Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M7 | 1.0mm | 11mm |
| M8 | 1.25mm | 13mm |
| M10 | 1.5mm | 17mm |
| M12 | 1.75mm | 19mm |
What does M7 mean in bolts?
List of common metric bolt sizes.
| Metric Coarse | Metric Fine |
|---|---|
| M7-1.0 | |
| M8-1.25 | M8-1.0 |
| M10-1.5 | M10-1.25 |
| M12-1.75 | M12-1.5 |
Is there such a thing as an M7 bolt?
M7-1.0 x 40 mm Class 8.8 Zinc Plated Hex Bolt.
What is M7 thread size?
Table 3.
| Metric | Closest Inch |
|---|---|
| M7-1.0 | 1/4-28 (Smaller) |
| M8-1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
Is M10 the same as 10mm?
If the size is M10 x 25, that would mean that the diameter is 10 mm. Since there is no thread pitch listed, the fastener is assumed to have a coarse thread. The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.
What size is M10 nut?
M10 Hexagon Nuts (DIN 934) – Stainless Steel (A2) Technical Specification
| Finish | Natural |
|---|---|
| Nut Width A/F (J) | 17mm |
| Nut Width A/P (P) | 19.55mm |
| Thread Pitch | 1.5mm |
| Thread Size | M10 (10mm) |
What size is M7 lag bolt?
M7 X 50mm
Specifications for this item
| Brand Name | ASPEN FASTENERS |
|---|---|
| Measurement System | Metric |
| Model Number | ME445-7X50-000300 |
| Part Number | ME445-7X50-000300 |
| Size | M7 X 50mm |
What size is M7 in mm?
Hole size for general Metric threads
| Nominal size | Pitch | Percentage of thread engagement hole diameter (mm) |
|---|---|---|
| M7 | 0.75 | 6.35 |
| 0.5 | 6.57 | |
| M8 | 1.25 | 6.92 |
| 1 | 7.13 |
Are M10 and 3/8 the same?
As George says the CG-5 does use the metric 10 x 1.5. That said, they are very close, the 3/8″ bolt is about 0.019″ smaller and the pitch’s are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..
What size socket fits an M10 bolt?
FLAT HEAD SOCKET CAP SCREW – METRIC
| Size | Head Diameter | Hexagon Socket Size |
|---|---|---|
| M6-1.0 | 13.44 | 4.00 |
| M8-1.25 | 17.92 | 5.00 |
| M10-1.50 | 22.40 | 6.00 |
| M12-1.75 | 26.88 | 8.00 |
What thread pitch is M10?
1.5
Basic Metric Thread Chart (M1 – M100)
| Diameter | Coarse Pitch | Fine Thread Pitches |
|---|---|---|
| M9 | 1.25 | |
| M10 | 1.5 | 0.75 |
| M11 | 1.5 | |
| M12 | 1.75 | 1 |
What size is M18 bolt?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M16 | 2mm | 24mm |
| M18 | 2.5mm | 27mm |
| M20 | 2.5mm | 30mm |
| M22 | 2.5mm | 32mm |
How do I know what size nut to buy?
If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut. If the nut is US standard, count the smallest lines on the tape measure in sixteenths. Add the sixteenths together to find the size.
What size is M10 in inches?
| Tap size | Basic major dia (mm) | Basic major dia (inch) |
|---|---|---|
| M8 x 1 | 8mm | .3150 |
| M10 x 1.5 | 10mm | .3937 |
| M10 x 1.25 | 10mm | .3937 |
| M12 x 1.75 | 12mm | .4724 |
Is 7/16 the same as 11mm?
11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch) 13mm = just over 1/2 inch.
What is 11mm in standard?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
| 7/16″ | 16mm | 5/8″ |
What size is between 10mm and 11mm?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
| 12mm | Just short of 1/2 Inch | 0.47244 Inches |
| 13mm | Little over 1/2 Inch | 0.51181 Inches |
How big is a M6 nut?
M6 Hexagon Nuts (DIN 934) – Stainless Steel (A2) Technical Specification
| Finish | Natural |
|---|---|
| Nut Width A/F (J) | 10mm |
| Nut Width A/P (P) | 11.5mm |
| Thread Pitch | 1mm |
| Thread Size | M6 (6mm) |
What is M6 nut size?
The two threads most commonly found in plant and machinery are commonly known as ‘standard’ and ‘fine’ pitch. The pitch of a thread is the distance between two adjacent threads and is measured in millimetres.
Spanner and Allen Key Sizes.
| Size | Spanner | Allen Key |
|---|---|---|
| M5 | 8 mm | 4 mm |
| M6 | 10 mm | 5 mm |
| M8 | 13 mm | 6 mm |
| M10 | 17 mm | 8 mm |
How do I know what size nut and bolt to get?
A typical rule of thumb . . . Use a bolt diameter that is 1.5 – 2.5 times (up to three times) the thickness of the thinner material you are bolting together. So, for 1/8″ material, a 1/4″ diameter is often a good bolt choice. For 1/4″ thick material, perhaps a 3/8″ or 1/2″ bolt.
What size lag screw has 7/16 head?
Lag Screws: Dimensions and Specifications
| Hex Lag Screws: Dimensions (ASME B18.2.1-1996) | ||
|---|---|---|
| 1/4 | .2500 | 11/64 |
| 5/16 | .3125 | 7/32 |
| 3/8 | .3750 | 1/4 |
| 7/16 | .4375 | 19/64 |
Contents