Bore holes.
Bore holes are the holes in the door that house your door hardware and allow it to be installed. The cross bore is the main hole drilled into the face of the door where the body of the lock (chassis) is installed.
What are the parts of a door frame?
Door part names
- Door frame. The door frame is the entire framework supporting the door, including the sill, jamb and head.
- Sill. The door sill is the very bottom part of the door frame that rests on the floor.
- Jamb/door jam.
- Head.
- Panel.
- Astragal.
- Fixed panel.
- Door sweep.
What is the gap between door and frame called?
When two individual windows or a door and window are joined, the seam between the frames of the two units is called the mull, which is short for mullion. In this case, a door jamb has been joined to a window/sidelight jamb.
What is a door strike plate?
Strike Plate
This is the plate the latch-tongue, or deadbolt-tongue will connect with. It should sit flush with the door jamb. Any passage or privacy set needs to have a strike plate for the door to latch. Additionally, deadbolts need a strike plate to properly lock.
What do you call the parts of a door?
The body of any door is essentially made of three main parts: the stiles, rails and panels but there are many more elements. To help explain the most common terminology, here we have put together an illustration of a standard door and door frame, with the component parts highlighted.
What is a door flange?
This term actually refers to a milled piece of wood that is used around the exterior of a window or door; and the exterior siding, stucco, or brick would butt up to it. Nowadays, this term also refers to vinyl and metal exterior flanges with a similar profile to the wooden ones.
What is a jamb kit?
Along with the metal frame we supply also the finishing joinery kit, sometimes called the jamb kit.The kit includes the vertical wooden jambs that cover the leading edges of the pocket and the top horizontal jambs that cover the top of the door/brackets.
What is the thing called that the door latch goes into?
The latch bore, also known as the edge bore, is the hole drilled from the side of the door into the cross bore to allow the latch of the lock to be installed and to accommodate the sliding of the deadbolt. The diameter of the latch bore is generally 1 to accommodate bolts from either mechanical or electronic locksets.
What is a door latch?
Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.
What is the latch plate?
Latch guards are metal plates that cover exposed latches and keep them from being tampered with. In order to gain forced access, a latch may be cut or pryed; but a latch guard can keep this from happening.
What are mullions on a door?
A mullion is a part of a frame that divides or separates the frame into different sections. Mullions can be integral parts of the frame or they can be removable, depending on the application. Mullions can be vertical or horizontal pieces.On a pair of doors a mullion can separate the two doors from each other.
What is a door jamb and casing?
Door head: The horizontal component found just above the door, with two grooves the door jambs are built to fit into.Jamb casing: Also called an architrave, this is a decorative trim mounted to the wall around the frame. It’s generally separate from the frame itself, meaning it can be removed or replaced easily.
What is the door sash?
A sash is a moveable piece of glass that is used in a window or door. Several sashes are typically joined together to make a frame of glass panels.A sash can also be used in cabinetry to create unique cabinet doors.
What is a Brickmould?
Brickmold. Brickmold is used as casing around exterior doors. It is molding around the window and door frames that abuts the exterior facing material of the building and serves as an aesthetic boundary between the siding and the frame; most commonly used in pre-hung units.
What is a renovation window?
The installation of a renovation window (also known as a rebate window or rebate flange window) allows you to upgrade your older home’s wood or aluminum windows without having to cut into the building envelope (siding and/or wall).
How do you fill gaps in a wood door?
Follow these simple steps to repair cracks on a solid door.
- Choose between wood putty and filler.
- Apply filler onto the crack.
- Allow adequate drying time.
- Sand the surface.
- Paint the surface.
- Use epoxy glue for medium-sized cracks.
- Fix large cracks using wood splines.
How do you fill gap between laminate and door casing?
Spread a bead of silicone caulk in the gap between laminate flooring and the threshold of an exterior door. Run your finger over the caulk to tool it the same way you would tool caulk along the edge of trim or along a window.
What is a pocket door jamb?
The jamb kit is a timber lining kit that is attached to the pocket door framework that covers the edges of the door when it is closed so you cannot see the top of the door or into the pocket.It gives the pocket door installation a professional finish.
What is a sliding door jamb?
Interior Parts and Hardware of a Sliding Patio Door
The frame is what surrounds and supports the entire door system of a sliding patio door.The jamb consists of the main vertical parts that form the sides of the door frame.
What is a car door jam?
The doorjamb is the part of the car where the door attaches to the frame of the vehicle. It acts as a seal between the interior and exterior of the car, protecting it from dirt and dust. Car companies use a layer of grease to help the mechanism work efficiently and quietly.
What is a lock jamb?
strike jamb, lock jamb
The vertical member of a doorframe on which the strike plate is installed.
Contents