Submasters: A submaster is one or more channels, recorded at proportional levels, which are controlled as a single unit. Submasters are usually controlled by physical sliders; some consoles also allow the user to control them via the numeric keypad.
What does a submaster do on a lighting board?
The SubMasters can control different groups of lighting channels while the Grand Master adjusts the intensity of every channels as it leaves the lighting desk.
How do I record a submaster?
Note: Use Solo to record specific channels into the submaster (rather than the full stage look).
Using Except to record a submaster.
Keystrokes: | Action: |
---|---|
1. Press [Stage]. | Selects Stage display mode |
2. Select desired channels and set channel levels. |
Do you have to write backwards on a lightboard?
Do I need to write backwards? No! You write normal and the video image is reversed so your viewers see it correctly.
How do you set up a lightboard?
Lightboard:
- Drill a hole near the corner of one of the timber lengths to feed the wire for the LED lights.
- Lay the LED light strip in the channel and adhere with the adhesive backing.
- Glue and screw 3 sides of the frame together.
- Run the LED leads down one side of the frame and out the hole. (
What do you mean by cue?
Definition of cue
1a : a signal (such as a word, phrase, or bit of stage business) to a performer to begin a specific speech or action That last line is your cue to exit the stage. b : something serving a comparable purpose : hint I’ll take that yawn as my cue to leave.
What does a cue-to-cue look like?
All actors can assume that a cue-to-cue will mean a lot of starting their lines or a scene and stopping, starting over, jumping ahead and skipping lines, a lot of standing around, moving around and waiting until the director wants you to do something or needs you to do something else.
What is cue number?
Cues have established numbers, generally starting from 1 and progressing in integers. If an extra cue is added after the initial list is set, it may be divided by a decimal or a letter. for example, a sequence may go 37, 37.3, 37.7 or 51A, 51B, 51C.
What are stage lights called?
Stage lighting instruments (lanterns, or luminaires in Europe) are used in stage lighting to illuminate theatrical productions, concerts, and other performances taking place in live performance venues.In the UK, they are called “lanterns” or “luminaires”.
What is DMX lighting?
DMX is an acronym for Digital Multiplex. It is the standard digital communication protocol that is used to remotely control intelligent lighting fixtures.
How much does a lightboard cost?
While there are premade lightboards available for purchase, the lightboard we present can be built from a few basic supplies. Professional-grade lightboards are available for $3000-$15,000.
What are Lightboards?
Lightboard is a glass chalkboard pumped full of light. It’s for recording video lecture topics. You face toward your viewers, and your writing glows in front of you.
Which glass is used for lightboard?
Specifications. The glass used in a lightboard should be low-iron, which is known as ultra-clear glass. Starphire is one specific brand of ultra-clear glass, though there are many others. Low-iron glass has greater optical clarity, allowing edge lights to illuminate writing across the board evenly.
What are the different sizes of light boards?
We’d recommend the following minimum backdrop sizes: 35 and 45 tabletop lightboards: 4×8 ft. 66 and 82 lightboards: 10×10 ft.
Lightboard Studio Layout
- 35: 7’D x 5’W (2.2m x 1.5m)
- 45: 8’D x 6’W (2.5m x 1.8m)
- 66: 11’D x 8’W (3.4m x 2.5m)
- 82: 12’D x 9’W (3.7m x 2.8m)
- 95: 13’D x 10’W (4.0m x 3.1m)
What is a lightboard studio?
The Lightboard Studio contains LED lighting on specialized glass to create a transparent white board that illuminates your writing while recording the board and your lecture. The instructor faces the camera and writes normally on the transparent white board that will be flipped in the resulting video.
Contents