Cameras such as the Blink Outdoor use infrared for motion detection. This occurs when the PIR (passive infrared) sensor detects a heat signature change. PIR sensors detect emitted infrared energy from objects (people, animals, and vehicles) in the form of heat.
What can set off the blink camera?
Sometimes, if the camera has a weak connection to your wireless router, it can cause the camera to record false motion clips. Increasing the re-trigger time should resolve this issue. You can also move the camera closer to your wireless router.
Why does my camera detect motion when there is none?
Under Motion Detection, you’ll see a slider for retrigger time.Sometimes, if the camera has a weak connection to your wireless router, it can cause the camera to record false motion clips. Increasing the retrigger time should resolve this issue.
Why does my blink camera keep going off?
There are several causes why Blink cameras go offline. One of the reasons is a power failure, as it is an electric gadget that operates using electricity. When the power goes off definitely, the Blink camera will automatically be offline. Another reason that may make the camera go offline is a defect.
How does Blink record motion?
Blink is a motion based camera system. It records clip up to 60s, then pauses for ten or more seconds, then looks for movement again.The Blink XT2 will record when motion is detected or Live View is active. Blink cameras do not offer continuous recording, though you can leave the system armed for any interval of time.
Does Blink work if WIFI goes out?
Blink cameras can’t operate offline and require a 2.4 GHz Wi-Fi Internet connection.Blink systems minimally require a high speed connection of at least 2 Mbps upload speed. Wi-Fi is also important for Blink cameras that need to connect to a Sync Module on the same Wi-Fi network.
What is Blink illuminator?
The Blink Outdoor cameras use an IR illuminator for night vision. This makes the image black and white. You can turn the IR illuminator off by going to the camera settings. This will make the image color. Changing this to Auto will let the camera determine if it needs to use the IR Illuminator.
What can trigger a motion sensor?
What are some of the top causes of false alarms for motion sensors?
- Flying or crawling insects; spiders like to make homes in corners and anchor their webs to the sensors.
- Pets.
- Curtains or plants blown by air conditioning or heaters.
- Low batteries.
- Ceiling fans.
- Objects moving near motion sensors.
What does it mean when Blink camera flashes red?
The Blink Outdoor Camera may be sending you signals that something needs to be fixed by flashing different colors. If you see your camera flashing red, that can mean one of two things: either your device is not connected to the internet, or your battery is running low.
What triggers PIR?
The first cause of PIR false alarms is low or unstable voltage at the detector. Test to make sure the voltage at each PIR is above 13VDC and stable. The second cause of false alarms is sudden infrared movement / heat changes in view of the detector.
Why does my blink camera go offline for 30 minutes?
If you’ve recently made changes to the Wi-Fi network, such as a new router or change of password, tap the Change Wi-Fi button to reconfigure your Sync Module or Mini camera on the new network. Mini cameras will not display any LEDs when idle and online.
Why is my blink camera flashing green?
This indicates that the camera has a local connection with a local IP address but has no internet connection. Check to make sure your internet is up and running.Lastly, power cycle the camera by unplugging its transformer and plugging it back in the outlet.
Why is my blink camera flashing blue?
The blinking blue light indicates that your camera has already acquired the router information, but the network is poor.Check whether the router your camera connected can work normally.
What is trigger time on Blink?
When you first come home to your Armed Blink system, you can trigger a motion alert by walking past your camera.By default, the system will capture a 5 second clip, wait for the retrigger time of 30 seconds and if motion continues, capture another 5 second clip.
How far will a Blink camera detect motion?
approximately 20 feet
The maximum motion detection range is approximately 20 feet for all blink cameras. Some factors that influence motion detection are the app sensitivity setting, camera placement, object size, infrared illumination and object temperature.
Do Blink cameras have night vision?
It features full HD video, IR night vision, customizable motion-based recording, two-way audio, and live view through the Blink app. You need a cloud subscription to view recorded footage or store video locally on a Sync Module 2 (not required for operation).
Can I view my blink camera away from home?
Yes, The Blink Indoor and Outdoor cameras can be added to your existing Blink System.Systems activated after 4/15/20 will receive motion alerts and be able to enter Live View for free, with the option to access video recordings in the Blink app through a cloud storage subscription.
How many phones can connect to Blink?
Can the Blink app be accessed from more than one device? Yes! You can download our app and log into the same account from as many iOS and Android devices as you’d like, so the entire household can receive alerts or check in at home.
Can Blink cameras be hacked?
Blink cameras, like most wireless technology, are susceptible to hacking. Fortunately, Amazon frequently releases firmware updates to keep your devices safe and secure from unauthorized use.Backed by Amazon, Blink security cameras are often updated with more secure firmware, specifically designed to prevent hacking.
What is filter on Blink camera?
Rather than view every clip from every camera, a filter allows you to see clips from specific cameras or systems. You can also select whether the filter stays in place, or resets. From your Blink home screen, you can access all motion clips in the Clip Roll by tapping the Clip Roll. icon.
Does Blink have infrared?
Blink camera devices have an 850nm infrared LED light to let Blink cameras show you clear video when there is only darkness. The infrared (IR) LED can be controlled from the Camera Settings page.
Contents