| Thread Size – Imperial | – |
|---|---|
| Thread Size – Metric | M25 |
| Cable Diameter Min | 13mm |
| Cable Diameter Max | 18mm |
| Cable Gland Material | Nylon 6 (Polyamide 6) |
What size is M20 cable?
M20 Waterproof Cable Gland
M20x1. 5 cable gland means the metric type thread with the dimension of the hole size is 20mm, which is around 0.787 inches size, it is designed in IP68 waterproof protection degree to ensure the cable pass-through without exposing the equipment to any damaging stuffs.
How big is an M4 hole?
Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M3.5 | 2.9 | 3.9 |
| M4 | 3.3 | 4.5 |
| M5 | 4.2 | 5.5 |
| M6 | 5 | 6.6 |
What diameter is M6?
Thread Geometry – Metric Coarse
| Thread | Major Diameter | Pitch Diameter |
|---|---|---|
| M4 | 4.0 | 3.545 |
| M4.5 | 4.5 | 4.013 |
| M5 | 5.0 | 4.480 |
| M6 | 6.0 | 5.350 |
What size is M24 thread?
ISO Metric Machine Screw Thread Dimensions
| Thread Size | Nominal Diameter (mm) | Effective Diameter (mm) |
|---|---|---|
| M18 | 18.0 | 16.376 |
| M20 | 20.0 | 18.376 |
| M22 | 22.0 | 20.376 |
| M24 | 24.0 | 22.051 |
What is gland size?
Cable Glands PG Size Conversion Table
| Nominal thread size | Outer diameter | Cable diameter |
|---|---|---|
| PG13.5 | 20.4mm / 0.803in | 6 – 12mm / 0.236 – 0.472in |
| PG16 | 22.5mm / 0.886in | 10 – 14mm / 0.394 – 0.551in |
| PG21 | 28.3mm / 1.114in | 13 – 18mm / 0.512 – 0.709in |
| PG29 | 37.0mm / 1.457in | 18 – 25mm / 0.709 – 0.984in |
What is PG in cable gland?
The PG stands for Panzer-Gewinde . This is a German type thread. The Main difference on this vs NPT and Metric is that the depth of the thread is smaller but has a larger flank angle, which makes it have a wider pitch along with a straight thread. PG Thread. PG Gland Sizes.
What size hole is M8?
Metric clearance and tapping drill hole sizes.
| Size | Clearance Hole mm | Tapping Drill (fine pitch) |
|---|---|---|
| M5 | 5.5 | |
| M6 | 6.5 | 5.25 mm |
| M8 | 9 | 7 mm |
| M10 | 11 | 9.0 or 8.75 mm |
What diameter is M7?
The threads of an M14-2.0 screw, which is coarse, are spaced 0.079 inches (2.0 mm).
Table 3.
| Metric | Closest Inch |
|---|---|
| M6-1.0 | 1/4-28 (Larger) |
| M7-1.0 | 1/4-28 (Smaller) |
| M8-1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
What size is a M5 bolt?
An M5 metric bolt is a bolt with 5mm thread diameter and a 0.5–0.8mm thread pitch (where metric thread pitch specifies the peak-to-peak width of a single thread groove).
Is M6 and #6 the same?
M6 threads are 6mm metric screws. The standard metric rack screw is called M6 x 1. The ‘M’ means it’s metric. The ‘6’ is the outside diameter measured in millimeters, and the ‘1’ is the distance between adjacent threads, also in millimeters.
What size is M7 bolt?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M7 | 1.0mm | 11mm |
| M8 | 1.25mm | 13mm |
| M10 | 1.5mm | 17mm |
| M12 | 1.75mm | 19mm |
What does M6 mean on a bolt?
M6 Threads
M6 refers to a metric 6 mm screw. The outside diameter of the threads is 6 mm. The standard metric rack screw is actually an M6 x 0.1 mm.
What size is M25 thread?
Metric External Thread Chart
| Thread Designation x Pitch | Tolerance Class | Major Dia. |
|---|---|---|
| M24 x 2 | 6g | 23.962 |
| M24 x 3 | 6g | 23.952 |
| M25 x 1.5 | 6g | 24.968 |
| M27 x 2 | 6g | 26.962 |
Is M4 the same as 4mm?
At the threaded bit, an M4 would be 4mm across.
What is M48 thread?
| Common Thread Name | Technical Specification |
|---|---|
| Maksutov Thread | M44.5×1.0 |
| Wide ‘T Thread’ or ’48mm T Thread’ | M48x0.75 |
| 2″ Filter Thread or M48 Thread | M48x0.75 |
| 2″ (Small) SCT Thread | 2″-24 |
How do I know what size my glands are?
Cable gland size is equal to the size of the cable bundle diameter. For example, if your cable bundle diameter is 50mm means then you should select the 50MM cable gland only.
How do you calculate cable size?
To calculate the Cable Sizing one needs to divide the voltage running through the cable by the target current. For instance, If your wire has a voltage current of 150 Volts and your target is 30 then you divide 150/30. This gives you your target resistance of 5 which is required.
What is cable size?
Cross sectional area of the conductor – sometimes called ‘cable size’ Given as mm², it describes the total cross-sectional area of the copper conductor. Cable will be sized 1 mm², 2 mm², 4 mm² etc. and may be written as 1 mm, 2mm, 4mm. This is not the diameter of the cable.
What are PG thread sizes?
Thread dimensions for Pg threads (according to EN 40430)
| Thread | Ø d1 | Ø p |
|---|---|---|
| Pg 9 | 13.86 mm | 1.41 mm |
| Pg 11 | 17.26 mm | 1.41 mm |
| Pg 13.5 | 19.06 mm | 1.41 mm |
| Pg16 | 21.16 mm | 1.41 mm |
Is PG thread tapered?
The PG stands for Panzer-Gewinde . This is a German type thread.These will have a 1/16 taper to the threads. This allows the flanks of the threads to seal together when torqued.