While mounting you should stain the specimen well. Avoid the overstraining or under staining of the sample. Avoid the folding of peels. You should use a clean and dry glass slide and coverslip.
What precautions should be taken during mount the components on PCB?
PCB relays common precautions
- Mounting. The PCB should have the hole sizes and spacings as stated in the Finder data sheet to avoid stress being applied to the pins on insertion.
- Cropping. Cropping of relay pins before or after soldering is not recommended.
- Flux Application.
- Cleaning.
- Venting.
What precautions must be taken while putting coverslip on the specimen?
1) You should stain the specimen well. 2) You should be very careful while putting the coverslip to avoid any bubble in the slide. 3) Do not apply too much of pressure on the cover slip. It may break.
What is mounting in biological techniques?
Mounting: ADVERTISEMENTS: Adequately thin and properly stained section of the biological material is required to mounted to glass slides for investigation under the microscope. A drop of mounting medium is put on sections and gently cover slip is lowered on the sample with the help of tweezers.
What is mounting in microscope?
A mounting medium is used to adhere the coverslip to the slide and to preserve the marked sample during handling and storage. Aqueous mounting media are available, they allow to mount the coverslip directly after the staining step.
What kind of precautions need to taken while preparing PCB?
Follow these simple precautions when replacing a Printed Circuit Board: 1. Keep the PC boards in the anti-static packaging until they are ready to be installed. 2. Be sure your hands are clean.
What is the standard in mounting of component on a PCB?
There are two methods of placing components on a printed circuit board (PCB). The first one is Through-Hole Mounting (THM) and the other one is specified as Surface Mount Technology (SMT). At EPR we use SMT as well as THM. Both methods have their advantages and disadvantages.
Why do we put coverslip on the mounting?
The main function of the cover slip is to keep solid specimens pressed flat, and liquid samples shaped into a flat layer of even thickness. This is necessary because high-resolution microscopes have a very narrow region within which they focus.
Why a cover slip must always be placed very gently while mounting the slide?
To avoid the air bubbles in the slide that can decrease the visibility of our specimen. Explanation: moreover the cover slip is places gently as for some very soft specimens there is the possibility of damaging it . but the main purpose is to avoid the air bubbles in the slide that hinders the clear vision.
Why we should take care when cover slip is mounted on the slide?
It protects the microscope and prevents the slide from drying out when it’s being examined. The coverslip is lowered gently onto the specimen using a mounted needle . It is important that no air bubbles are trapped underneath.
What are the factors that may affect mounting of tissues?
There are a number of factors that will affect the fixation process:
- Buffering.
- Penetration.
- Volume.
- Temperature.
- Concentration.
- Time interval.
Why do we clear before mounting?
Organic solvents are completely unpolar, so before mounting you have to dehydrate the tissue. Dehydration and clearing usually causes some amount of tissue shrinkage, but you can minimize this or at least make sure that shrinkage is fairly isometric by doing it carefully.
How do you remove air bubbles during mounting?
Apply a vacuum: You can remove air bubbles by placing the slide into a vacuum. THe bubbles will expand and move out beneath the cover glass. Dehydrate the specimen: Place the specimen into alcohol. Some specimens will shrink and lose water and air.
What is the mounting process?
Mounting is a process by which the operating system makes files and directories on a storage device (such as hard drive, CD-ROM, or network share) available for users to access via the computer’s file system.
How is mounting done?
Mounting may done by encapsulating the specimen in a polymeric material or by clamping with a mechanical device. In some cases, specimens are not mounted. For example, large-sized specimens may not be mounted. Also, automatic grinding and polishing machines have holders that may not require mounted samples.
What is the role of a mounting medium?
The main purpose of mounting media is to physically protect the specimen; the mounting medium bonds specimen, slide and coverslip together with a clear durable film. The medium is important for the image formation as it affects the specimen’s rendition.
What is PCB handling?
PCB Handling Precautions for Development, Production and Storage. PCBA development is an iterative process for improving quality. The most desirable attributes of this process are speed, which provides time to achieve optimal quality, and flexibility, which allows for prototyping options such as parallel design.
What can you do with circuit boards?
Here are 10 of the most common PCB applications by industry.
- Medical Devices.
- LEDs.
- Consumer Electronics.
- Industrial Equipment.
- Automotive Components.
- Aerospace Components.
- Maritime Applications.
- Safety and Security Equipment.
Are PCBs delicate?
Circuit boards are not nearly as fragile, “high-tech,” and complicated as they superficially appear. The process of working with them can be very straight-forward, as long as you follow some simple preparations, procedures, and precautions.
What is through-hole mounting?
Through Hole Technology Mounting (THT) is the process of mounting on the PCB components with leads using plated through holes. Before the invention of the SMT ( Surface mount technology) all components were assembled to the PCB with leads going through component holes in the board.
What is component mounting react?
Mounting is the phase in which our React component mounts on the DOM (i.e., is created and inserted into the DOM). This phase comes onto the scene after the initialization phase is completed. In this phase, our component renders the first time.
Contents