RAWLPLUG RAWLBOLTS M10 X 115MM 5 PACK 16mm drill required.
What size drill bit do I need for an M10 bolt?
12mm
M10, M12, M14, M16 Concrete Anchor Screw, Hex Head, Zinc. BULK DISCOUNTS
| Bolt/ Hole Size (shank diameter) | Total Diameter (including Thread) | Masonry Drill Bit Size |
|---|---|---|
| M8 | 10mm | 8mm |
| M10 | 12mm | 10mm |
| M12 | 14mm | 12mm |
| M16 | 18mm | 16mm |
What size drill bit do I need for a 10mm Rawl plug?
12mm
As roger said, if the screw is 10mm then the drill should be 12mm, just seen your reply too, if it’s a grey plug then it’s a 12mm drill you need.
What size hole is M10?
Metric clearance and tapping drill hole sizes.
| Size | Clearance Hole mm | Tapping Drill (std Pitch) |
|---|---|---|
| M10 | 11 | 8.5 mm |
| M12 | 14 | 10.25 mm |
| M16 | 18 | 14 mm |
| M20 | 22 | 17.5 mm |
Is M10 a 10mm?
If the size is M10 x 25, that would mean that the diameter is 10 mm.The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.
How do I know what size drill bit to use?
How to Choose Drill Bits by Size
- Use a bit 1/64” smaller than the target hole size for softwoods.
- Use a bit exactly the same size as the hole when working on other materials.
- If you’re not sure which to select, choose a drill bit 1/64” larger than the hole you wish to create.
Do you use same size drill bit as wall plug?
The drill bit diameter is the same as the wall plug diameter. This is usually indicated on the wall plug, for example S6 for a wall plug and drill bit diameter of 6 mm.
What drill bit is 8mm?
Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 6mm x 1.0 | 5.2mm | – |
| 7mm x 1.0 | 6.1mm | 15/64″ |
| 8mm x 1.25 | 6.9mm | 17/64″ |
| 8mm x 1.0 | 7.1mm | – |
What size drill bit do I need for a M12 Rawl bolt?
20mm drill bit
Answer: Hi, a 20mm drill bit is required to install the M12 Rawlbolt.
What size is #16 drill bit?
Drill Bit Size Chart
| Size | Decimal Equivalent | Size |
|---|---|---|
| 69 | 0.0292 | 11/64″ |
| .75 mm | 0.0295 | 17 |
| 68 | 0.031 | 4.40 mm |
| 1/32″ | 0.0312 | 16 |
What size is #2 drill bit?
Downloadable versions:
| Drill size | Diameter (in) | Diameter (mm) |
|---|---|---|
| 2 mm | 0.0787 | 2.0000 |
| #46 | 0.0810 | 2.0574 |
| #45 | 0.0820 | 2.0828 |
| 2.1 mm | 0.0827 | 2.1000 |
What size is an M10 bolt?
10.00
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS |
|---|---|---|
| m10 | 10.00 | 6.63 |
| m12 | 12.00 | 7.76 |
| m14 | 14.00 | 9.09 |
| m16 | 16.00 | 10.32 |
What size is M10 in MM?
17 mm
The pitch of a thread is the distance between two adjacent threads and is measured in millimetres.
Spanner and Allen Key Sizes.
| Size | Spanner | Allen Key |
|---|---|---|
| M10 | 17 mm | 8 mm |
| M12 | 19 mm | 10 mm |
| M16 | 24 mm | 14 mm |
| M20 | 30 mm | 17 mm |
What size is M10 bolt in inches?
Table 3.
| Metric | Closest Inch |
|---|---|
| M8-1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
What size masonry drill bit to use?
Drill bit sizes range from 3mm to 16mm. When it comes to length, there are standard lengths, but there also long masonry drill bits that range from 300 to 400 mm. The size and length of the drill bit you choose depend on the length or the size of the holes you want to make.
What can I use instead of a 5/16 drill bit?
5/16 converts to 10/32. Assuming your bit set is that granular, the next larger size is 11/32, and the next smallest size is 9/32. Those aren’t necessarily common sizes, however. The next size up in x/16 would be 6/16, which is 3/8.
What is a masonry drill bit look like?
Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.
How do I choose a drill bit for a wall plug?
For a concrete wall and a plastic plug, choose a bit that is slightly smaller than the plug. This should allow to be driven in with a light tap of a hammer and is called an interference fit. If it is a concrete wall and a steel anchor, then you have to drill the wall almost exactly.
What size are GREY Rawl plugs?
10 x 36mm
Rawlplug size: 10 x 36mm. Drill bit size: 10mm. Screw size: 5mm to 8mm.
What size are yellow Rawl plugs?
Yellow Wall Plugs
| Plug Diameter (mm) | 5mm |
|---|---|
| Plug Length (mm) | 25mm |
| Screw Diameter (mm) | 3/3.5mm (No. 4/6) |
| Drill Diameter | 5mm |
| Applications |
Is 3/8 drill bit the same as 10mm?
3/8″ bits have a nominal size being just ever so slightly under 10mm. You can’t drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.