What Is The Bottom Of A Staircase Called?

Spandrel. If there is not another flight of stairs immediately underneath, the triangular space underneath the stairs is called a “spandrel”. It is frequently used as a closet. —

What do you call the bottom of the stairs?

The landing is the flat flooring at the top and bottom of a staircase that serves as a resting place and provides access to rooms. A landing can also be part of the staircase where it makes a turn.

What is the bottom of the banister called?

A newel, also called a central pole or support column, is the central supporting pillar of a staircase. It can also refer to an upright post that supports and/or terminates the handrail of a stair banister (the “newel post”).

What are parts of stair called?

The Different Parts of a Staircase

  • Inner string (closed)/skirting board.
  • Outer string (open)
  • Tread.
  • Riser.
  • Newel Post.
  • Spindle.
  • Handrail.
  • Nosing.

What is a split staircase?

Split Stairs are also known as bifurcated stairs typically have a wide set of stairs starting at the bottom that ends at a landing partway up the flight. The stairs split at the landing into two narrower sets of stairs leading in opposite directions. .

What exactly is a banister?

Definitions of banister. a railing at the side of a staircase or balcony to prevent people from falling. synonyms: balusters, balustrade, bannister, handrail. type of: barrier.

What are the parts of a stair banister?

Banister. The banister refers to the system of parts that combine to make the stairway. A banister is usually the combination of handrail, newels, stair treads, balusters and assorted trim pieces.

See also  Does Coolpix B500 Have Manual Focus?

What are the parts of stair railing called?

Parts of a Railing System

  • Baluster. A baluster is a short and decorative post, pillar, or column in a series that supports the top rail.
  • Balustrade. A balustrade is a railing supported by a series of balusters.
  • Bottom Rail.
  • Guardrail.
  • Hinge.
  • Landing.
  • Lattice.
  • Newel Posts.

What is soffit in staircase?

The soffit is the underside of stair. Important Points.

What is baluster in staircase?

So, what exactly is a baluster? As mentioned above, a baluster is the support system of any staircase. More previously known as spindles, balusters hold up the handrail. They can be made of a multitude of materials, such as wood, glass, stainless steel, or wrought iron.

What is landing in staircase?

Landing or Platform
A landing is the area of a floor near the top or bottom step of a stair. An intermediate landing is a small platform that is built as part of the stair between main floor levels and is typically used to allow stairs to change directions, or to allow the user a rest.

What is a secondary staircase?

Staircases are considered secondary when they have a steep slope (45 °) and are intended for occasional use. These staircases are used to access mezzanine platforms. They use less floor space.

What is a double staircase called?

An imperial staircase (sometimes erroneously known as a “double staircase”) is the name given to a staircase with divided flights. Usually the first flight rises to a half-landing and then divides into two symmetrical flights both rising with an equal number of steps and turns to the next floor.

What is banister and baluster?

is that banister is the handrail on the side of a staircase while baluster is (architecture) a short column used in a group to support a rail, as commonly found on the side of a stairway; a banister.

See also  How Long Does Argus Pro Last?

What is a baluster vs banister?

Nowadays, baluster mean any brace between the handrail and footrail (or string) of a railing system. So, the banister is really the spindle. In general, the handrail, footrail, and balusters all components of a balustrade.Many people today call the whole system a banister and anything between the rails is a baluster.

What is a baluster vs spindle?

A baluster and spindle is actually almost the same thing, but the word spindle is more commonly used because it is easier to remember and say. Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts.

What is base rail?

What is a Base Rail? The base rail (also known as bottom track) runs up a staircase on the top of the stair string, and continues along the landing where there is one. Spindles or panels are fixed into or onto to the base rail, and it is supported at either end by newel posts.

What is Scotia in staircase?

Scotia Moulding – The timber moulding that sits around a cut string staircase. Soffit – The visible sloping under-surface between stair strings. Spindles – Turned, carved or otherwise vertical sections placed between the handrail and the stair tread or string. Also known as balusters.

What are soffits?

What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the house eaves or the rafters of your roof. The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”.

See also  How Do You Get Rid Of Sensor Dust?

What is open newel stair?

Definition of open-newel stair
: a stair having successive flights or a continuous spiral surrounding a space left open between the strings.

What is another word for balusters?

What is another word for balusters?

bannisterUK banisterUS
railing guardrail
handrail baluster
bannistersUK banistersUS
bar barrier

Contents

This entry was posted in Mounts & Rods by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!