A 6.6V 1100mAh LiFePO4 battery has a NOMINAL voltage of 6.6 volts and a storage capacity of 1100 milliamp hours, or 1.1 amp-hours. LiFePO4 packs are made up of individual cells that are connected together in SERIES. Connecting cells in series adds the voltage of all cells to result in a total pack voltage.
What voltage should LiFePO4 batteries be stored at?
In the case of LiFePO4 chemistry, the absolute maximum is 4.2V per cell, though it is recommended that you charge to 3.5-3.6V per cell, there is less than 1% extra capacity between 3.5V and 4.2V. Over charging causes heating within a cell and prolonged or extreme overcharging has the potential to cause a fire.
What is the full voltage of a LiFePO4 battery?
Individual LiFePO4 cells have a nominal voltage of 3.2 volts. They are fully charged at 3.65 volts and fully discharged at 2.5 volts. You can buy individual LiFePO4 cells online, though they’re harder to find than 12/24/48V LiFePO4 batteries.
How should LiFePO4 batteries be stored?
Here’s a summary of how to store your LiFePO4 battery: Recommended storage temperature: -5 to +35°C (23 to 95 °F) Storage up to 1 month: -20 to +60°C (4 to 140 °F) Storage up to 3 month: -10 to +35°C (14 to 95 °F)
How low can you discharge a LiFePO4 battery?
LiFePO4 batteries can be continually discharged to 100% DOD and there is no long-term effect. However, we recommend you only discharge down to 80% to maintain battery life.
Can you charge LiFePO4 battery with a normal charger?
You can use a lead-acid charger to charge lithium batteries as long as you can set the maximum voltage of the charger and as long as the charger does not have an automatic equalisation mode enabled.
How do you charge a LFP battery?
The ideal way to charge a LiFePO4 battery is with a lithium iron phosphate battery charger, as it will be programmed with the appropriate voltage limits. Most lead-acid battery chargers will do the job just fine. AGM and GEL charge profiles typically fall within the voltage limits of a lithium iron phosphate battery.
Is it OK to leave a LiFePO4 battery on the charger?
For a lithium-ion battery with a low maintenance charging procedure and battery management system, it’s perfectly fine and better than leaving them discharged for long periods. For other types of batteries, not so much.
Does I need BMS for LiFePO4?
Contrary to popular belief YOU DO NOT NEED A BMS TO TAKE CARE OF LIFEPO4 BATTERIES, however if you do not use a BMS you must monitor your pack manually, the good news here if your pack is well balanced to begin with you will only need to check your pack maybe every 20 to 40 charge discharge cycles.
How many solar panels do I need to charge a 100Ah battery?
3 solar panels
A fully discharged 12V 100Ah auto battery will need 3 solar panels each rated at 100 watts to fully recharge in one day, assuming average 4 peak-sun-hours. A 100Ah lead-acid deep-cycle battery discharged to 50% of it’s capacity will need 2 solar panels each rated at 100 watts to fully recharge in one day.
How do you store 12 volt lithium batteries?
Store your battery in an area with ambient temperatures between 40F – 95F (4C – 32C). In general, extreme cold or heat will shorten your battery’s lifespan. The cells inside your battery will stay healthier and last longer if they are stored at room temperature.
Do LiFePO4 batteries need to be vented?
A lightweight option which offers charging efficiency and between 3000-5000 life cycles makes LiFePO4 the best choice for a better battery. To ensure the utmost safety and minimal impact, our chemistry utilizes only environmentally acceptable materials and has zero emissions with no venting needed.
How do you store 12 volt batteries long term?
Place the battery in a cool and dry storage area, preferably in your garage and away from the living areas in your home. If you’re storing it in the garage, put a wooden pallet or a couple 2×4’s under the battery. Concrete gets cold in the winter, and cold drains batteries fast!
What does 80 percent depth of discharge mean?
For example, if the manufacturer of a 10 kWh battery recommends a maximum DoD of 80 percent, you shouldn’t use more than 8 kWh from the battery without recharging. You can see why DoD is an important factor to consider: a higher DoD means you can use more of the energy being stored in your battery.
What is the minimum voltage for a lithium ion battery?
Lithium-Ion batteries should never be depleted to below their minimum voltage, 2.4 V to 3.0 V per cell.
What is nominal voltage of a battery?
Definition: Voltage of a fully charged cell or battery when delivering rated capacity at a specific discharge rate. The nominal voltage per cell is 2V for Lead Acid, 1.2V for Nickel-Cadmium, 1.2V for Nickel Metal Hydride and 3.9V for Lithium Ion (small cells only).
How fast can you charge LiFePO4?
A lithium battery can be charged as fast as 1C, whereas a lead acid battery should be kept below 0.3C. This means a 10AH lithium battery can typically be charged at 10A while a 10AH lead acid battery can be charged at 3A.
Is LiFePO4 the same as lithium ion?
The LiFePO4 battery has the edge over lithium ion, both in terms of cycle life (it lasts 4-5x longer), and safety. This is a key advantage because lithium ion batteries can overheat and even catch fire, while LiFePO4 does not.
Can you charge LiFePO4 battery with car alternator?
Can I recharge my lithium battery from my vehicle alternator? – Yes, but not necessarily to full charge, due to the fact that most Alternators are adjusted for the lower voltage requirements of the vehicle Lead/Acid Battery (approximately 13.9-Volts). Lithium Batteries require 14.4 to 14.6-Volts to fully charge.
How do you charge a 48v LiFePO4 battery?
Plug it in, connect your battery and the charger does the rest. It will bulk charge the battery using Constant Current (CC) and then switch to Constant Voltage to complete the charging process to 100% capacity.
Can Lifepo4 batteries be connected in series?
Actually,most 12V Lifepo4 battery doesn’t support multiple series conenction. This will burn the BMS and cause damage of the battery easily. But VTC Power adopt advanced and special BMS,which can be connected up to 4pcs. But for 24V,48V Lifepo4 battery,we don’t suggest series connection,but paraleil connection.
Contents