Door kick plates are a sheet of material attached to the bottom of your door to protect it from damage. They get their name from when people kick the door open when they have their hands full.Bolstering your door with some extra protection makes sure you’re protecting your investment.
What is metal thing at bottom of door frame called?
The door sill is the very bottom part of the door frame that rests on the floor.
What do you call the metal plate on a door?
Strike Plate. A strike plate is the metal piece attached to the door jamb. As the door closes, the latch mechanism strikes the plate mounted to the jamb and the strike plate catches the mechanism and holds the door closed.
What is a strike plate?
Strike Plate
This is the plate the latch-tongue, or deadbolt-tongue will connect with. It should sit flush with the door jamb. Any passage or privacy set needs to have a strike plate for the door to latch. Additionally, deadbolts need a strike plate to properly lock.
What is a jamb kit?
Along with the metal frame we supply also the finishing joinery kit, sometimes called the jamb kit.The kit includes the vertical wooden jambs that cover the leading edges of the pocket and the top horizontal jambs that cover the top of the door/brackets.
What is a door flange?
This term actually refers to a milled piece of wood that is used around the exterior of a window or door; and the exterior siding, stucco, or brick would butt up to it. Nowadays, this term also refers to vinyl and metal exterior flanges with a similar profile to the wooden ones.
What are the parts of a door bolt called?
The Anatomy of Door Locks
- Traditional and electronic locks.
- The Cylinder: Also called the body, this is the part where the key is inserted.
- The Bolt: Also called the latch, the bolt engages the inside of the door.
- The Box:The bolt extends from the cylinder into a hole that is designed to fit the bolt perfectly.
What is a door stile?
Stiles This is the collective name for the vertical components that sit on the outside edge of a door. Lock stile This is the vertical edge of the door which sits on the opposite side of the door to the hinges, and contains the lock or latch.
What is a door reinforcement plate?
Reinforcers or door wrap around plates are three-sided metal plates that encase and strengthen the door around the latch, which is a door’s most vulnerable area.recess into the door edge so the reinforcer fits flush.
What is a door latch?
Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.
What is an electric strike on a door?
Electric strikes replace a standard door strike and is connected to a power supply. When an electric strike is activated, it releases the latch, unlocking the door. Electric strike locks remain locked from the outside at all times. When the door closes behind you, it automatically returns to a locked position.
What is the bottom of a door frame called?
Sill Sills
Sill. Sills are the bottom component of a door frame. They are the part of the door that gets sealed and fastened to the floor.
What is a pocket door jamb?
The jamb kit is a timber lining kit that is attached to the pocket door framework that covers the edges of the door when it is closed so you cannot see the top of the door or into the pocket.It gives the pocket door installation a professional finish.
What is a door header?
A header is a beam that spans the opening for a doorway, window, skylight, or stairway.Now, the word header refers to a beam-like support in wood-frame construction. The header spans an opening for a window or door, or it is a cut-out in the roof or floor for a skylight, chimney, or staircase.
What is a Brickmould?
Brickmold. Brickmold is used as casing around exterior doors. It is molding around the window and door frames that abuts the exterior facing material of the building and serves as an aesthetic boundary between the siding and the frame; most commonly used in pre-hung units.
What is a Florida flange?
Used mainly in concrete applications with block openings, the Florida Flange is attached to the wood framework or buck sealed to the masonry wall.
What is a lock plate?
Locking plates are fracture fixation devices with threaded screw holes, which allow screws to thread to the plate and function as a fixed-angle device 1 – 3. These plates may have a mixture of holes that allow placement of both locking and traditional nonlocking screws (so-called combi plates) 4 , 5.
What are the parts of a door latch?
Parts of a Door Lock
- Knobs and Handles. The common door lock will have two knobs or handlesone on the inside of the door and one on the outside.
- Rosette. The rose or rosette is typically a round plate that serves two functions.
- Lock Cylinder.
- Spindle.
- Latch Assembly and Spring Bolt.
- Deadlocking Plunger.
- Strike Plate.
What is a door cylinder?
The cylinder is the locking mechanism of an entry door set. It may be integrated with a the deadbolt of a mortise lock or mounted independently as part of a separate deadbolt.One can secure the door from inside, as well as exit the house without a key, making this the most popular option.
What are stiles and rails in a door?
A stile and rail wood door is constructed from many vertical and horizontal pieces that are combined with a certain number of panels on the door.This style of door provides a very decorative finish and a unique look to a building or space. They can be very complex or simple in construction and design.
What is the difference between a stile and a rail?
Stile and rail doors are constructed from horizontal rails and vertical stiles, with panels secured in between. Together, they give the illusion of a single carved piece of wood. Unlike a flat panel or flush wood door, making a stile and rail door requires more precise and complex construction techniques.
Contents