Surveillance Brands – Default Username and Passwords
| Brand | User Name | Password |
|---|---|---|
| Samsung | root | 4321 / admin |
| Samsung | admin | 4321 / 1111111 |
| Sanyo | admin | admin |
| Sentry360 | Admin | 1234 |
How can I unlock my DVR admin password?
If you forgot the admin password of DVR or NVR, you can reset the password by scanning the QR code generated on the local GUI of the device. You should have allowed the Mobile Client to access your phone’s camera.
What is the default password of DVR?
DVR default password list (2020)
| DVR | USER | PASSWORD |
|---|---|---|
| Hikvision | admin | 12345 |
| Honeywell | Admin | 123456 |
| Ivio | admin | |
| Multitoc | admin | 88888888 |
How do I reset my Samsung DVR to factory settings?
Here’s the step-by-step to reset a Samsung DVR.
- Connect a monitor to the DVR and turn the device on;
- Use the remote control or device’s front buttons;
- Press Return > Freeze > Alarm > Freeze > Alarm > Freeze > Return;
- Confirm you want to load the factory default settings.
What does default password null mean?
null password means that no password is to be written in password field.
What is the default password for H 264 DVR?
1. Use the DVR factory default password
| DVR | User | Password |
|---|---|---|
| FVN | admin | 123456 |
| HDL | admin | 12345 |
| Hikvision | admin | 12345 |
| Ivio | admin |
How do I reset my provision DVR password?
Password Recovery Procedure
- In the login panel click on the Restore password button to open the recovery password wizard.
- The simplest way to recover your password is to answer the security question.
How do I log into my CCTV DVR?
How to view your IP camera remotely via a web browser
- Find your camera’s IP address.
- Open a web browser and type the IP address.
- Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
- After you change the port, you will need to reboot the camera in order to save the changes.
What is ZOSI default password?
In the DVR login screen input the username admin and the Super Password that was created by the SPD App and press the login button. Next time you reboot the DVR, the username will be admin with blank password. (no password, just hit the login button).
How do I reset my Samsung Wisenet camera?
Here’s the process to reset the camera:
- Remove the dome to locate the reset button.
- Press and hold the reset button for 5 to 20 seconds.
- Wait until the LED turns off or you for a click sound.
- Release the button.
How do I reset my iPOLiS password?
Enter the password to login iPOLiS Device Manager and click [Login]. The default password is 4321. You can change the password after login the application. While the [Auto Login] is checked, login process will be skipped from the next access.
How do I reset my H 264 DVR password?
Password Reset Instructions for iDVR-PRO 960H / HD / H. 264 CCTV DVRs
- First, make sure that the unit is turned off.
- Then press and hold any button on the included infrared remote control.
- While holding the button on the remote, power on the unit.
- You should hear a single beep followed by a double beep.
How do I reset my Q See DVR?
Press and hold the reset button for 15 seconds in order to reset the camera to its original factory settings. Q-See is always here to answer your questions and take your valued suggestions.
What is the default username and password?
Try a common username and password combination: By default, many routers use a blank username and the password admin (don’t type the quotes), the username admin and a blank password, or admin as both the username and password.
What is the meaning of default password?
A default password is a standard pre-configured password for a device. Such passwords are the default configuration for many devices and, if unchanged, present a serious security risk.Default passwords are intended to be place holders and used only for the initial setup of hardware or after a factory reset.
What does password Cannot be null mean?
If you get the following error message: ‘NULL’ is not valid for password ‘password’, in table: ‘users‘ This means there is a literal password value of NULL in /etc/op5/auth_users.
What is the default password of Dahua DVR?
If you firstly use the Dahua DVR, but don’t know the default account info, please try the following default accounts: admin/admin admin/123456 (master account of local and network accessing) 888888/888888 (local administrator)
What is the super password for Swann?
12345
The default, all-access username is admin, the default password is 12345.
How can I change my DVR software?
You can use the DVR boot logo change software to connect to the device and upload a . bmp or . jpeg file.
Here are the steps to change the DVR boot logo:
- Open the Device Manager software.
- Click the “Browser” button.
- Choose the new logo.
- Click the “Upgrade” button.
How do I know my CCTV password?
Sometimes you have an IP camera just in front of you but have no idea how to get access to it just because you lost the camera default password.
IP camera default password list.
| Camera Manufacturer | Username | Password |
|---|---|---|
| GVI | Admin | 1234 |
| HIKVision | admin | 12345 |
| Honeywell | administrator | 1234 |
| Honeywell | admin | 1234 |
How do I access my DVR?
Login to your DVR by pressing the menu button on the DVR or on the wireless remote control. When you are prompt to enter a password, just press the OK button on the DVR or remote. The default admin password for the DVR is blank. If you have already setup an admin password for your DVR, then enter this, then press OK.
Contents