What Is The Correct Way Of Carrying A Microscope Brainly?

How to carry the microscope. When carrying the microscope, hold its arm securely with both hands. When carrying the microscope, do not hold the focus knobs, eyepiece tube, stage, or other components as it may result in those parts coming off and cause of trouble.

What are the correct way of carrying a microscope?

Always carry the microscope with 2 hands—place one hand on the microscope arm and the other hand under the microscope base. Do not touch the objective lenses (i.e. the tips of the objectives). Keep the objectives in the scan position and keep the stage low when adding or removing slides.

What is the proper way of carrying a microscope Brainly?

1. To carry the microscope, grasp the microscope’s arm with one hand. Place your other hand under the base.

Which of the following is the correct way of carrying Microsoft?

Answer: Explanation:When moving your microscope, always carry it with both hands .

What is the proper way to carry a microscope quizlet?

To carry a microscope, grip the arm with one hand and place the other hand underneath the base.

Why does a microscope stage have a hole in it?

The stage illustrated in Figure 1 also contains a rather large opening in the center to allow light from the condenser to pass through the specimen (the stage opening).

Which part of the microscope should you hold when lifting or moving the microscope?

The microscope arm connects the eyepiece tube to the base. This is the part you should hold when transporting a microscope.

Which if the following sentences regarding microscope care and handling is correct?

Which of the following sentences regarding microscope care and handling is correct? Carry the microscope by the arm. Use a paper towel to clean ocular and objective lenses before and after use. Never use a coverslip with wet mount preparations.

See also  What Is Focal Point In Photography?

Where is the stage clip on a microscope?

Stage clips
Most of the time, these will clip against the sides of the slide. They do not sit above or below the slide. They are spring-loaded to hold the slide edges and lock the slide in place so that the stage controls can move the position of the slide smoothly.

What is the safest way to carry a microscope quizlet?

WHEN TRANSPORTING THE MICROSCOPE, HOLD IT IN AN UPRIGHT POSITION WITH ONE HAND ON ITS ARM AND THE OTHER SUPPORTING ITS BASE. AVOID SWINGING THE INSTRUMENT DURING ITS TRANSPORT AND JARRING THE INSTRUMENT WHEN SETTING IT DOWN. THE MICROSCOPE LENS MAY BE CLEANED (WITH ANY SOFT TISSUE).

What is the correct order when using a microscope?

Terms in this set (12)

  1. carry the microscope with two hands, holding the arm and base.
  2. put the microscope on the lab table so the arm is facing you.
  3. plug the microscope in and turn on the light.
  4. turn the nose piece until the low power objective is into place.

What is the proper way to carry a compound microscope and clean it quizlet?

Terms in this set (11)
Always carry the microscope with two hands. One goes under the base and the other holds the arm. Place the microscope away from the edge of the table with the arm facing toward you. ONLY use lens paper to clean the lenses of the microscope.

What does the stage clips do on a microscope?

Stage Clips are used when there is no mechanical stage. The viewer is required to move the slide manually to view different sections of the specimen. Aperture is the hole in the stage through which the base (transmitted) light reaches the stage.

See also  Which Camera Is Best For Maldives?

What part of the microscope holds the slide?

Stage clips
Stage: The flat platform where you place your slides. Stage clips hold the slides in place.

What two parts do you place your hands while carrying a microscope?

When you move your microscope, you should always use two hands. Place one hand around the arm, lift the scope, then put your other hand under the base of the scope for support.

Where do you hold a microscope?

Always grip the microscope by the arm and put your hand beneath its base. Hold the scope upright at all times. Do not bump it against anything.

Which part of the microscope holds and supports the specimen?

Stage – This is the section on which the specimen is placed for viewing. They have stage clips that hold the specimen slides in place. The most common stage is a mechanical stage, which allows the control of the slides by moving the slides using the mechanical knobs on the stage instead of moving it manually.

Why should you carry the microscope with both hands?

This will improve lamp longevity and save energy. When carrying the microscope, always use two hands with one hand supporting the base and theother hand holding the arm. Properly store the microscope by lowering the nosepiece, turning off the light source, and placing the objective lenses on the lowest setting.

How would you use stage clip when studying a specimen under the microscope?

Place the microscope slide on the stage (6) and fasten it with the stage clips. Look at the objective lens (3) and the stage from the side and turn the focus knob (4) so the stage moves upward. Move it up as far as it will go without letting the objective touch the coverslip.

See also  Should I Export 4K As 1080P?

What are the steps to using a microscope quizlet?

Terms in this set (16)

  1. Plug it in and turn light on to make sure it works.
  2. Lower stage or raise body tube using course adjustment knob.
  3. Place slide onto stage clips.
  4. Look through microscope under low power, turn course adjustment knob to find and focus in on object.
  5. Adjust light using diaphragm if necessary.

Contents

This entry was posted in Mounts & Rods by Silvia Barton. Bookmark the permalink.
Avatar photo

About Silvia Barton

Silvia Barton is someone who really enjoys smart devices. She thinks they make life a lot easier and more fun. Silvia loves to try out new gadgets and she's always on the lookout for the latest and greatest thing in the world of technology.