What Size Bearing Spacers Do I Need?

Bearing spacer size is measured by two things: axle diameter (not to be confused with axle width!) and overall spacer width. For example, 8mm x 10mm is a very common bearing spacer size. The first number (8mm) refers to the diameter of the axle, and the second number (10mm) refers to the overall width of the bearing.

Do you need spacers between bearings?

Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard.

What size are skateboard bearing spacers?

Sushi Alloy Skateboard Bearing Spacers – 10mm – 4 Pack.

Do bearing spacers slow you down?

This will slow your bearings down and wear them out super fast! Skaters without bearing spacers might find it easier to just run their axle nuts a bit loose to keep the wheels spinning freely. This is even worse! A wheel that is loose on the axle will give a noisy, chattery ride.

Are ABEC 9 bearings good?

ABEC 9 and higher bearings would be ridiculous to use in a skateboard unless you are doing downhill luge-style skating or something else where your goal is to go insanely fast. If you aren’t spending a fortune on these bearings, then don’t trust that they are, in fact, ABEC 9.

Are ABEC 11 bearings real?

ABEC from a precision standpoint refers to the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Association (ABMA). ABEC precision levels do indeed stop at level 9 (there is no ABEC 11 precision level).

See also  Can An Earthquake Damage A Pc?

Are all bearing spacers the same size?

Determining the overall spacer width you need is not an exact science, but generally large longboard wheels will take 10mm, and skateboard wheels will take 8mm. When you purchase new bearings, the set may come standard with bearing spacers, but they can also be purchased separately.

Do I need spacers for my bearings roller skates?

Why Use Spacers in Roller Skate Wheels? Any Wheel with Bearings, when properly installed on Skate Axles, should use Spacers. Years ago, when we used Jam Nuts instead of the Nylon inserted Lock Nuts used today. A Jam Nut must be locked down to keep from loosening and coming off.

Do Bones bearings come with spacers?

Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible. Includes a set of 8 Bones Reds Bearings, 8 Speed Washers, and 4 Bearing Spacers. Instructions and Sticker are included in the box of Bones Reds Bearings.

What bearings do pro skaters use?

Best Overall: BONES SWISS
The reason for that is that Bones have been making skateboard bearings since 1981 and are the leader in the industry as well as the brand that is trusted by skaters the world over. Bones Swiss bearings are engineered to be fast and durable.

How do I choose a bearing?

Summary: How to Choose a Bearing

  1. Find the Bearing Load & Load Capacity. First, know the type and amount of bearing load that your application will place on the bearing.
  2. Know the Rotational Speed of Your Application.
  3. Factor in Bearing Runout & Rigidity.
  4. Find the Right Lubrication for Your Bearings Needs.
See also  What Is A Good Brightness For A Monitor?

Do street skaters use bearing spacers?

Most longboard companies neglect to include this important part when selling boards. Most street-skaters do not use them because they are not familiar. Bearing spacers have many benefits, and negligible downsides. It is a worthwhile quality of life increase if used properly.

Is ABEC 7 or 9 better?

ABEC includes five tolerances classes: 1, 3, 5, 7, and 9 with 1 being the widest and 9 the tightest. Thus, bearings with a higher ABEC rating have tighter tolerances, and that means better precision, higher efficiency, and the potential to accommodate applications requiring high speeds.

What ABEC are Bronson G2?

The Bronson G2 Bearing is a bearing design specifically for skateboarding by Bronson Speed Co. It’s the “2nd Generation” of skate bearings that Bronson have produced.
Bronson G2 Bearings.

Bearing Bronson G2 Bearings
ABEC Rating N/A
Shield Material Rubber Labyrinth (RU)
Number of Shields 2
Includes Spacers Yes

Which riser pads should I get?

Skateboard Bolts & Riser Guide

Wheel Size Riser Pad Size Hardware Size
49 – 54 mm No Riser 7/8″ or 1″ Hardware
55 – 57 mm 1/8″ Riser Pad 1″ or 1 1/8″ Hardware
58 – 64 mm 1/8” – 1/4” Riser Pad 1 1/4″ Hardware
65 – 67 mm 1/4” – 1/2” Riser Pad 1 1/4″ or 1 1/2″ Hardware

What ABEC rating are Bones Reds?

They dont have abec rating. Abec rating is supposed to reflect how fine the bearings were manufactured, not how much the bearings can withstand when skating. Bones reds are claiming their bearings were made for skating purposes, dont need an abec rating and meanwhile have a smooth and fast spin.

See also  What Material Should A Computer Never Be Placed On?

What size are ABEC 9 bearings?

Rating: ABEC 9. Industry standard size: 608 with a 8mm core, 22mm outer diameter, and 7mm width. Pre-lubricated for a smooth, fast ride.

What’s the difference between ABEC 5 and 7?

ABEC 5 bearings allow for lesser friction while ABEC 7 bearings almost give the skater a ‘frictionless’ cruise. ABEC 7 bearings are manufactured with stricter tolerance and are more precise than ABEC 5 bearings.

Are ABEC 11 wheels Good?

Their wheels are perfect for those who love downhill racing. The larger the wheel size, the faster you’ll go. Abec11 wheels are quiet, and feature incredible control and traction. They come in blazing neon colors you can mix and match with other parts of your skateboard.

How high does the ABEC scale go?

The ABEC rating system includes grades 1,3,5,7, and 9. The higher the ABEC rating, the tighter the tolerances are, making the bearing a more precision part. High precision and small tolerances are required for bearings to function at very high RPM, in products like high speed routers that must spin at 20 to 30,000 RPM.

What wheels are good for street skating?

For most street skating, wheels with a durometer rating of 99a and up are preferred. Harder skate wheels are more responsive, slide easier, and hold speed better on smooth surfaces. They absorb less energy than their softer counterpart, making it preferential for popping and flipping tricks.

Contents

This entry was posted in Monitor Mounts by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!