The split spindle is designed to replace the solid spindle of a door handle allowing the external handle to operate the lock mechanism with a cylinder key only. The inside the handle can be operated as normal for a quick and easy exit.
How does a split spindle door lock work?
Inline Split Spindle Door Handles
The lockcase is designed in such a way that the central drive where the spindle fits into can operate independently each side. In other words one spindle can turn the lock while the other spindle doesn’t move. A spring pushes the spindle into the middle to engage.
What is a double spindle door lock?
Dual spindle refers to there being two separate spindles, usually used in lever pad door handles which are offset (different heights). Changing From Single to Split Spindle Operation.
What is a spindle on a lock?
A spindle is a rod of metal, square in section, that is used to connect two door knobs together. It passes through the mortice latch or tubular lock (located within the door) and the two handles slot on either side of the door.
How do you fix a split spindle?
Use a simple procedure to replace a broken spindle.
- Open the door part way.
- Locate the small setscrews or hex bolts at the inner portion of each door knob.
- Pull out both sections of the broken spindle from the door lock.
- Fit one end of the new spindle fully into the square port at the inner end of a door knob.
What is a split follower lock?
A lock follower in two parts to enable each of the handles on the door face to have a different action. e.g. the inside handle may operate the shoot when the outside one is made inoperative.
What is a slam lock?
To put it simply, a slam lock is a unique locking system that will automatically lock a vehicle door immediately after it is shut.
What is a slam lock front door?
4. SLAM LOCK – For super-fast instantaneous locking, slam locks activate the lock hooks as soon as the door is closed no need to lift the handle. You’ll need a key to open the door from the outside, as well as bolt the door from the inside.
Why are some door spindles split?
The split spindle is designed to replace the solid spindle of a door handle allowing the external handle to operate the lock mechanism with a cylinder key only. The inside the handle can be operated as normal for a quick and easy exit.
What is an offset door handle?
upvc offset door handles are more widely known as lever pad door handles with a pad on the outside. Some pad door handles are inline with the lever but some are off-set for key-entry. If your upvc pad handles don’t have offset spindles then you may need.
What is a lever pad door handle?
Why are lever pad upvc door handles used on a door?This means that the lever on the inside and the pad on the outside act independently from each other. The benefit being that when the door is closed the pad will not open the door without the key.
Are slam locks any good?
If a slamlock is fitted, the door of the vehicle automatically locks when it closes. It’s really useful for the multi-drop driver or couriers.The slam locks can be bypassed from inside the vehicle if you get locked in, meaning your safety is never at risk.
Can you pick slam locks?
Rim cylinders and slam locks can typically only be picked in a single direction and if you get the wrong direction the pins won’t bind or reset when you release tension.
What is thumb lock?
Definition of thumb lock
: a lock that can be released by pressure with the thumb.
What is a 5 point Mortice lock?
Five lever mortice deadlock
The five lever mortice deadlock is a type of door lock commonly fitted to wooden doors.It works by inserting and turning the key to move the five levers into the correct position, allowing the bolt to be locked or unlocked.
How do modern doors lock?
The first is the lever-lever system. You physically have to lift the handle on leaving or closing the door on entering the house to engage the multi-point locking mechanism and turn the key to lock it.Mark continued: You’re pulling the door closed and only engaging the latch.
Do door handles come with spindles?
A. All sets of door handles are supplied complete with the relevant spindle required. You would only need to replace a spindle if the original one supplied has been lost or is not long enough to fit an unusually thick door.
Why does my door handle keep falling off?
The locking mechanism on the house door handle might fail to properly open and latch the door. Typically the problem is the result of a missing or loose screw in the house door plate. You can save money by repairing this problem instead of purchasing a new door or hiring a carpenter.
Why does my door knob keep falling off?
There are several reasons why a doorknob becomes loose and falls off. For instance, there may be a missing or loose screw on the door plate. Additionally, there may be dirt or other obstructions that hinder its useability, making it loose and fall off.
How do you fix a lock that won’t turn?
If the key won’t turn in the door lock, the problem could be dirt or dust in the cylinder causing the pins to be stuck in a partially raised position. If that’s the case, it may be an easy fix. You can spray dry lubricant into the keyway and then insert the key a few times to get the lubricant working.
Contents