120 degrees Fahrenheit.
The Consumer Product Safety Commission (CPSC) recommends setting the water heater at no more than 120 degrees Fahrenheit (49 degrees Celsius) to prevent scalding.
What is the maximum temperature a water heater can be set at?
A new water heater is typically preset to a maximum temperature of 140 degrees Fahrenheit. Some say that’s the ideal temperature, while others argue that it’s better to reduce the maximum temperature to 120.
Is 130 too hot for water heater?
Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.
What is the maximum temperature that a hot water heater in a home should be set to in order to prevent scalding?
120 degrees Fahrenheit
It’s generally agreed that 120 degrees Fahrenheit is the maximum safe hot water temperature that should be delivered from a fixture. Therefore hot water above 120 degrees Fahrenheit can be considered hazardous. Model codes address this in various code sections.
Is 150 too hot for water heater?
The recommended setting for household water heaters is not 150 degrees, but slightly less _ 140 degrees.Water temperatures higher than 140 degrees can burn the skin and are particularly dangerous for young children and the elderly.
What is an acceptable temperature for hot water in showers?
There is no absolute rule for how hot a shower should be, but most dermatologists recommend keeping the temperature at an average of 98°F (37°C) to 101°F (38.3°C) or no more than 105 °F (41°C).
What is a good water temperature for shower?
The optimal temperature for shower water or bath water, so that it washes away environmental dirt and bacteria, is no higher than 112 degrees Fahrenheit, Cleveland Clinic dermatologist Melissa Piliang says. Few things feel better than a hot soak on a cold day.
Is 125 degrees to hot for water heater?
What’s a safe temperature for water? On the side of most water heaters, you’ll find a warning that says water temperatures of 125 degrees Fahrenheit can cause burns or death. To be safe, the water coming out of the plumbing fixtures in a home shouldn’t be any hotter than 120 degrees.
Is 120 too hot for water heater?
The EPA recommends 120 degrees because it’s hot enough to keep diseases at bay, it’s not hot enough to cause scalding, it will supply enough hot water for most small families and is relatively energy-efficient.
What is the ideal temperature for hot water in a house?
120 degrees Fahrenheit
The ideal temperature for domestic hot water is 120 degrees Fahrenheit, or 49 degrees Celsius, to avoid the possibility of scalding. Furthermore, if the water heater is set at too high a temperature, it can result in unnecessarily more expensive energy bills from the running water emerging from shower systems and taps.
What temperature should my hot water heater be set at in Australia?
70 degrees celsius
Under Australian law the internal temperature of a hot water heater must be set at 70 degrees celsius. This temperature kills harmful bacteria and preserves a safe operating temperature for your hot water system.
What temperature should a water heater be set to avoid burning a baby?
To prevent burns at home: Reduce water temperature. Set the thermostat on your hot water heater to below 120 F (48.9 C). Aim for bath water around 100 F (38 C).
What temperature should a hot water tank be set at in Canada?
Follow these tips for safe hot water temperature: Set the temperature of your water heater to 49°C (120°F) to prevent the growth of harmful bacteria such as Legionella. Prevent scalding by installing automatic mixing valves on faucets, showers, and tubs, or an anti-scald mixing valve on your water heater.
What happens if water heater is set too high?
When the temperature of the hot water tank is too high, it may affect its service life. However, when the temperature is too low, legionnaires disease can develop. Rule of thumb is safe bathing and showering temperature is 100 degrees Fahrenheit.
What should water heater be set at AB or C?
Know the Ideal Setting: The best setting for gas water heaters is around 115 to 120 degrees Fahrenheit. Oftentimes, water heaters will have additional options to either lower or increase the temperature of the water inside. In the case of the video’s water heater, A, B and C each have an increase of about 10 degrees.
How hot should the water heater be?
The standard temperature for most water heaters is 140 degrees F, but the Department of EnergyLink opens in a new tab recommends turning down the temperature to 120 degrees to save energy.
Is 60 degrees water hot?
In general, hot water is 130 F (54.4 C) or above. Warm water is between 110 and 90 F (43.3 to 32.2 C). Cold water is generally between 80 and 60 F (26.7 to 15 C).
What is the average shower temperature Celsius?
The ideal shower temperature for your skin is lukewarm or cooler. Hot water strips your skin of natural oils, which can lead to dry and itchy skin, so it’s best to stick to an average shower temperature of between 37°C and 38°C.
Is 115 too low for water heater?
Going too low creates the risk of bacteria growing in your pipes or water heater, but going too high leads to the danger of burning. To avoid either extreme, you’ll want to find a happy medium. We recommend always keeping the heater set between 110 and 120 degrees.
Is 135 too hot for water heater?
The American Society of Sanitary Engineering recommends that hot water tanks be set from 135 to 140 degrees, to inhibit the growth of Legionella bacteria, with the installation of anti-scald devices and tempering valves to prevent hot water injuries.
Contents