1. Door jamb. Door jambs are the interior sides of the doorframe. The word jamb comes from the French word jambe, which means leg and door jambs are sometimes also called the legs.
What is the jamb side of a door?
The door jambs are the vertical components of the door frame on either side of the door. You may also hear them described as the hinge jamb (for the side with door hinges) and the strike jamb (the side that contains the strike plate and works with the locking mechanism).
What are the sides of a door or window opening called?
Vertical frame members are called ‘side jambs‘; the top, horizontal piece is the ‘head jamb’; the bottom, horizontal piece is the ‘sill’.
What is a door jamb and casing?
Door head: The horizontal component found just above the door, with two grooves the door jambs are built to fit into.Jamb casing: Also called an architrave, this is a decorative trim mounted to the wall around the frame. It’s generally separate from the frame itself, meaning it can be removed or replaced easily.
What are parts of a door called?
The body of any door is essentially made of three main parts: the stiles, rails and panels but there are many more elements. To help explain the most common terminology, here we have put together an illustration of a standard door and door frame, with the component parts highlighted.
What are the parts of a door jamb called?
Parts of a Door: Learn About the Anatomy of a Door
- Door Frame. Side jambs, head jambs, and mulls (oh my!) are the parts that make up the frame.
- Head jamb. The top horizontal section of a door or window frame is called the head jamb.
- Side jamb.
- Mullion (mull)
What is a door header?
A header is a beam that spans the opening for a doorway, window, skylight, or stairway.Now, the word header refers to a beam-like support in wood-frame construction. The header spans an opening for a window or door, or it is a cut-out in the roof or floor for a skylight, chimney, or staircase.
What are the sides of a window called?
Jambs are the main vertical parts forming the sides of a window frame. A sill is the main horizontal part forming the bottom of the frame of a window. A jambliner is a strip which goes on the sides of a window frame that provides a snug fit for the window sash.
What is a door flange?
This term actually refers to a milled piece of wood that is used around the exterior of a window or door; and the exterior siding, stucco, or brick would butt up to it. Nowadays, this term also refers to vinyl and metal exterior flanges with a similar profile to the wooden ones.
What are the different types of door casing?
Four popular door casing styles include farmhouse, craftsman, minimal, and colonial.
What is door shutter?
Among them, the door shutters are a movable barrier consisting of a panelled assembly or otherwise which fits into the frame. It is the openable part of the door. They are an assembly of styles, panel and rail. It is used to open or close the way to go inside or outside of a house or rooms.
What is door buck?
A door buck is a jig that holds the door securely on edge and prevents it from moving while you are planing, routing for hinge mortises or lock installation preparation. Buck was an 1800’s term for sawhorse. So a door buck is basically a door sawhorse.
What are the parts of an exterior door?
Parts of a Door
- Doorway. A doorway is one of the easiest parts of a door to see.
- Door Frame. A door frame is what supports the door and consists of the head, jamb and sill.
- Head or Door Head. The door head is a horizontal section of the door frame that is located at the very top.
- Door Panel.
- Jamb.
- Sill.
- Threshold.
- Rail.
What is a door latch?
Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.
What is a sash on a door?
A sash is a moveable piece of glass that is used in a window or door. Several sashes are typically joined together to make a frame of glass panels.A sash can also be used in cabinetry to create unique cabinet doors.
What is the frame around an exterior door called?
The frame (sometimes called a jamb) is made up of three separate pieces and surrounds the door creating a “frame” in which the door can sit. The two vertical frames are called side jambs, and the horizontal frame is referred to as the head jamb.
What is a door mullion?
A mullion is a part of a frame that divides or separates the frame into different sections.On a detailed hollow metal frame, for example, a mullion will separate pieces of glass, panels, or will separate a door and the glass or panels. On a pair of doors a mullion can separate the two doors from each other.
What are the parts of a door hinge?
Most hinges consist of three basic parts: leafs, a knuckle and a pin. Leafs are the rectangular-shaped plates on the sides of a hinge. A knuckle is a cyldrical-shaped tube that’s created when the leafs are joined together. A pin is a solid metal rod that’s inserted through the knuckle to interlock the leafs.
What is a door frame header?
A header is one type of beam placed over a door frame for structural support. These header beams are common for exterior door frames and bearing walls. Header beams transfer the load from the opening above to the jack studs supporting it.
What supports a door header?
In the real world of architects, carpenters and lumberyards, these bridges are called headers (Fig. A). The vertical pillars supporting each end (normally composed of 2x4s or 2x6s) are called king studs and trimmers (or jack studs). In most wood frame dwellings, headers are made of dimensional lumber installed on edge.
What is a transom on a door?
Transoms are stationary sections of glass placed above an entry door and its sidelights. They allow natural light to stream into your entryway. With two styles available to choose from, you can add design interest with a rectangular transom or elliptical transom.
Contents