The default IP address for the Hikvision IP camera is 192.0. 0.64, and you may change it to meet your local network subnet range.
What is default IP address of Hikvision IP camera?
IP CAMERA DS-2CD2042WD-I(4mm) – 4.0 Mpx Hikvision
Standard: | TCP/IP |
---|---|
Default IP address: | 192.168.1.64 |
Web browser access ports: | 80 |
PC client access ports: | Port no.: 8000 or access by a cloud (P2P) – iVMS-4200 application |
Mobile client access ports: | 8000 |
How do I find my cameras IP address?
The easiest way to find the security camera IP address is to check the Network page on the CCTV camera software (mobile app or PC client). The network page will display all the IP address information of your camera.
How do I change my Hikvision camera default IP address?
Download and install the SADP tool in your computer and just open it up to start the Hikvision IP camera configuration process. If your IP camera is correctly connected to your network it might get an IP from your router. If it doesn’t, you can find the camera with its default IP address which is 192.0. 0.64.
How do I make my Hikvision camera default?
Step-by-step to reset your camera Hikvision camera to factory defaults:
- Disconnect the camera power supply;
- Press and hold the reset button;
- Connect the camera power supply;
- Keep holding the reset button for 15 seconds;
- Release the reset button.
What is the default gateway of IP camera?
The Default Gateway is the IP address of the router.
What is HIK Connect server address?
To do this we will navigate using the web-based GUI to Configuration >> Network >> Advanced Settings >> Platform Access and ensure that it is enabled and the “Platform Access Mode” is set to Hik-Connect, we will then ensure that the “Server Address” is ‘dev.eu.hik-connect.com‘ and press “Save”.
How do I locate my IP address?
On an Android/tablet
Go to your Wifi network settings, then select the network you’re connected to. You’ll find your IP address along with the other network information.
What is IP helper address?
DHCP IP Helper addresses are IP addresses configured on a routed interface such as a VLAN Interface or a routers Ethernet interface that allows that specific device to act as a “middle man” which forwards BOOTP (Broadcast) DHCP request it receives on an interface to the DHCP server specified by the IP Helper address
How can I get Hikvision IP camera online?
How to Use Your Computer to Set up Hik-Connect for Remote Camera Viewing
- Make sure that your Hikvision system is set up locally and that your cameras are viewable on your NVR or DVR.
- Connect your NVR to your network by running an ethernet cable from the LAN port on your NVR or DVR directly to your router.
Do IP cameras have an IP address?
The default IP address of a security camera recorder from CCTV Camera World is 192.168. 1.108. Your IP address may be different because of two possible reasons: If you have enabled DHCP for the QR code based remote viewing method your recorder is getting an IP address from your router.
How do I assign an IP address to a camera?
To assign a static IP address to one camera:
- Locate the camera you want to change from the list.
- Double-click the IP Address field and enter the static IP address. DHCP is automatically disabled for the camera.
- Double-click the Subnet Mask field and the Default Gateway field to enter the required values.
How do I connect my IP camera without a PoE switch?
Option One: Connecting PoE NVR for IP Cameras Without PoE Switch
- Use an Ethernet cable to connect the router and PoE NVR. Make sure the NVR can access the Internet.
- Connect IP cameras to the PoE NVR directly by Ethernet cables.
- Connect the NVR and a monitor or TV via a VGA or HDMI cable.
How do I access Hik-Connect online?
Steps:
- Open the web browser on your PC.
- Input the device IP address and press the Enter key on your keyboard.
- Input the device user name and the device password to login.
- Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page.
- Check Enable.
- Tap Save to save the settings.
Why Hik-Connect is not working?
Make sure the device is powered on and then tap OK on the Initialize Device page to enter the Network Connection page. Note: If you have set the device before, you should reset the device. Tap How to Reset and follow the instructions to reset your device.
What IP address is?
Here’s how to find the IP address on the Android phone:
Go to your phone’s settings. Select “About device.” Tap on “Status.” Here you can find information about your device, including the IP address.
What is static IP address?
Static IP addresses
A computer on the Internet can have a static IP address, which means it stays the same over time, or a dynamic IP address, which means the address can change over time.
What is IP address example?
An IP address is a string of numbers separated by periods. IP addresses are expressed as a set of four numbers — an example address might be 192.158. 1.38. Each number in the set can range from 0 to 255.
What is option 82?
Option 82 is called the relay agent information option and is inserted by the DHCP relay agent when forwarding client-originated DHCP packets to a DHCP server. Servers recognizing the relay agent information option may use the information to implement IP address or other parameter assignment policies.
How do I set up IP Helper?
Configuring an IP helper address
- Enter the global configuration mode by issuing the configure terminal command. device# configure terminal.
- Enter the interface configuration mode.
- Add a helper address for the server.
- By default, an IP helper does not forward client broadcast requests to a server within the network.
What is IP forward protocol ND?
The ip forward-protocol nd command simply means that the router will forward ND packets for diskless workstations. This is rather obsolete. The ip http commands are for the HTTP server in the router itself. It is a way to configure the router with HTTP, and it means nothing to anything else connected to the router.
Contents