What Is The Easiest Way To Install Curtain Rods?

How can I make my curtain rods slide easier?

1. Remove the curtains from the rod. Remove the rod from the window, if possible, to make it easier to work on.
2. Rub the stub of a candle over the top of your curtain rod. This deposits a fine layer of candle wax along the top of the rod.
3. Slip the curtain rings over the rod once more and remount the rod over the window.

Is installing curtain rods easy?

Hanging curtain rods is fairly simple and you don’t need many tools to do it.If you’re using a long curtain rod or need extra support for heavyweight curtains, you can make marks for your center bracket after completing the end brackets. Drill guide holes where you’ve placed your marks for the mounting hardware.

Can you install curtain rods without a drill?

You can use adhesive hooks or a tension rod to hang up curtains without a drill.

How do you lubricate curtain tracks?

Try spraying Mr Sheen or similar wax polish onto a rag and wiping it on. It’s carnauba wax so should be nice and slippery. Just the action of cleaning the rails ought to help because they’re probably gummed up with worn-off plastic.

How far should a curtain rod extend past window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

How wide should you hang curtain rod?

Each curtain panel should be at least as wide as your window. Measure from the spot you plan to hang the rod (usually four to six inches above the window, but a minimum of two inches) to the floor to figure out the length of the curtains.

Do curtain rods need studs?

Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.TIP: If you could have a stud in your wall, use a 1/8? drill bit to check first. You will know if there is wood!

Do curtains have to touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.

Can you hang curtain rod with command strips?

They can be merely decorative, or they can serve to block out the light. Many landlords don’t allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.

Can you install curtains with a screwdriver?

A handheld screwdriver works well for the last few turns. Once you have your brackets attached to the wall, you’re ready to hang your curtain rod! It’s easiest to thread your curtains on the rod beforehand.

What can I use in place of a curtain rod?

copper pipes
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.

Can you use wd40 on curtain tracks?

For regular maintenance of cord or hand operated curtain tracks we recommend the use of a silicone based lubricant applied to the track extrusion, runners and all moving parts in a cord operated track.Oil based lubricants such as WD-40 are NOT suitable.

How do you clean curtain poles?

Wrapped Poles
Ordinary dirt, smudges and water-soluble stains may be removed with mild soap and water. Use a clean cloth or soft sponge to dab the stain with soapy water. Remove the soap solution by wiping the area with a cloth and clean water. Dry with a soft lint free cloth or towel.

Do rod pocket curtains slide easily?

Rod pocket curtains are more difficult to open and close because the material doesn’t slide easily along the rod. Rings or pin hooks make adjusting curtains easier. If you use pins or rings, make sure they are strong enough to support the weight of the curtain.

Does the tag on curtains go on the top or bottom?

Make sure your curtains are wide enough!

How much wider than window should curtain be?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.

How far should curtain Pole be either side of window?

For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again. Then cut the pole to your required width (excluding finials).

How high should curtains be off the floor?

The proper position is ? inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.

How can I hang curtains without drilling holes?

Put your drill and spackle aside, and let’s get started.

1. Use 3M Command Hooks.
2. Try Kwik-Hang Curtain Rod Brackets.
3. Use Tension Rod Curtains.
4. Get Creative With Coat Hooks.
5. Try Magnetic Curtain Rods on Metal Doors.
6. The #1 Way to Hang Curtains Without Wall Damage.

How do professionals hang curtains?

Rest easy — we’ve got you covered with our fool-proof curtain-hanging tips and information.

1. Hang them high. Especially in rooms with low ceilings, be sure to hang your curtain rod as high as possible.
2. Hang them wide.
3. Hang them in the right length.
4. Hang the right amount of panels.
5. Hang the right style of panel.