What Should You Do Before Fixing An Electrical Appliance?

Electrical Safety Precautions: Before beginning any appliance or consumer electronic repair, make sure you turn off the power and completely unplug the appliance or electronic. If in servicing your appliance a voltage test is required, reconnect the power supply only for the duration of the voltage test.

What must you do before making any repairs to an electrical system?

4 steps for proper electrical maintenance

• Remember the golden rule: Safety first. You should never start any home maintenance or repair work without proper preparation and safety tools.
• Use electronics accordingly.
• Be mindful of plugs, outlets and wires.
• Schedule routine professional check ups.

What safety rules must be followed when using electrical appliances?

Basic safety precautions

1. avoid overloading sockets by providing enough socket-outlets.
2. where possible switch off all appliances at the mains at the end of the working day.
3. switch off and unplug equipment before you clean it or make adjustments.

What is the first things to do when working with electricity?

Safety Precautions When Working With Electricity

• 1- Make Sure Your Body Is Dry. Often we have seen people touching electrical cables and charges with wet hands.
• 2- Never Use Broken Equipment.
• 3- Always Turn Off The Mains First.
• 4- Use Rubber Gloves.
• 5- Don’t Use Steel Ladders.

What are the health and safety reminders before repairing domestic appliances?

Top 5 Appliance Safety Tips

• Make sure appliances installed in damp locations are plugged into a GFCI outlet.
• Keep all cords, outlets, and electronics away from water.
• Only use extension cords as a temporary solution.
• Always read the operating manual for any appliance you buy.
• Unplug small appliances when not in use.

How do you maintain the electrical wires and electronic circuits in your appliances and components?

10 Electrical Safety Tips for Your Home

1. Check that you’re using the correct wattage in all your fixtures and appliances.
2. Watch out for overloaded outlets to protect your home.
3. Replace or repair damaged electrical cords to keep your home safe.
4. Keep your used and unused cords tidy and secure to prevent damage.

What are 5 electrical safety tips?

Play it safe: 16 electricity safety tips

• Repair Damaged Cords. Inspect your electrical cords regularly for any damage or fraying.
• Replace Damaged Plugs.
• Don’t Overload Power Points.
• Turn It Off.
• Dust Your Appliances.
• Give Your Appliances Space.
• Avoid Using Electrical Items In Wet Areas.
• Understand Your Switchboard.

What are 10 safety rules?

10 Safety Rules Your Child Should Learn

1. Rule #1: Know Your Name, Number, & Address.
2. Rule #2 Talking to Strangers is a Big No.
3. Rule #3 Good Touch & Bad Touch.
4. Rule #4 Never Climb a Wall or a Fence.
5. Rule #5 Playing with Fire & Sharp Objects Not Allowed.
6. Rule #6 Your Child Should be Aware of the School Emergency Procedures.

What are the safety precautions when doing electrical repair at home?

10 Electrical Safety Tips Every Home Owner Should Know

1. Always Cut the Power.
2. Have the Appropriate Fire Extinguisher on Hand.
3. Use More Than One Outlet.
4. Feel Your Outlets.
5. Child-Proof Your Outlets.
6. Investigate Flickering Lights.
7. Install Arc-Fault Circuit-Interrupters.
8. Don’t Use Extension Cords Long-Term.

What safety precaution should be observed when repairing electrical gadgets and home problem?

Never touch or try repairing any electrical equipment or circuits with wet hands. It increases the conductivity of electric current. 2. Never use equipment with frayed cords, damaged insulation or broken plugs.

What should be done first before cleaning any electrical device?

Remember to observe all safe work practices and lockout/tag out procedures prior to cleaning.
Personnel should be properly qualified before cleaning electrical equipment.

1. Rags and Brushes.
2. Liquid Solvents and Water.
3. Vacuum Cleaning.
4. Sweeping and Moping.

How do you solder broken wires?

First, slide a piece of thin gauge heat shrink tubing over the wires. Next, splice the wires together and tin the wire with a small amount of solder. Finally, cover the solder joint with the heat-shrink tubing and heat the area with a heat gun or blow dryer.

What are the 15 safety precautions when working with electricity?

15 Safety Precautions When Working With Electricity

• Avoid water at all times when working with electricity.
• Never use equipment with frayed cords, damaged insulation or broken plugs.
• If you are working on any receptacle at your home then always turn off the mains.
• Always use insulated tools while working.

What are 5 basic safety rules?

General Precautions

• Your safety is your personal responsibility.
• Always follow the correct procedures.
• Never take shortcuts.
• Take responsibility and clean up if you made a mess.
• Clean and organize your workspace.
• Ensure a clear and easy route to emergency exits and equipment.
• Be alert and awake on the job.

What are the 7 safety tips?

Seven Basic General Industry Safety Rules

• Keep work areas clean.
• Use the proper tool for the job.
• Always wear the proper PPE for the work task.
• Never work on live equipment.
• Make sure chemicals are properly labeled and stored.
• Communicate hazards to other personnel.
• Stop work when needed to address hazards.

How do you prepare a safety policy?

Your policy should cover three areas.

1. Part 1: Statement of intent. State your general policy on health and safety at work, including your commitment to managing health and safety and your aims.
2. Part 2: Responsibilities for health and safety.
3. Part 3: Arrangements for health and safety.