A knob is generally a round shape which is used to grab with your hand and open a door. Knobs are made of brass, zinc die cast or other products. The latch is the mechanism that slides into the enge of the door and retracts or protrudes with the turn of the door knob.
What is the metal piece between doors called?
Astragal: A strip of steel or wood, which covers or closes the gap between the edges of a pair of doors. Some types overlap, others meet at the center line of the gap.
What is entry door hardware?
The entry door hardware is the lock and handleset installed on any exterior door that leads into the home, like those at the front door or even the inside garage or basement doors. To ensure basic functionality and style, entry set selections include different types of doorknobs, levers, and locks.
What are the types of door hardware?
Dead bolts and door knobs: These are available with locking system and a key insertion slot. For door handle purpose, bolts and knobs are available without the locking system. Touch panel or electronic locks: Locks with touch panels or electronic system saves you the hassle of keys.
What are the parts of a door latch called?
The Anatomy of Door Locks
- Traditional and electronic locks.
- The Cylinder: Also called the body, this is the part where the key is inserted.
- The Bolt: Also called the latch, the bolt engages the inside of the door.
- The Box:The bolt extends from the cylinder into a hole that is designed to fit the bolt perfectly.
What is a door flange?
This term actually refers to a milled piece of wood that is used around the exterior of a window or door; and the exterior siding, stucco, or brick would butt up to it. Nowadays, this term also refers to vinyl and metal exterior flanges with a similar profile to the wooden ones.
What is the door sash?
A sash is a moveable piece of glass that is used in a window or door. Several sashes are typically joined together to make a frame of glass panels.A sash can also be used in cabinetry to create unique cabinet doors.
What is tubular door hardware?
Tubular locks are commonly found on all types of doors and are ideally suited for new (post-1950’s) pre-drilled doors. Tubular locks have a spindle assembly that extends into or through the center of the latch, allowing for retraction of the latch bolt when the lever or knob is rotated.
What is a cross bore on a door?
The cross bore is the small hole on the edge of the door. The door latch is inserted into the cross bore first. The latch goes through into the large bore hole and then the door knob is mounted The backset is the distance from the edge of the door to the center of the large bore hole.
What are the different types of door handles?
There are three main types of door handles: lever handles, pull handles and door knobs.
What are push door handles called?
panic exit device
A crash bar (also known as a panic exit device, panic bar, or push bar) is a type of door opening mechanism which allows users to open a door by pushing a bar.
What are the circular door handles called?
Classic Door Knobs: Often rounded or shaped like a sphere, these are easy to grip and twist. These simple, traditional knobs work well with almost any home interior. This style is easy to find and replace if needed.
What is the difference between passage and privacy door knobs?
2) Privacy Door Knobs – Privacy Door Knobs are generally used on bedrooms and baths. They are lockable but do not have a keyed cylinder.3) Passage Door Knobs – Hall and Closet or Passage knob sets do not lock. They are generally used on closets or other doors where a lock is not required.
What is the strike plate on a door?
Strike Plate
This is the plate the latch-tongue, or deadbolt-tongue will connect with. It should sit flush with the door jamb. Any passage or privacy set needs to have a strike plate for the door to latch. Additionally, deadbolts need a strike plate to properly lock.
What is a latch faceplate?
Faceplate. A metal plate on the edge of the door, next to the latch or deadbolt, the faceplate protects the lock from wear and tear. It may have rounded corners or be a circular drive-in faceplate. The shape of the faceplate used during installation depends on your door’s preparation.
What are the parts of a door frame?
Door part names
- Door frame. The door frame is the entire framework supporting the door, including the sill, jamb and head.
- Sill. The door sill is the very bottom part of the door frame that rests on the floor.
- Jamb/door jam.
- Head.
- Panel.
- Astragal.
- Fixed panel.
- Door sweep.
What is a Brickmould?
Brickmold. Brickmold is used as casing around exterior doors. It is molding around the window and door frames that abuts the exterior facing material of the building and serves as an aesthetic boundary between the siding and the frame; most commonly used in pre-hung units.
What is window fin?
A nail (or nailing) fin is a thin piece of metal extending from the window itself that goes all the way around the perimeter of the window frame. This piece adds to the window’s permanence and is nailed directly to the house’s frame (studs), hidden between the interior and exterior of your home.
What is the difference between door frame and door jamb?
Many people confuse a door jamb and a door frame. A simple way to remember it is that a door jamb is part of a door frame. The flat surface that runs vertically up either side of the door frame is the jamb.
What is wood sash?
Wood windows include a frame and a sash that are made of solid wood. Fiberglass. Fiberglass windows include a frame and sash made from a patented five-layer fiberglass material.
What is window sash meaning?
A window sash is the part of the window that holds the glass and the framework around the glass to keep it in place. Window sashes are fitted into the window frame and may or may not be movable. Most windows in newer homes are sash windows.
Contents