Electric bikes typically come with a 48-volt or 52-volt battery. The difference between the two is power and performance: A 52V battery delivers better performance. A higher-voltage battery provides greater efficiency, with the battery using less electricity to provide the same or better power for the bike.
What is a good voltage for an eBike?
Volts are also a way to describe how much pressure can be contained in a battery. Battery power is often measured in sequences of 12V, 24V, 36V, and 48V. The most common voltage for an eBike is 24 Volts – just enough for cruising around town.
Is 36V or 48V better?
A battery with a higher voltage would offer more power.A 36V e-bike battery will allow you to draw a lesser critical current, typically around 15 amperes whereas, a 48V e-bike battery will allow more current in the range of 10 40 amperes. It means you can go faster with a 48V E-bike battery.
Is 250W enough for electric bike?
When it comes to choosing a motor for your e-bike, bigger isn’t always better. Traditional motors range from 250W-500W, but as the e-bike industry grows, so is motor power.A 250w motor is sufficient for general commutes, while upgrading to a 350W or 500W is beneficial for those who will be doing a lot of uphill rides.
How many watts should an electric bike be?
500 watts is enough power for most electric bikes for general riding and hills. It is the minimum power you should get if you are a heavier rider over 250 lbs. It will give you a good amount of assist on hill climbs and will be able to go up most hills on motor alone.
Is 350 watts enough for ebike?
If you’re of average weight, about 150 lbs, a 350 watt motor will have enough power for flat roads with a few moderate hills tossed in. You may have to pedal with the motor to get up some hills, but the beauty of an electric bike is that they assist you in such tasks.
Can I use a 36V battery with a 48V motor ebike?
So, your 36V 1kW controller will likely be a 28A controller. This means your 48V motor will not be 1000W on that controller, it will only be 750W. That means that while the controller won’t be overloaded the maximum power output might not be sufficient for your needs.
How fast is a 48 V electric bike?
Most ebikes have a top speed of 20 to 25 mph. 36 or 48 volts, it doesn’t matter.
How can I reduce 48V to 36v?
Simplest way to reduce voltage from ~48v to ~36v
- Input is 39-55v, output needs to be between 29-44v.
- Current on the wire is 80-120ma.
- It would be great it if this could be done proportionally, or with a constant voltage drop, instead of just regulating to a set output.
How long will 48V 20ah battery last?
So 48 (V) times 20 (Ah) equals a battery that can give 960 watts for 1 hour.
What is the difference between a 250w and 350W motor?
Well, they are programmed slightly different. The 350w speed pedelec has an assisted speed to 45 km/h and the 250w motor is assisted to 25 km/h. Everything else is exactly the same.
So exactly what is the difference you may ask?
| Bosch Performance 350w | Bosch Performance CX 250w | |
|---|---|---|
| Assistance | 275% | 300% |
| Torque | 60Nm | 75Nm |
How fast can a 750 watt bike go?
approximately 28 mph
A 750w electric bike goes approximately 28 mph (45 km/h) on flat ground.
How fast is 250 watts in mph?
A 250-watt motor, if you’re doing full throttle, is going to be able to get you to a top speed of, let’s say, 15 miles an hour. If you’re looking at a 500-watt motor, that’s gonna be able to get you to a top speed of about 20 miles an hour.
How fast can a 1200W eBike go?
If your route is uphill and you need speed, we advise our 1200W ebike conversion kits. The average speed you will get is between 25-30mph. Now with the 1500W motors, you can expect an average speed of 35mph. We recommend this motor to our riders who enjoy the high speed and performance.
How far can a 500W eBike go?
Standard e-bikes with 400-500W batteries would ride up to 100-120 km on one charge. Simple city e-bikes would normally run 50-60 km on a single charge. Of course, the better the battery, the wider the range of hours the e-bike will ride on one charge.
How many watts is 20 mph?
Cycling Power
| Speed – kmh (mph) | Power (watts) | Increase in power needed to increase speed by 2.5kmh |
|---|---|---|
| 20 (12.5) | 75 | |
| 22.5 (14) | 95 | 20 |
| 25 (15.6) | 120 | 25 |
| 27.5 (17.2) | 148 | 28 |
How fast is 350 watts in mph?
The 350W and 500W versions are rated as Class 3, meaning they could achieve a top speed of 28 mph.
How fast can a 5000w ebike go?
Top speed: 100-80km/h(65-50mile/h) with 26inch wheel or 29in 700c mountain bike wheel; Huge torque, 155N./M, good ability to climb hills; LCD display shows battery power level, time, speed, mileage, gear.
Can a 48v controller handle 36v battery?
Re: 36v motor with 48v controller
YES! I do IT currently! 33km/h in 36v regen -> 43km/h in 48v regen, no problem.
Can I charge a 36 volt battery with a 48 volt charger?
Generally speaking, yes, yes it will. No matter what kind of battery you’re charging, if you hook up a 36v battery to a 48v charger and let it charge to completion, you’re going to ruin your battery.
How fast does a 1000w electric bike go?
roughly 35mph
While it might not seem that fast when compared to driving, a 1000-watt e-bike equates to a speed of roughly 35mph. These powerful e-bikes are typically used for off-roading activities and rough terrain, as opposed to a routine commute.
Contents