) auxiliary connector providing additional power to the CPU and a main 24-pin power supply connector, an extension of the original 20-pin version.
What connectors are on a PC power supply?
Common Computer Power Supply Connectors
- 4 Pin Peripheral Power Connector.
- 4 Pin Peripheral to SATA Cable Assembly.
- 4 Pin ATX +12V Power Connector.
- 8 Pin EPS +12V Power Connector.
- 6 Pin PCI Express Power Connector.
- 8 Pin PCI Express Power Connector.
Do all PC power supplies have the same connectors?
That means it needs to have all the required connector types. The first connector to consider is the main connector that powers the motherboard. This connector comes in two types, 20-pin and 24-pin. The latter is increasingly popular, and it’s likely that your power supply will provide both options.
What are PC power cables called?
Universal Power Cord
C13/C14. C13/C14 is also called a Universal Power Cord, being the current standard for TVs and desktop computers.
What is a P2 power connector?
The P2 is a 6-pin connection that uses 4-pins (the other 2 are blank).
What are 4-pin connectors for?
4-pin Fan. The 4-pin Fan power connector is found on motherboards within a computer case. This connector provides power to cooling fans and is typically used on the fan that cools the CPU. This connector uses the same power arrangement as the 3-pin connector, therefore, a 3-pin connector can be used on a 4-pin fan.
Are all 8 pin PSU connectors the same?
Generally, all 8-pin connectors FROM THE SAME PSU will be the same and can be put anywhere.
What is VGA on power supply?
VGA stands for Video Graphics Array. A VGA cable is a device used to transfer video signals. It does this by acting as a link between the computer and the monitor or between the computer and the television screen. The video graphic cable comes in two types, male and female connector.
Are all PC power cables the same?
Many power cords or leads are interchangeable within the same country and within the same family. Those that have specialized requirements tend to have interlocking devices or tabs that prevent similar cords from being used in other places. Don’t worry. If it fits, you’ll be fine.
What are the 3 types of power supply?
There are three subsets of regulated power supplies: linear, switched, and battery-based. Of the three basic regulated power supply designs, linear is the least complicated system, but switched and battery power have their advantages.
What is an ATX cable?
An ATX style connector is a replacement for the older P8 and P9 AT style connector. It is one of the largest connectors inside a computer. It connects a power supply to an ATX style motherboard. As shown in the picture, the 20-pin cable is a multi-color cable and may be labeled as P1. Note.
What are the 3 types of connectors?
Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors.
Why are there different types of power connectors?
Because electrical power sources can range in size from small batteries to large power grids, the electrical power connectors that allow the transmission of electricity vary in form. Depending on the electrical current carried and the purpose of the application, one of several power connector types may be appropriate.
What are the different types of power cords?
Below is a short glossary of some of the different codes you will find:
- S – Service Grade. This means the cord is 600-volt rated.
- SJ – Junior Service. Meaning 300-Volt rated.
- T – Thermoplastic. The wire is coated in PVC.
- P – Parallel.
- O – Oil-Resistant.
- W – Weather-Resistant.
- V – Vacuum Type.
What is P8 and P9 connectors?
Alternatively referred to as the AT style connector, P8 connector, and P9 connector, the P8 and P9 are IBM power connectors. They connect the power supply to the motherboard on AT, Baby AT and LPX motherboards. The picture is an example of this connector.
What is a P4 connector?
The P4 connector is a 12V power supply cable used with motherboards that have an Intel Pentium 4 or later processor. Today, the connector is a standard power connector and is used with both Intel and AMD motherboards.
Are all Molex connectors the same?
There are three typical pin sizes: 1.57 mm (0.062 in), 2.13 mm (0.084 in), and 2.36 mm (0.093 in). The 1.57 mm pin can carry 5 A of current, while the 2.36 mm can carry 8.5 A. Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power.
What power supply has a 4 pin ATX connector?
ATX 4-pin 12V Power Connector Pinout (ATX v2.
Below is the complete pinout table for the standard ATX 4-pin (2×2) 12V power connector as of Version 2.2 of the ATX Specification (PDF). If you’re using this pinout table to test power supply voltages, be aware that the voltages must be within ATX specified tolerances.
How do I connect my 4 pin power connector to my motherboard?
Our power supply units (PSUs) use an 8-pin EPS12v CPU cable that can be split into two 4-pin connectors. If you want to connect our PSU into a 4-pin EPS motherboard port, simply pull the two halves of the connector apart and connect one half into the motherboard port.
Is the 4 pin ATX power connector necessary?
This connector is used to supply additional 12V current to the motherboard. While the system will likely still run without it, higher current demands such as extreme overclocking or large video card current draws may require it.
Are CPU and PCIe connectors the same?
Yes, as they both provide 12 V. Also You can see it on description of those ports, if they have common description of “CPU/PCI-e” then You are sure that there will be no problem. As You can see in above photo those ports are interchangeable and have the same connector outlay.
Contents