The base rail is the board at the bottom of the guardrail that is located beneath the balusters and on top of the stringer. The base rail runs up the staircase and is supported at each end by a newel post.
What are the pieces of a railing called?
The term baluster is interchangeable with the word spindle. A balustrade is comprised of an assembled top rail, balusters or spindles and often a bottom rail, posts, post caps, and decorative finials. It is a composite made up of individual parts, such as the balusters and a railing/handrail.
What are the parts of a staircase railing?
Stair Parts Names and Identification
- Spindles—the vertical supports that sit between a handrail and base rail.
- Base rail—sits on top of the string or along a landing.
- Handrail—a rail that sits on top of the baluster/spindles.
- Newel post—the vertical post that supports the handrail at the top and bottom of the stairs.
What are the parts of a deck railing?
A wooden porch railing consists of five basic parts: posts, top rails, bottom rails, balusters and railing cap. Other decorative elements may be added, such as post caps, but are not necessary for a basic, sturdy design. The posts attach to the deck and provide the support for the entire framework.
What are the parts of a banister called?
Banister. The banister refers to the system of parts that combine to make the stairway. A banister is usually the combination of handrail, newels, stair treads, balusters and assorted trim pieces.
What is base rail?
What is a Base Rail? The base rail (also known as bottom track) runs up a staircase on the top of the stair string, and continues along the landing where there is one. Spindles or panels are fixed into or onto to the base rail, and it is supported at either end by newel posts.
What are the 3 main parts of a guardrail?
There are three main parts of a guardrail: The top rails, the midrails, and the vertical posts.
What are the slats in a railing called?
A baluster is a vertical moulded shaft, square, or lathe-turned form found in stairways, parapets, and other architectural features. In furniture construction it is known as a spindle. Common materials used in its construction are wood, stone, and less frequently metal and ceramic.
What do you call the parts of stairs?
Staircase Basics
The riser is the vertical surface of the stair. The tread on the other hand is the horizontal surface of the stair and the part of the stair you step on. Nosing is the portion of the tread that overhangs the front of the riser. Often a stair builder will talk about the rise and run of the stair.
What is a balcony railing called?
A balustrade is a name for that railing on a balcony, porch or terrace. It can be indoors or outdoors.
What is the bottom of the deck called?
Concrete footings are the base of the deck and typically the very first step. Contractors pour concrete according to local building codes and your area’s frost depth. Footings hold up the post and post anchors. A deck’s footing is the absolute bottom layer, so they are pretty important from a structural perspective.
What are the parts of a deck called?
Components of the Deck
- Footing. – Most decks begin by pouring concrete footings and attaching post anchors.
- Post. – Posts are attached to the footings and hold the support beams up off the ground.
- Beams.
- Joist.
- Ledgers and header joists.
- Deck boards.
- Drainage system.
- Hidden fasteners.
What are deck components called?
3.) Beams. Beams, also called girders, are deck components that support the frame of the deck. Beams are installed alongside the rim joists (joists at the perimeter) or below the joists to support the frame of the deck.
What is the underside of a staircase called?
Spandrel. If there is not another flight of stairs immediately underneath, the triangular space underneath the stairs is called a “spandrel”. It is frequently used as a closet. —
What are railing spindles?
Balusters are the closely spaced supports used to hold up a waist-high handrail, safely containing people inside a staircase or patio deck. They are practical and decorative, providing style and support to the rail system. Balusters are attached to either the floor or secondary support called a base rail.
What is the difference between a railing and a banister?
As nouns the difference between banister and railing
is that banister is the handrail on the side of a staircase while railing is a fence or barrier consisting of one or more horizontal rails and vertical supports.
What exactly is a banister?
Definitions of banister. a railing at the side of a staircase or balcony to prevent people from falling. synonyms: balusters, balustrade, bannister, handrail. type of: barrier.
What term describes a guardrail system?
The ( Fall Protection in Construction ) is the term which relates to these mechanisms , i.e , guardrail system, a positioning system and a personal fall arrest system.
What is a guard rail system?
Guardrail systems are smooth-surfaced to protect employees from injury, such as punctures or lacerations, and to prevent catching or snagging of clothing.
Where should guardrail be installed?
Look for areas with high personnel traffic.
These are typically around entrance and exit doors, stairways, restrooms, and walkways. Any location within a facility where people are most likely to be or congregate — and should be segregated from vehicle or equipment traffic — is an optimal place to install a guardrail.
What is the difference between a baluster and a spindle?
A baluster and spindle is actually almost the same thing, but the word spindle is more commonly used because it is easier to remember and say. Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts.
Contents