three metres.
It’s easy to set up; you pair it with the Hub and it starts working immediately. During our tests it worked well and picked up most motion at a range of three metres within a claimed 94-degree field of view.
How can I extend my hive signal?
Using the Hive app:
Open the Hive app on your phone, you may be asked to log-in. Tap the Menu button and then Install Device. Your hub will then start looking for your signal booster. Once your signal booster appears on the screen, you can name it and press Save to complete setup.
Can the hive hub be in a cupboard?
For the hub to work at its best you should avoid placing it on the floor or in an enclosed area such as a cupboard. A table or shelf are better options, if possible.
Where should a hive hub be placed?
For the Hive Hub to work at its best you should put it on a table or shelf near to your broadband router, it should be a minimum of 50cm from the router. If you have a Hive Hub 360, this should be placed somewhere centrally in your home to allow better connection to your other Hive products.
Can hive run off WiFi?
Yes, your thermostat will continue to function on its pre-set schedule if not connected to WiFi. However, without Internet connection, you will not be able to control your thermostat remotely, but instead you will have to adjust the configuration from the thermostat itself.
Do hive plugs boost signal?
With Hive Active Plug, you can control your electrical devices remotely from your mobile, tablet, or laptop. They also act as signal boosters.
What is boost on hive?
8) Temporarily boost the heating
This button allows you to temporarily boost the heating. You can select the temperature, how long the boost lasts and choose to stop it at anytime. Hive Active Heating will ensure it reaches the desired temperature and stay there for as long as you specified.
Should I put my thermostat in the coldest room?
We would not advise putting the thermostat in the coldest room as this would not be a true reflection of the temperature of the rest of the house.If the thermostat senses cold, it will think that your entire home is just as cold. So it will tell your boiler to work harder which could increase your heating costs.
Can you move hive thermostat around the house?
If you are moving home and have Hive Active Heating installed, please leave all of your Hive Active Heating kit (receiver, thermostat and any Signal Boosters) at your old home. They form part of your central heating system, so must be left for the new occupier.
Where should thermostats be located UK?
Thermostats should be installed in a correct location within your home to ensure it can work at its most effective. We recommend installing a thermostat on interior walls, at an optimal height from the floor five feet or thereabouts is most commonly suggested.
Why is Hive hub flashing green?
Flashing Fast Green = Hub is trying to connect to the internet. Flashing Slow Green = Hub is trying to connect to the Hive servers or is in upgrade mode. Wait for 20 minutes and refresh your Hive app.
Can you use a second hand Hive hub?
The existing Hub is registered to the old occupier and cannot be transferred to someone new. For any other Hive products you will not be able to use them until you have purchased a Hive Hub and created your own Hive user account.
What temperature should central heating thermostat be set at?
Dropping the thermostat temperature within your home is one of the best ways to ensure your home heating is efficiently managed. Even just a difference of 1 degree celsius can have a large impact in your overall heating bills. Generally, anywhere between 19-21 degrees celsius should be comfortable for most homes.
Is there a monthly charge for Hive heating?
You must pay your first monthly payment under the payment plan at the point of purchase. If you buy any additional Hive product(s) at the same time as taking out a Heating Plan, you must pay for such products at the point of purchase.
Can Hive work without hub?
For Hive Active Heating a hub, a receiver and a thermostat are installed. When this service hasn’t been bought, the thermostat and receiver can also be installed without a hub. This is known as ‘stand-alone’ mode.
What does hive hub 360 do?
The Hive Hub 360 can detect alarms (smoke or carbon monoxide), dog barking and glass breaking. The smoke alarm detection is pretty useful to alert you if something happens at home when you’re not there.
How does hive work?
How Does Apache Hive Work? In short, Apache Hive translates the input program written in the HiveQL (SQL-like) language to one or more Java MapReduce, Tez, or Spark jobs.Apache Hive then organizes the data into tables for the Hadoop Distributed File System HDFS) and runs the jobs on a cluster to produce an answer.
What plugs work with hive?
TP-Link, Philips Hue and Amazon all make good smart plugs. But the great thing about our Hive Plugs is that, as well as doing all of the above, they work seamlessly with the rest of the Hive ecosystem, including our smart thermostat, lights, sensors and cameras. So you can get your home working around you.
How do I reset my hive booster?
To reset your Hive Signal Booster, press and hold the button for ten seconds. Once you see the light double flashing amber, you’re done! Try installing your Hive Signal Booster in your Hive app or online dashboard again.
What does boosting hot water do?
What is a Water Heater Booster? A hot water heater booster is a device that can be attached to your existing hot water heater. With it, cold water is mixed with hot water from an input valve and delivered to you. Then, if you have a tank water heater, the booster helps to conserve that hot water without wasting energy.
How do I calibrate my hive thermostat?
While calibrating
Want to speed up the process? There’s a special calibration cycle available in app version 10.15 onwards. To test that your Hive Radiator Valve is working while it calibrates, use the dial on the front to set it to a high temperature. The valve should open immediately.
Contents