Emtek CF (Concealed Fastener) Mechanism Simply means that the screws on the interior, that are usually exposed, will now be concealed.
What does CF mechanism mean?
CF Mechanism: Emtek’s Concealed Fastener Mechanism (CF Mechanism) is an optional upgrade to your order and consists of concealed screws (no exposed screws).The CF Mechanism is available for all Brass, Stainless Steel, Bronze and Crystal interior passage, privacy & dummy locksets.
What is CF mechanism on door?
CF Mechanism:
The CF-Mechanism is an upgrade for Emtek passage and privacy knobs or levers. CF stands for “Concealed Fastener”. A standard Emtek passage or privacy set will have two visible screwheads on the interior rosette. The CF-Mechanism conceals those screwheads for a nice, clean appearance.
What is emtek 28 degree latch?
28 degree latch: A latch that requires less rotation on the handle to disengage the latch mechanism. Useful for people with ergonomic concerns, like users who suffer from arthritis.
How do you remove an emtek door knob?
How to Remove an Emtek Lockset
- Locate the slot in the side of the Emtek lockset door shank and depress the button on the inside of the slot with a small screwdriver.
- Take the doorknob off the latch assembly and remove the mounting plate by hand.
How do I change the code on my emtek lock?
Remove power (disconnect 9V battery) from Lock Press and Hold EMTEK button While continuing to hold EMTEK button, restore power (reconnect 9V battery) Continue to hold EMTEK button for 3 seconds 1 Green LED Flash and 2 short beeps followed by 1 Green LED Flash and 2 short beeps indicates the lock has been
What is Emtek hardware made of?
Depending on the style of hardware ordered, our Emtek hardware could be made from 1 of 3 types of metal. There is a solid forged brass collection, a wrought steel collection or a sandcast bronze collection. Regardless of metal type, all Emtek hardware is completely solid.
How does a privacy door knob work?
Privacy knob sets for interior doors are equipped with a keyless lock on the inside knob; in these knob sets, turning or pushing a button on the inside knob prevents the outside knob from turning and opening the door, but turning the inside knob releases the lock and allows the door to open.
What is door handle projection?
Projection. The distance that a handle projects or stands proud from the door face. The measurement is usually quoted from the door to the outside point of the handle.
Can you rekey an emtek lock?
Unlike their more bulky commercial cousins, the Emtek electronic locks are smaller and look at home on the wooden door typical of a residential property. As a backup to technology, the EMtouch still has a traditional keyed cylinder which any locksmith can replace or rekey if needed.
Are emtek levers reversible?
Emtek Freestone Reversible Non-Turning Two-Sided Dummy Door Lever Set from the Urban Modern Collection.
How do you remove rosettes from door knobs?
To remove the rosette, all you have to do is gently pry with a flat screwdriver between the little slot and edge of the rosette as shown. Be careful not to scratch up your door or hardware. When you pry on the rosette it should pop off the base plate.
How do I find my emtek code?
Emtek electronic locks (preset) programming codes are randomly generated and located on the inside trim plate of each lock. So check the inside trim plate of your lock to find the preset programming code.
What keyway does emtek use?
Schlage C keyway
The Emtek has a Schlage C keyway so this kit could be used to rekey it. You must use the key supplied with the kit for it to work. 1 of 1 found this helpful.
Who owns Emtek?
Emtek is a part of ASSA ABLOY, the global leader in door opening solutions.
Does Baldwin own Emtek?
Baldwin Hardware
Stanley Black & Decker acquired the company in 2003 and, in 2012, moved manufacturing to Nogales, Mexico.
Where does Emtek ship from?
All Emtek orders are assembled and shipped from California. Because of the quality of the locks and their customizable nature, doorknob orders are assembled at the time of the order.
What is a passage latch?
Passage door knobs are similar to dummy door knobs. They don’t lock but are used to open doors and go between rooms. Passage door knobs are ideal for interior hallways, closets and other rooms that don’t need privacy locks. They’re also called unkeyed knobs.
How can I open privacy lock without key?
wire hangers, paperclips, bobby pins, ink cartridges, etc. To unlock a button-type privacy lock, take your tool (small screwdriver, paperclip, or other thin objects) and insert it into the hold as far as you can.
How are cabinet knobs measured?
Measure the projection of the cabinet knob by placing the tip of the measuring tape against the flat front of a cabinet door and pulling the measuring tape out to the face of the knob. The projection or depth of the knob is at the farthest point that it protrudes out from the cabinet door.
What does fixing Centres mean?
Measure the distance between the two screws from the centre of each screw. This will give you your ‘fixing centres’ and is the measurement you need when buying your new handles. Our handles are all listed with a measurement appended to the title. This measurement is the ‘fixing centre’, NOT the total length.
Contents