Minimum diameter of bar used in slab is 8mm. As per IS 456:2000 minimum diameter of bar used for column is 12mm. All structural engineer recommends 12mm dia bar as minimum diameter of bar for beam.
https://www.youtube.com/watch?v=eJH01VeJU3g
What is the minimum diameter of bar?
As per IS 456:2000, in rcc slab, minimum diameter of main bar should not be less than 8mm (highly yield strength deform bar HYSD) or 10mm (plain bar) and distribution bar should not less than 8mm.
What is the minimum diameter of bar to be used in a column?
The main longitudinal reinforcement bars used in column shall not be less than 12 mm in diameter.
Can I use 10 mm bar in column?
Minimum RCC beam size should not be less than 9″x 9″ (225MM X 225MM), with an additional slab thickness of 125 MM. A minimum of 4 bars, with 2 bars of 12 MM thickness in the bottom of the beam, and 2 bars of 10 MM at the top of the beam should be used.
Which mm rod is used for beam?
Iron rod size for 2 storey (G+1) building:– According to general thumb rule, we will assume a structure of G+1 (2 storey) residential building,using standard 9″ thick walls,we should use iron rod size of 10mm as mesh bar for footing, 6nos of 12mm size used for column, 4nos of 12mm size used for beam and 10mm & 8mm iron
How many bars are used in beam?
It depends upon the nature of building. For example a multi-storied building meant to be strong rather than a 3 storied building.
Ratio of Steel required to Cement Concrete.
| Different Parts of the Building | Requirement of Steel TMT Bars in Kg |
|---|---|
| Columns | 200-450 |
| Beams | 150-300 |
| Load Bearing Slabs | 150 |
What is the minimum reinforcement in beam?
The maximum tension reinforcement of the beam should not be greater than 0.04bD where “b” is the width of the beam and “D” is the Depth of the beam. But, minimum tension reinforcement should not be less than 0.3% and 0.2% of cross-sectional dimensional for plain bars and HYSD bar respectively.
Can we use 8mm for slab?
Bars in slab
like in slab we generally use 8mm, 10mm , 12mm because load is less as compared to beam , column, footing.
What is DIA of bar?
In India, there are different size/diameter of Steel bar used in construction are 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 45mm, 50mm and so, higher dai/size of steel bar like 60mm, 75mm, 90mm, 100mm are customise according to requirement by various Steel Company and are available for sale.
What should be the minimum diameter of a chair reinforcement?
Chair bars are used primarily on the slab and flooring. The diameter of the chair bar should not be less than 12 mm. Why Chair Bars Are Used In Reinforcement?
Which bar is best for column?
According to general thumb rule, we will assume a structure of G+0/1 storey/ground floor/one floor residential building, using standard 9″ thick walls, the best mm bar used for 1 storey/G+0 building, we should use steel bar of 10mm dia for footing, 12mm dia of steel bar used for column, combination of 10mm & 12mm dia
What is the minimum size of reinforcement bars in RCC columns?
The minimum size of rcc column is 9″ x 9″, contain steel reinforcement of 4 bars of 12mm with stirrups of 8mm steel rings at a distance of 150mm centre to centre.
What mm steel is used in construction?
Slabs in the building are constructed using steel bars having a diameter of 8mm, 10mm, 12mm. In the same way Beams and columns of the building are constructed using 12mm to 25mm diameter of steel bars. But it also depends on the load design and the span of the beam and column.
What is the standard size of beam for 3 storey house?
Plinth beam size for 3 storey (G+2) house:- for 3 storey (G+2) house or in simple 3 floor building, general thumb rule, using standard 9″ thick walls, size of Plinth beam should be 9”x 12” (230mm x 300mm) provided with 2 nos of 12mm bar at top, 3 nos of 12mm bar at bottom of Fe500 Steel with m20 grade of concrete and
What is the size of a steel bar?
TMT steel bars come in different diameters like 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 36mm and now some well-known TMT manufacturing companies are planning to manufacture in larger diameters. 8mm-10mm size bars are used in Slabs and Stair ups, which serves as a load bearing member in slab homes.
What is the full form of TMT bars?
The full form of TMT Bar/Rebar is Thermo Mechanically Treated bars. We all know that TMT Bars are essential for all type of construction purposes but it is also important to know how it is made. Best Quality TMT Bars pass through series of processes that determines the strength & flexibility of it.
Which slab thickness is minimum?
The minimum thickness of the RCC slab should be 5 inches.
What is the maximum diameter of bar to be used in a column?
Bars shall not be less than 12 mm in diameter for columns.
What is the minimum number of bars in rectangular column?
At least three bars should be there on each face i.e. minimum 8 bars required in rectangular column for an earthquake resistant design. 2. Closely spaced ties must be provided at the two ends of the column over a length not less than larger dimension of the column, one-sixth the column height or 450 mm.
What is the minimum bar size of tie bars?
8.1. 9.4 Ties : Tie reinforcement for compression members shall conform to the following: (a) All bars shall be enclosed by lateral ties, at least 10 mm ϕ in size for longitudinal bars 32 mm ϕ or smaller, and at least 12 mm ϕ in size for 36 mm ϕ to 57 mm ϕ and bundled longitudinal bars.
What is maximum and minimum reinforcement in a beam?
Minimum reinforcement steel is provided subject to the condition that maximum permissible spacing shall be 5 times the effective depth or 45 cms whichever is less. Maximum reinforcement in slab is restricted 1 to 2 % of gross sectional area.
Contents